Notes

Why Replacing Upvc Window Handles Can Be More Risky Than You Thought
Replacing Upvc Window Handles

Replacing window handles made of upvc is easy when you follow the correct steps. It is important to identify your handle type and determine the spindle size in order to buy the right replacement.

Begin by opening the door to allow access. Next, take off any screw covers above or below the handle with a flat-headed screwdriver or a butter knife.

Handle Identification

It's time to replace your double-glazed window handle if it fails or becomes difficult to operate. It's good news that replacing a window handle made from upvc is a DIY project that can be done quickly and cost-effectively. The most important thing is identifying the handle type and measuring the length of the spindle to make sure that the new handle is a good fit. Here's how you can do it:

The majority of uPVC window frames utilize either cockspurs or espag handles. Both have a mechanism that slots in the form of a square metal rod within the frame of the window. The length of the rod determines the operation of the window handle and whether or not it will lock. Try moving the handle around or locking it to determine whether it will open or close the window.

To replace a uPVC handle, you will need to lift the windows to access the screws that attach it to the frame. They are usually hidden beneath plastic screw covers, which can be removed easily using an screwdriver with a flat head. After the screws have been removed the handle should fall off easily.

Before you begin screwing into your new handle, make sure that it's the same length as the previous one. Visit Webpage don't want to end up with a handle that is too short or too long, as this could cause issues with the operation of your window and could lead to premature breakage. To avoid this, take a measurement of the length of the spindle from the base of the handle to the tip and ensure that the new handle has a matching length. You can also buy a handle with a longer or shorter spindle length, as is required by the window you have.

Identifying the Spindle

If you're replacing your windows with upvc handles, it's important to be aware of the type of handle you have for your window. This will help you find the correct replacement and ensure it fits perfectly. Identifying the type of handle is simple and usually it's possible to do this by taking a look at the handles themselves. You should also note whether the window is equipped with an locking mechanism or not. This could affect the ease of opening and closing the window.

If the handle is slack or isn't turning, then it's time to replace it. This is true in particular if the window is difficult to close or open, or if it is difficult to unlock. It's important to replace the handle before it breaks completely, since this could be a risk for children and pets.

Find the spindle on the old handle before buying new upvc handles. It's on the back of the base of the handle and is crucial to get it right to ensure that the new handle will fit properly. The ideal spindle will have seven millimeters of cross-section.

Once you've established the length of the spindle then move the handle to the same location as the old one. Make sure it's in an open position, and then insert the spindle into the same hole as the previous one was. Screw the new handle into place, and then put the caps back on when necessary. Test the new window handle before wrapping your tools to ensure it functions smoothly and is closed properly. It's also an excellent idea at this point to apply a silicone-based lubricant on the handle and all moving parts to ensure everything is working as it should.

Unscrewing Old Handle

There are indications that your window handle requires to be replaced, whether it is broken or loose, or is not working correctly. For instance, if it's difficult to open and close the window, this is a clear indication that the handle is not functioning properly. If, for instance, the lock won't turn to lock the window, it's another sign that it's time to replace the handle.

When you are changing the window handle, it's important to be cautious and take your time. This is due to the fact that window handles are quite heavy and can fall down on you if you're cautious enough. To remove the old handle, you'll need to remove the screw covers on the top and the bottom. Once these are removed, you are able to unscrew and take the handle out of the window.


You can choose between various sizes, styles and finishes when it comes to selecting a new handle. It is essential to determine the spindle's measurement and identify your handle type. This will determine the degree of compatibility a handle will be.

The proper size and style will make it simple to operate and secure the window. This is because the handle has a specific slot that it fits into on the gearbox of the window. Moreover, if you try to install a handle that's not the correct size, it might cause the window to become stuck or even break. Changing the handle on Everest uPVC Windows is easy and takes only five minutes. This is a great method to enhance the appearance of your window and functionality.

Installing the New Handle

When it comes to replacing window handles made of upvc, it is essential that the correct size handle is used. If the handle is not the right size, it will not fit well into the frame. This could result in excessive stress and premature breaking. This is particularly common when windows have to be closed and opened several times.

The first step is to get rid of the screw cover caps that are situated above and below the handle using a thin, narrow tool (for example a butter knife). This will reveal two screws that you will need to unscrew. Once the screws have been removed, you can begin dismantling the handle from the window mechanism. Be sure to keep the handle in place so that it does not fall and hurt you.

It is crucial to determine the spindle length prior purchasing replacement windows made of upvc. This can be measured either from the part of the handle that goes into the wooden frame, or from the length of the handle that extends from the back of the base of the handle. This information is essential when choosing a handle because different kinds of uPVC have different spindle sizes.

Espag handles, typically found on uPVC windows, feature seven-millimetre spindles that triggers the internal gearbox, which controls the multipoint locking mechanism to provide increased security. Cadenza handles come with a blade that slots in the lock mechanism. The fixing center can vary from 58mm to 62mm, according to the design. Cockspur handles have a long nose which locks over the shootbolt rods. Their fixing centers can vary from 58mm to 43mm.

Test the Handle

It is essential that the new window handle operates properly when it is replaced. It is essential to ensure that the new handle works properly. This involves turning the handle to turn on the mechanism and checking that the window closes and locks correctly. Anyone can replace upvc window handles. All you need is the right tools, a little patience, and a little knowledge.

The first step is opening the window to gain access to the screws that hold the handle in place. They are usually hidden beneath caps made of plastic or screw covers which are easy to remove using the help of a screwdriver. After the screws are removed, the handle will be able to easily slide away from the window frame.

The next step is to identify the kind of handle that's mounted on your window and measure the length of its spindle. This will allow you to purchase a replacement handle that is exactly the same size as the one you have. Espagnolette handles usually feature a spindle through the handle which controls the locking mechanism inside the window. These can be either left or right-handed, so it is essential to match the handedness of the handle and lock when replacing it.

Cockspur handles are usually fixed in the same manner as espagnolette handles, but they have different spindle lengths, and can be left- or right-handed. Once you've identified the handle type and measured the spindle length, it's simple to replace the cockspur handle.

It's a great idea to turn the handle to activate the lock after you've screwed it into position. Then, you can replace the screw cap, and verify that everything is working before covering it.

Here's my website: https://www.repairmywindowsanddoors.co.uk/salisbury-window-handle-replacement-near-me/