Notes

How to preserve pellet mill die as well as roller?<br>
The roller and die are the putting on components in a pellet device. To make use of and also preserve them in appropriate method can decrease the failure price, enhance the production, elevate the working efficiency, save time and also labor. If there is any kind of issue in the roller as well as die, the forming price and production would decrease.



Fill up the die with oil mixture

Every single time after using, or when you intend to change the die, keep in mind to feed oil blend (mixed sawdust and also waste oil) to the pellet machine, eject all the biomass materials as well as fill the die holes with oil blend.



The biomass materials has dampness, which would certainly speed up the rust of the die, and create it harsh inside. The oil mix filled in the die doles will certainly secure them from rusting or rust.




Replace the oil mix every half a year

If you have leaved the pellet mill die apart for over a fifty percent year. You need to replace the oil blend in the need brand-new, or they would set as well as block the holes. This will certainly influence the usage for next time.



Address the block of the pellet mill die

If the die openings are obstructed and also the timber pellets don't appear, we can utilize oil soak or preparing to soften the raw products, and make pellets again. If this approach does not function, you can make use of drills to extrude the raw products out, and feed oil products as well as fine sand combination to grind the die.



Place the spare parts in ideal locations

Protect the pellet mill dies in ventilate and also completely dry location. If protected in wet place, they will certainly rust conveniently. If small pellet machine price do not use it for long time, you can layer it with a layer of waste oil to avoid deterioration of wetness in the air. Do not place the pellet mill die where the raw products are saved. The raw materials are very easy to absorb moistures, which would accelerate the deterioration of the die.



Smooth the die as well as chamfer the die orifices

The holes on the pellet mill die are refined by high-speed weapon drill, which has high smoothness. Inspect if there is any bulges on the surface of the die, if so, smooth them with a flint glazing machine. If the die orifice are secured or have inversion, you should chamfer the die orifices as well as restore it.



Adjust the clearance between the roller as well as die

In flat die pellet machine, the appropriate clearance between roller and die is 0.1-0.3 mm. If https://machineryindustry.quora.com/Fowl-feed-handling-device-selection-principle-There-are-principles-in-the-option-of-complete-collections-of-fowl-feed-p is as well tiny, the abrasion between the roller and also die will certainly increase. If the clearance is also big, the raw materials layer will certainly be thick and also the production will certainly decrease. In ring die pellet machine, the suitable clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller clean

When the timber pellets have worked for 1 month, you need to clean up the roller and die with diesel or gas. Cover them with lube oil and also mount them once more. To make sure stable high manufacturing, we ought to keep the within the die tidy.



If the ash is attached to the roller or the lubricating oil is insufficient, the rollers would certainly turn unsteadily, as well as the production rate will be affected. Customers must check the functioning condition of rollers consistently.



Preheat the pellet machine

Every time prior to making timber pellets, feed the oil mixture continuously up until the temperature level within is up to 50 ℃. After that you can feed the biomass materials to make pellets.



In winter, as the weather is chilly, the die is sickly, we must preheat the equipment for longer time, so that the pellet maker can work better, the production is higher, and also the service life is longer.



Makes sure raw materials top quality


During the working of timber pellet machine, you ought to ensure there is no rocks or irons in the raw products, in case they create damages to the die.



The moisture material in the raw products must be 10%-18%. Dry product are tough to mold and mildew, which will certainly increase the abrasion of the pellet equipment. If the raw products are too damp, the dampness would evaporate and mix with the wood powders, and also block the holes on die.


Website: https://www.123articleonline.com/articles/1312629/using-industrial-wood-pellet-mill