Notes

Adult-onset Still's condition together with multiple lymphadenopathy: an instance report along with literature evaluate.
Two coupled exciton-polariton condensates (EPCs) in a double-well photonic potential are suggested to form the optical Josephson oscillation (JO) whose dependences on the pump arrangement, the potential geometry, and the exciton-photon detuning are studied through the Gross-Pitaevskii equations. When the pump detuning is slightly positive with respect to the polariton energy and the phase difference between the two EPCs is near π/2 (both are controlled by the pump beams), the system demonstrates the optical JO. The optical JO tunneling strength (J) depends on the distance (d) and barrier (Λ) between the two wells, for which an empirical formula is fitted, i.e., J≈0.42exp⁡(-d Λ/18.4) with the energy and length units in meV and μm. Since the double-well potential adopted is general, this fitting relation can show a guidance in practice for designing the optical devices based on the optical JO.This work investigates the excitation of dense comb-like enhanced leaky mode resonance (eLMR) in tilted fiber Bragg grating (TFBG) integrated with indium tin oxide (ITO) nanocoating. The ITO overlay leads to a large reduction in mode loss and a great increase of propagation length for s-polarized leaky modes, which means the leaky modes become guided. The guidance of leaky modes enhances significantly the interaction with the core guided mode, which leads to the generation of strong dense comb-like eLMR. The results show that the ultra-narrow eLMR bands present promising sensing performance with an extended measurement range and provide advantages of high Q measurement over the case of surface plasmon resonance (SPR) and lossy mode resonance (LMR). The similarities and differences between the eLMR and SPR and LMR are also discussed. This study offers new opportunities to develop eLMR-based multifunctional fiber-optic devices with high performance.We demonstrated a high-speed 1×2 single-input and multiple-output (SIMO) diffuse-line-of-sight (diffuse-LOS) ultraviolet-C (UVC) solar-blind communication link over a distance of 5 meters. To approach the Shannon limit and improve the spectral efficiency, we implemented probabilistically shaped discrete multitone modulation. As compared to a single-input and single-output (SISO) counterpart, we observed significant improvement in the SIMO link in terms of the angle of view of the receiver and the immunity to emulated weather condition. A wide angle of view of ± 9° is achieved in the SIMO system, with up to a 1.09-Gbit/s achievable information rate (AIR) and a minimum value of 0.24 Gbit/s. Moreover, the bit error rate of the SIMO link in emulated foggy conditions is lowered significantly when compared to that of the SISO link. This work highlights the practicality of UVC communication over realistic distances and in turbulent environments to fill the research gap in high-speed, solar-blind communication.Over the past years, ultrafast lasers with average powers in the 100 W range have become a mature technology, with a multitude of applications in science and technology. Nonlinear temporal compression of these lasers to few- or even single-cycle duration is often essential, yet still hard to achieve, in particular at high repetition rates. Here we report a two-stage system for compressing pulses from a 1030 nm ytterbium fiber laser to single-cycle durations with 5 µJ output pulse energy at 9.6 MHz repetition rate. In the first stage, the laser pulses are compressed from 340 to 25 fs by spectral broadening in a krypton-filled single-ring photonic crystal fiber (SR-PCF), subsequent phase compensation being achieved with chirped mirrors. In the second stage, the pulses are further compressed to single-cycle duration by soliton-effect self-compression in a neon-filled SR-PCF. We estimate a pulse duration of ∼3.4 fs at the fiber output by numerically back-propagating the measured pulses. Finally, we directly measured a pulse duration of 3.8 fs (1.25 optical cycles) after compensating (using chirped mirrors) the dispersion introduced by the optical elements after the fiber, more than 50% of the total pulse energy being in the main peak. The system can produce compressed pulses with peak powers >0.6 GW and a total transmission exceeding 66%.We investigate theoretically the impact of Rashba spin-orbit coupling (RSOC) effect to two-photon absorption (TPA) and its dependence on the polarization direction of the incident light in monolayer black phosphorus (BP) starting from an anisotropic two band k·p model. It is found that the TPA is enhanced several times by RSOC effect which is tuned by the external electric field. And the TPA response shows highly anisotropic, changing periodically with the polarization direction of incident linearly polarized light as the function of cos4θ approximatively. The TPA coefficient reaches its maximum when the polarization direction is aligned along the armchair direction (x-direction), while falls into its minimum along the zigzag direction (y-direction).We report a new microfabrication method of multifocal microlens arrays (MF-MLAs) for extended depth-of-field (DoF) using multilayer photolithography and thermal reflow. Microlenses of different focal lengths were simultaneously fabricated on a single glass wafer by using repeated photolithography with multiple photomasks to define microposts of different thicknesses and concurrent thermal reflow of multi-stacked microposts. The diverse lens curvatures of MF-MLAs are precisely controlled by the thickness of the micropost. Hexagonally packaged MF-MLAs clearly show three different focal lengths of 249 µm, 310 µm, and 460 µm for 200 µm in lens diameter and result in multifocal images on a single image sensor. This method provides a new route for developing various three-dimensional (3D) imaging applications such as light-field cameras or 3D medical endoscopes.We