Notes

When is Braille Signage Required?
It is merely natural also to need for many people to never know when Braille signage is necessary. Often, you'll have little if any experience on the subject but this will give you no protection from the authorities unless you comply with the laws. If you are unsure where to locate the knowledge, it could be perfectly located at the Building Code of Australia (BCA), Section D3.6. In this article, we're going to turn to offer a brief synopsis of what is necessary and where Braille signage must be placed.

braille exit signs for the disabled or blind will likely be unisex which must be identified with all the internationally recognised symbols of access for male, female or unisex. The signage must also display which side the access is usually to the WC pan by the symbols LH or RH (right of left hand side). The minimum size because of this script should be 20mm and should be inside the font San Serif.

Where Braille and Tactile Signs Should be Located

There are a few quite strict rules and stipulations regarding where signage must be located. Naturally, this would be to help a blind or partially sighted person to find the signage. The rules claim that it needs to be "not than 1200mm rather than greater than 1600mm higher than the floor or ground surface" and signs with single lines of characters needs to be between 1250mm and 1350mm higher than the floor. Where facilities are concerned, the signage should be for the latch side from the door and between 50mm and 300mm in the architrave. Signs for paths of travel must be located directly in front with the direction of travel. All signs needs to have a depth of 3mm.

Who is responsible?

Ultimately, it's the owner from the company's responsibility to make sure that the right signage is in place along with the correct locations. The penalties can be very severe for non-compliance so it is always cognizant of keep current with each of the rules. Never go cheap through the use of inferior quality products as with some cases these will not abide by regulations. Checks are carried out by the authorities over a frequent basis so it is essential that you are up-to-date with the newest regulations. A professional signage company that specialises in Braille and tactile signage will likely be able to assist and help you on which you will need.

If you've conducted any degree of research about them, you'll have already realised there are numerous firms that manufacture Braille signage. Sadly, as this really is an increasing industry you'll find several firms that offer sub-standard signage and also inaccurate advice. It is always advisable to utilize service of a company that has been in the commercial for numerous years and specifically what is essential. This can basically be valuable in the longer term and could potentially help you save thousands of dollars.
Website: https://www.brailleoptions.com.au/