Notes

When is Braille Signage Required?
It is only natural also to be likely for most of us not to know when Braille signage is needed. Often, you will possess no experience about the subject but this will provide you with no protection through the authorities if you don't adhere to the laws. If custom braille signs are unsure where to locate the data, it is usually found in the Building Code of Australia (BCA), Section D3.6. In this article, we're going to turn to give a brief synopsis of what is necessary and where Braille signage should be placed.

Sanitary Facilities

Some sanitary facilities to the disabled or blind is going to be unisex and these ought to be identified with all the internationally recognised symbols of access for male, female or unisex. The signage should also display which side the access is to the WC pan with the symbols LH or RH (left or right hand side). The minimum size just for this script ought to be 20mm and ought to be in the font San Serif.

Where Braille and Tactile Signs Should be Located

There are some quite strict rules and stipulations regarding where signage ought to be located. Naturally, this would be to help a blind or partially sighted person to obtain the signage. The rules suggest that it ought to be "not than 1200mm instead of higher than 1600mm above the floor or ground surface" and signs with single lines of characters needs to be between 1250mm and 1350mm higher than the floor. Where facilities are involved, the signage ought to be on the latch side with the door and between 50mm and 300mm from your architrave. Signs for paths of travel ought to be located directly in front with the direction of travel. All signs really should have a depth of 3mm.

Who is responsible?

Ultimately, oahu is the owner from the company's responsibility to ensure the proper signage is within place and in the right locations. The penalties is often rather severe for non-compliance so it is always cognizant of keep current with all the rules. Never scrimp by making use of inferior quality products like certain instances these will not comply with regulations. Checks are performed by the authorities with a frequent basis so it's crucial that you are current with the most recent regulations. A professional signage company that specialises in Braille and tactile signage will be able to assist and help you on what you will want.

If you might have conducted any level of research about the subject, you will have already realised there are several companies that manufacture Braille signage. Sadly, as this really is a growing industry there are many firms that offer sub-standard signage along with inaccurate advice. It is always better to make use of the service of an company which has been in the commercial for several years and specifically what is required. This can only be valuable in the longer term and could potentially save lots of money.
Homepage: https://www.brailleoptions.com.au/