Notes

Exactly how to keep pellet mill die and also roller?<br>
The roller and also die are the using parts in a pellet equipment. To make use of and maintain them in best method can minimize the failing rate, boost the production, elevate the working performance, save time and labor. If there is any type of trouble in the roller as well as die, the forming rate as well as production would certainly decline.



Load the die with oil mix

Each time after utilizing, or when you want to change the die, bear in mind to feed oil mix (mixed sawdust and waste oil) to the pellet maker, eject all the biomass materials and load the die holes with oil combination.




The biomass products contains dampness, which would certainly increase the deterioration of the die, as well as trigger it harsh inside. The oil mix filled out the die doles will safeguard them from rusting or rust.



Replace the oil blend every half a year

If you have leaved the pellet mill die aside for over a fifty percent year. You require to replace the oil blend in the crave brand-new, or they would set and also block the holes. This will influence the use for next time.



Solve the block of the pellet mill die

If the die holes are obstructed and also the wood pellets do not come out, we can make use of oil saturate or cooking to soften the raw materials, as well as make pellets once again. If this technique doesn't work, you can use drills to squeeze out the raw materials out, and feed oil materials and fine sand mix to grind the die.



Place the extra components in appropriate places

Preserve the pellet mill dies in ventilate as well as dry place. If maintained in Richi machine , they will rust conveniently. If you do not utilize it for very long time, you can layer it with a layer of waste oil to prevent deterioration of wetness airborne. Don't place the pellet mill die where the raw products are saved. The raw products are very easy to absorb wetness, which would accelerate the corrosion of the die.



Smooth the die and also chamfer the die orifices

The holes on the pellet mill die are processed by high-speed gun drill, which has high level of smoothness. Examine if there is any kind of bulges externally of the die, if so, smooth them with a flint glazing maker. If the die orifice are secured or have inversion, you should chamfer the die orifices as well as refurbish it.



Readjust the clearance in between the roller and also die

In flat die pellet maker, the suitable clearance in between roller and die is 0.1-0.3 mm. If the clearance is too little, the abrasion between the roller and also die will increase. If goat feed making machine is too large, the raw products layer will certainly be thick and the production will decrease. In ring die pellet machine, the appropriate clearance is 0.1-0.4 mm.



Keep the pellet mill die as well as roller clean

When the timber pellets have helped one month, you require to clean up the roller and die with diesel or gas. Coat them with lube oil and also mount them once again. To guarantee steady high manufacturing, we must keep the inside of the die clean.



If the ash is connected to the roller or the lubricating oil is insufficient, the rollers would certainly revolve unsteadily, and the production speed will certainly be influenced. Users need to examine the working condition of rollers frequently.



Preheat the pellet maker

Whenever prior to making wood pellets, feed the oil blend repetitively up until the temperature within is up to 50 ℃. Then you can feed the biomass products to make pellets.



In winter months, as the weather is cool, the die is sickly, we should preheat the device for longer time, to ensure that the pellet device can work much better, the manufacturing is greater, and also the life span is longer.



Guarantees basic materials top quality

Throughout the working of timber pellet maker, you need to guarantee there is no rocks or irons in the raw materials, in case they create damage to the die.




The dampness content in the raw materials must be 10%-18%. Dry product are hard to mold and mildew, which will heighten the abrasion of the pellet maker. If the raw materials are too moist, the dampness would vaporize and mix with the timber powders, and obstruct the holes on die.


Here's my website: https://richimachinery.wixsite.com/mysite/post/biomass-fule-pellet-maker-transforms-waste-timber-into-cash-money