Notes

10 Facts About Window Handles That Will Instantly Bring You To A Happy Mood
Upvc Window Handles Replacement

Changing your upvc window handles is a relatively easy process that requires only a few tools and steps. To ensure an efficient replacement, you must first identify the handle type and measure the spindle.

There are two main types of upvc handles; Espag and Cockspur handles. Espag handles come with a square 7mm spindle that is connected to the locking mechanism fitted to the frame.

Espag handles

Espag handles are a very popular choice for upvc and timber frames. They are designed to work with espagnolette multipoint locking systems. The handle is 7mm square shaft that protrudes out of the back and is then placed into the gearbox for a multipoint locking system inside the window. They also come in a variety of spindle lengths. This is because each type of window handle is attached to a multipoint locking system with the same layout, but with a slight variation.

The typical specifications for espag window handles include a push-button to lock the 'locked' closed position, key-locking and fire escape non-locking (where necessary). Some even meet Secure by Design standards, which can give you extra assurance. Typically, they are attached to the sash with two screws that are 43mm apart.

There are several variations to the espag window handle especially the in-line and the cranked version. In-line handles can turn both ways and vice versa, whereas those that are cranked only functional in the direction of the window's movement (i.e. clockwise or anti-clockwise). They can be attached to the window in either way, but it is essential that they are pointed in the same direction the old cockspur handle was.

When choosing an alternative window handle it is important to be thorough and determine the spindle's measurement. The spindle is a metal bar that protrudes out of the back of the handle. Its length can vary between 10mm and 55mm. It is the length that is visible when the handle is together in its intact state. It is important to measure this when buying a new handle since the spindle drives the lock within the window.

Certain manufacturers offer a magnetic espag handles that eliminate the need to cut spindles into sizes. This can simplify the fitting process as it is faster and easier to remove the old handle and put in a new one. It is nevertheless recommended to take the time to check the spindle length to ensure a smooth operation of your handle.

Cockspur handles

Cockspur handles are used on older uPVC and aluminium windows. they do not have an internal locking mechanism, but are considered safe due to the handle's nose is closed to a wedge-shaped block which is fitted into the window frame (this kind of handle is not to be confused with timber windows where there is a catch instead). Cockspur handles are still popular and come in a variety of styles to fit all kinds of doors.

They are an economical and easy option. They can also be key-locked to comply with the requirements of insurance. There's also a selection of handle nose sizes to suit different frames. A lockable version is also available, which adds an additional level of security to the window and is approved by Secured by Design.

These types of handles are attached to the sash of a casement or tilt and turn window by using a spindle which runs through the baseplate of the handle. The handle is operated by a lever on either side of the handle and the spindle of the handle engages with the wedge striker which is attached to the frame of the window to lock it into place. Cockspur handle kit are available in both left and right hand models. There are also a variety of nose heights that will fit most frames.

The right wedge block size is essential to a successful installation. This is a tiny piece of plastic that is in the form of a ramp that you can replace with a one slightly larger to ensure that the handle is properly closed across the gap to prevent draughts. The fixing positions of these handles are standard and usually range between 38mm and 58mm in diameter. You should be able locate the right replacement without much difficulty.

Another aspect to take into consideration when choosing the new set of cockspur handles is the spindle length. This is the distance between the handle baseplate and the point at which the shaft extends through the sash until it reaches the frame. It is essential to set this correctly to ensure that the handles function smoothly.

Tilt and Turn Handles

These handles are specially designed for tilt-and-turn windows. They come in locking, nonlocking or tilt safe versions. These heavyweight handles offer a strong grip and detents are located at 90 degrees. Available in different finishes such as black, white and gold. It is compatible with timber or PVCu tilt-and-turn windows.

These handles can be used to replace the cockspur made of upvc that was used on older windows, but without locks. These handles are not the same as espag upvc handles, as they aren't locked and work differently.

The mechanism called 'turn before tilting' lets the window open to the side and then drop into a ventilation or hopper-style position for fresh air. Repair My Windows And Doors of handle, also referred to as DK or dry keep window handle, is commonly used in older double glazed properties.

When replacing a tilt and turn window handle, there are several things to consider. First, you must ensure that the handle you select is compatible with your windows. This includes assessing the spindle size. The length of the spindle is the length of the steel rod that extends from the handle and into the locking mechanism. The longer the spindle is more secure, the safer it will be.

The handle itself is usually connected to the frame or base of your window by using a screw that is located either above or below it according to the design of the window. The screws can be removed with the help of a screwdriver, and after that the handle can be removed. Before you do this though it is recommended to put the handle in its open position, as this will make it easier for you to access both of the screw holes.

Once the handle has been removed you should be able see two more screws that need to be removed which will then reveal some screw caps with decorative designs. The handles can be removed by unwinding them using the flat-head screwdriver. Once the handles have been repositioned on your windows, you can replace the cap on the screw.

Measure the spindle length

The spindle of a window handle decides the manner in which it will open and shut. It is crucial to measure the length of the old handle and then compare it to the spindle length of the new one. This will ensure your new handle will fit into the window in the right way, and will be easy to open and close.

Whether you need a new set of handles or just want to enhance your uPVC windows' appearance, the kind of handle will have a major effect on how windows open and close. There are several handles to choose from, including inline espagnolette and cranked. There are also tilt-turn handles specifically designed to work with a tilt-turn uPVC window that can be opened both ways.

To replace the window handle first, you must locate the screw caps which hold it in place. These are located either above or below the window handle and can be removed using a screwdriver. After the screws have been removed, you are able to remove the handle and spindle from the window frame.

Then, take the handle out of the window frame and replace it with a new one. Be sure that the new handle is in the same place as the old handle and that the spindle aligns perfectly with the lock mechanism. Once the new handle is in place, it's time to put the screws back in and secure the handle. If you have screws that are missing, you can replace them.

It may be necessary to change the handles on your uPVC window if they break. The handle may break as a result of a strong impact or the female portion which the spindle is placed into could be worn down. This can be caused by someone in your household forcing the handle while it's locked.


If you are looking to replace your uPVC handle you should choose a high-quality one that will last a long time. You will save money in the end. It will also give your house a an updated and appealing appearance.

Here's my website: https://www.repairmywindowsanddoors.co.uk/walsall-window-handle-replacement-near-me/