Notes

Automobile lights routine upkeep and maintenance
How to maintain the car lights

1 Examine the airtightness of the headlight

If water vapor attacks the headlight, the service life of the bulb might be lowered. Therefore, the sealing qualities of the headlight need to be checked. If the seal ring in the middle of the distribution mirror and the reflector are found to be harmed, it needs to be gotten rid of and replaced immediately.

2 Tidy the reflector

The reflector of the semi-enclosed headlight is blackened and must be gotten rid of and replaced when the chromaticity is reduced. If there is just dust and stain on the reflector, it can be blown clean with air compression instead of taking apart and changing. For Honda car lights that can not be blown tidy, if the reflector's plating raw material is stainless-steel, because of its high durability, can use a thin fabric dipped in anhydrous ethanol (composition of more than 95%) from the reflector's interior to the outside world to carefully scrub in a spiral.
If the reflector plating is gold-plated, aluminum-plated film, because of its poor strength, only the neat cotton wool is dipped in boiling water to clean up, not scrubbed to prevent damage to the reflector coating.

Some mirrors are covered with a thin, totally transparent protective film, so care must be taken not to harm it when cleansing. If the reflector becomes filthy frequently, the sealing silicone ring will be damaged and should be eliminated and replaced. After scrubbing or cleaning the reflector, try to dry it before putting it together once again, and take notice of whether the setup area is appropriate.

3 Clean the bulb

The halogen bulb above the dust and stains can be cleaned with alcohol-soaked (90%) cotton. Take note not to clean in the light quickly snuffed out, and the bulb still has recurring heat recovery condition. After cleaning, it needs to be drying rather than cleaning, do not have to force or towel touch the bulb, does not need to switch on the switching power instantly, or there will be no appeal or can not be fixed.

4 change the direct light orientation

In the entire procedure of car travel, the direct light orientation will be moved because of the vibration of the vehicle body, so the yearly audit should be carried out on the headlights direct orientation of the unique check. During the scheduled upkeep duration, professional technicians will likely need to examine and adjust the direct beam orientation routinely.

5 After cleaning up the engine compartment, the water must be wiped dry

After cleaning the engine compartment, open the engine cover to dry. Keep in mind to wait until the engine compartment dries in the use of automobiles. Otherwise, the residual water in the engine compartment will become water vapor. It is easy to go into the headlights, resulting in the lights can not being utilized usually.

6 regular replacement of light bulbs

If you find that the lights are not bright enough, you need to change the lights in time and do an outstanding job of replacing both sides concurrently to keep the brightness uniform and ensure driving safety.
My Website: https://www.lkx1688.com/car-accessories/japanese-car/honda/