optically assess Fresnel zone plates (FZPs) that are designed to guide cold atoms. Imaging of various ring patterns produced by the FZPs gives an average RMS error in the brightest part of the ring of 3% with respect to trap depth. CAY10572 This residue is attributed to the imaging system, incident beam shape and FZP manufacturing tolerances. Axial propagation of the potentials is presented experimentally and through numerical simulations, illustrating prospects for atom guiding without requiring light sheets.An ultra-sharp multimode waveguide bend (MWB) based on a multimode waveguide corner-bend (MWCB) is proposed and realized. With the present MWCB, total internal reflection (TIR) happens and the light propagation direction of all the mode-channels can be modified with low excess losses (ELs) and low inter-mode crosstalk (CT) in the optical communication bands from 1260 nm to 1680 nm. For the MWCB designed for the TE0 and TE1 modes, the ELs are less than 0.18 dB and the inter-mode CTs are less than -36 dB in the wavelength range of 1260-1680 nm. The measurement results show the fabricated MWCB works very well as predicted by the theory. It is very flexible to extend the present MWCB for more mode-channels by simply adjusting the core width. For example, the MWCB designed with a 35 µm-wide core has an EL less than 0.54 dB and inter-mode CT less than -24 dB for the ten TE-polarization modes (i.e., TE0∼TE9) in the wavelength-band of 1260-1680 nm. For the present MWCB, the fabrication is also very convenient because no tiny nano-structure and no additional fabrication steps are needed. It also shows that the present MWCB is not sensitive to the sidewall angles even when the angle is up to 8°. The proposed MWCB is promising for multimode silicon photonics because of the simple structure, easy design, easy fabrication as well as excellent performances in an ultra-broad wavelength-band.We investigate the enhanced four-wave mixing (FWM) process in a parity-time (P T)-symmetric optomechanical system, where an active cavity is coupled to a passive cavity supporting a mechanical mode. The passive cavity is optically driven by a strong control field and a weak probe field, and the mechanical mode is excited by a weak coherent driving field. By tuning the coupling strength between the two cavities with balanced gain and loss, we find that the FWM intensity can be significantly enhanced near the exceptional points (EPs) at low control power, which is about 12 orders of magnitude higher than that of the single-cavity case. Due to the interference effect induced by the optical and mechanical driving field, it is shown that the FWM intensity can be further enhanced or suppressed by tuning the amplitude and phase of the mechanical driving field. Moreover, the dependence of the FWM intensity on the frequency and power of the control field is also discussed. Our work provides a route to enhance the four-wave mixing process in a flexible way.We report on the crystal growth, spectroscopy and first laser operation of a novel double molybdate compound - TmKY(MoO4)2. This orthorhombic (sp. gr. Pbna) crystal exhibits strong anisotropy of the spectroscopic properties due to its layered structure. The maximum stimulated emission cross-section for the 3F4 → 3H6 transition is 2.70×10-20 cm2 at 1856nm with a bandwidth of >110 nm (for E || b). The lifetime of the 3F4 state is 2.29 ms. Crystalline films and plates (thickness down to 70 µm) of high optical quality are obtained by mechanical cleavage along the (100) plane. Continuous-wave diode-pumped laser operation is achieved in such thin films and plates yielding a maximum output power of 0.88 W at ∼1.9 µm with a slope efficiency of 65.8% and a linearly polarized laser output. Vibronic lasing is demonstrated at ∼2.06 µm. TmKY(MoO4)2 is promising for microchip and thin-disk lasers.We introduce a system that exploits the screen and front-facing camera of a mobile device to perform three-dimensional deflectometry-based surface measurements. In contrast to current mobile deflectometry systems, our method can capture surfaces with large normal variation and wide field of view (FoV). We achieve this by applying automated multi-view panoramic stitching algorithms to produce a large FoV normal map from a hand-guided capture process without the need for external tracking systems, like robot arms or fiducials. The presented work enables 3D surface measurements of specular objects 'in the wild' with a system accessible to users with little to no technical imaging experience. We demonstrate high-quality 3D surface measurements without the need for a calibration procedure. We provide experimental results with our prototype Deflectometry system and discuss applications for computer vision tasks such as object detection and recognition.We present an innovative spectroscopic method based on coherent optical frequency-modulated continuous-wave (FMCW) interferometry that can realize multi-point gas detection with high spatial resolution, high sensitivity, and high selectivity. This method takes full advantage of the intrinsic capability of spatial localization of the coherent FMCW, meanwhile efficiently decodes the spectral information from the reflected optical signals. Gas sensors are deployed by adopting bus topology, i.e., distributed along a single backbone fiber in the measurement arm of the FMCW interferometer. For validation, a multi-point acetylene gas sensing system with three sensing nodes is experimentally demonstrated. The transmission spectra of the three gas sensors are accurately extracted, and their corresponding gas concentrations are efficiently retrieved with a low crosstalk below -30 dB. The demonstrated system achieves a sensitivity of 55 ppm (noise equivalent absorbance of 0.004) over a distance of 52 m, with a sensing spatial resolution of 30 cm and a spectral resolution of 0.
Here's my website: https://www.selleckchem.com/products/pha-767491.html