Notes

Adsorption involving Hg(Two) in remedy by mercaptofunctionalized palygorskite.
We propose a metasurface-based Lithium Niobate waveguide power splitter with an ultrabroadband and polarization independent performance. The design consists of an array of amorphous silicon nanoantennas that partially converts the input mode to multiple output modes creating multimode interference such that the input power is equally split and directed to two branching waveguides. FDTD simulation results show that the power splitter operates with low insertion loss ( less then 1dB) over a bandwidth of approximately 800 nm in the near-infrared range, far exceeding the O, E, S, C, L and U optical communication bands. The metasurface is ultracompact with a total length of 2.7 µm. The power splitter demonstrates a power imbalance of less than 0.16 dB for both fundamental TE and TM modes. Our simulations show that the device efficiency exhibits high tolerance to possible fabrication imperfections.Compressive spectral depth imaging (CSDI) is an emerging technology aiming to reconstruct spectral and depth information of a scene from a limited set of two-dimensional projections. CSDI architectures have conventionally relied on stereo setups that require the acquisition of multiple shots attained via dynamically programmable spatial light modulators (SLM). This work proposes a snapshot CSDI architecture that exploits both phase and amplitude modulation and uses a single image sensor. Specifically, we modulate the spectral-depth information in two steps. Firstly, a deformable mirror (DM) is used as a phase modulator to induce a focal length sweeping while simultaneously introducing a controlled aberration. The phase-modulated wavefront is then spatially modulated and spectrally dispersed by a digital micromirror device (DMD) and a prism, respectively. Therefore, each depth plane is modulated by a variable phase and binary code. Complimentary, we also propose a computational methodology to recover the underlying spectral depth hypercube efficiently. Through simulations and our experimental proof-of-concept implementation, we demonstrate that the proposed computational imaging system is a viable approach to capture spectral-depth hypercubes from a single image.Optical cavities in the near-concentric regime have near-degenerate transverse modes; the tight focusing transverse modes in this regime enable strong coupling with atoms. These features provide an interesting platform to explore multi-mode interaction between atoms and light. Here, we use a spatial light modulator (SLM) to shape the phase of an incoming light beam to match several Laguerre-Gaussian (LG) modes of a near-concentric optical cavity. We demonstrate coupling efficiency close to the theoretical prediction for single LG modes and well-defined combinations of them, limited mainly by imperfections in the cavity alignment.We investigate the parallelized performance of the conventional Kramers-Kronig (KK) and without the digital up-sampling KK (WDU-KK) receivers in a 112-Gbit/s 16-ary quadrature amplitude modulation (16-QAM) system over a 1440-km standard single-mode fiber (SSMF). A joint overlap approach and bandwidth compensation filter (OLA-BC) architecture is presented to mitigate the edge effect caused by the Hilbert transform and the Gibbs phenomenon induced by the FIR filter, respectively. Moreover, the computational complexity of the OLA-BC based parallelized KK/WDU-KK receiver is also discussed. Parallelized KK/WDU-KK receivers based on the presented OLA-BC architecture can effectively mitigate the edge effect and the Gibbs phenomenon together with more than two orders of magnitude improvement in terms of bit-error-ratio (BER) compared with parallelized KK/WDU-KK receivers without OLA-BC receivers in back-to-back (B2B) case. Finally, we successfully transmit the 16-QAM signals over 960-km SSMF with a BER lower than 7% hard-decision forward error correction (HD-FEC) threshold (3.8 × 10-3) and 1440-km SSMF with a BER lower than 20% soft-decision FEC (SD-FEC) threshold (2 × 10-2).The measurement of distance plays an important role in many aspects of modern societies. In this paper, an absolute distance measurement method for arbitrary distance is proposed and demonstrated using mode-resolved spectral interferometry with a gain-switched dual comb. An accuracy of 12 µm, when compared to a He-Ne fringe counting laser interferometer, for a displacement up to 2.5 m is demonstrated by tuning the repetition frequency of the dual comb from 1.1 GHz to 1.4 GHz. The compact measurement system based on a gain-switched dual comb breaks the constraint of periodic ambiguity. The simplification and improvements are significant for further industrial applications.We propose a novel method to construct an optical see-through retinal-projection near-eye display using the Maxwellian view and a holographic method. To provide a dynamic full-color virtual image, a single phase-only spatial light modulator (SLM) was employed in conjunction with a multiplexing-encoding holographic method. Holographic virtual images can be directly projected onto the retina using an optical see-through eyepiece. The virtual image is sufficiently clear when the crystal lens can focus at different depths; the presented method can resolve convergence and accommodation conflict during the use of near-eye displays. IOX1 To verify the proposed method, a proof-of-concept prototype was developed to provide vivid virtual images alongside real-world ones.Induced circular dichroism (ICD) has been used to detect biomolecular conformations through the coupling between chiral molecules and achiral metal nanostructures with the localized surface plasmon (LSP). However, this ICD is always weak and cannot be dynamically adjusted. Here, we put dielectric and graphene nanostructures on a metal-substrate for restricting more light energies and obtaining dynamic adjustable performance. A composite nanostructure array composed of achiral silicon-nanorods on a metal-substrate and graphene-ribbons (ASMG) is theoretically investigated. Two strong ICD signals appear in the THz region. Near-field magnetic distributions of ASMG reveal that the two strong ICD signals are mainly due to the surface plasmon resonances (SPPs) on the metal-substrate and LSP in the graphene nanostructures, respectively. The ICD signals strongly depend on the geometric parameters of ASMG and are dynamically adjusted by just changing the Fermi levels of graphene-ribbons. In addition, left-handed ASMG and right-handed ASMG can be used to identify the chiral molecular solutions with different chiralities.
Read More: https://www.selleckchem.com/products/iox1.html