Notes

The 9 Things Your Parents Taught You About Patio Door Lock Repair
Patio Door Lock Repairs

Over time, patio doors experience wear and tear that can cause locks that fail. There are a few easy steps you can take to ensure the security of your uPVC door.

These quick fixes can make your home safer regardless of whether you re-align the lock or clean the locking mechanism.

Clean the Lock

Patio doors are fantastic for letting the outdoors in while keeping the elements out. However, they can be an issue for security if the lock doesn't work correctly. Over time, wear, tear, cold and hot weather dirt, and other debris can cause your patio door lock to become difficult to operate. With a little effort you can ensure that your lock for your patio door always functions in a proper manner.

It is essential to first clean the patio door lock as well as all moving parts. This will help remove any coatings or dirt that could be preventing your lock from functioning properly. Begin by wiping all the moving parts of your patio door's lock with a damp cloth, then use a scouring pad or rough damp cloth to scrub any hard-to-reach areas of the door and frame that are covered in dirt. Then clean the lock using a dry towel to get rid of any remaining moisture. Let it air dry before using it.

If your patio door uses a pin-tumbler latch you can apply powdered Graphite on the key. You can also apply a Teflon lubricant like WD-40 Multi-Use Product. This kind of lubricant can be applied with ease and doesn't dissolve over time. If you are unable to locate an appropriate lubricant, you might use a pencil with a thick tip. Insert the pencil in the lock, and shake it around to spread the graphite.

The tracks for sliding patio doors also require regular maintenance to ensure they're free of dust, dirt and other debris. These tracks are particularly vulnerable to snow, ice, and other debris that could cause them to get stuck or to bind. This could make it difficult for your patio door to be opened and closed.

Sliding patio door track rails and rollers can be cleaned by removing any weather stripping that is damaged or dirty, cleaning them, then installing it. The same applies for patio door rollers, which can be cleaned and sprayed with non-stick lubricant to help them move freely.


Lubricate the moving parts

uPVC french doors, similar to sliding patio doors, work by using 3-4 or sometimes five-point locking mechanisms, which include the lock cylinder and handle operated by a key. They also require maintenance, including lubrication of the moving parts. This can be accomplished with the use of a thin oil, but never WD40. It is recommended to do it at least once per year.

If hinges that are sagging don't cause the issue, it could be that the door is misaligned. It may be rubbing against or catching the strike plate's hole in the frame. Remove the strike plate and employ a sharp tool to expand its mortise. This will permit the latch to fit into the hole, and prevent it from rubbing against the frame.

Measure the diameter of the cylinder using an object of wood or a book that fits into the gap above the adjustment screw. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw until the end cylinder.

Verify the lock's width

If your patio door latch is difficult to turn, even after cleaning and lubricating, there's a possibility that it's out of alignment with the strike plate hole. Verify that the door is properly balanced and whether the hinge screws are secure, but in many cases, moving the strike plate upwards or downwards could fix the problem.

Most of the time, the issue occurs when the lock's strike is too small for the latch to engage. In this instance, you'll need to enlarge the hole with a chisel or hammer and then test the latch to make sure that it contacts the strike plate smoothly without rubbing against or getting caught on the frame of the door jamb.

Before you purchase a replacement lock, you should first identify the type of mortise lock you currently have. This can be done by looking at the faceplate of the lock and determining whether it is square or round. Take a look at each screw hole in the existing lock, and note their size. This will help you to locate a replacement lock that is exactly the same size and fits into the hole you have already.

In addition to identifying the mortise lock that is currently in use, you should also examine it for any nicks or bends that may require repairing. A bent or damaged latch is more likely to break than one that's been used much, so be sure to replace the lock with a brand new one that is secure if you find any signs of damage or wear.

Once you've checked the lock and identified which kind of replacement you require now is the time to start working on the actual repair. The old spindle and handle must be removed from the patio door. Insert the new handle. Start by installing the inside handle. Align it with the spindle and then secure it into position using two screws or bolts. Once the handle in the interior is installed, you can install the handle on the outside and screw it in the position as well. Once you have completed these steps, test the handles to make sure they are able to open and close easily and that the latch works properly with the strikeplate.

Check the Strike of the Door.

The strike plate and door latch are two pieces which work together to secure the door. Misaligned strike plate and door latches will cause the latch to not latch the door properly. Fortunately, this issue is often easy to fix.

First, check the strike plate's holes for receiving to make sure they are clear of obstructions, such as dirt or plastic plugs. Then loosen the screws that hold the strike plate in place, allowing it to move vertically, but not removing it from the door frame. Then, adjust the strike plate to ensure that its receiving holes align with the latch hooks on the door latch. Once the strike plate is adjusted tighten all screws and test to see whether the door closes smoothly.

Door strike plates can be a bit difficult to locate for homeowners with sliding patio doors, but they're essential to lock and unlock your door. These plates are usually located at the top and bottom of the door jamb, where they serve as the door's latch. The door latch is inserted into this strike plate and creates the seal. If the strike plate is damaged, rusted, or not installed correctly, it may hinder the latch from locking the door securely.

One common reason for a patio door lock to become stuck or not close is a misalignment of the latch and the strike plate. This can be checked with the "lipstick" test. Apply a little lipstick across the edge of the deadbolt and then cover it with masking tape. When you shut the door the lipstick will leave an impression on the tape that will show exactly where the latch connects to the strike plate. If the mark is too high or low, you can adjust the strike plate.

If your sliding patio door locks aren't functioning properly they could be a problem in keeping your home safe from burglars. It is imperative to resolve this issue as quickly as you can. By following upvc patio door repairs near me , you'll be able to fix your patio door's lock and regain its functionality in a matter of minutes.

Website: https://www.repairmywindowsanddoors.co.uk/christchurch-patio-door-repairs-near-me/