Notes

How to preserve pellet mill die and also roller?<br>
The roller as well as die are the wearing parts in a pellet device. To utilize and also maintain them in right method can decrease the failure rate, improve the manufacturing, elevate the working efficiency, conserve time and also labor. If there is any kind of problem in the roller as well as die, the developing price and also manufacturing would decline.



Fill the die with oil mixture

Each time after utilizing, or when you want to replace the die, remember to feed oil combination (combined sawdust and also waste oil) to the pellet equipment, squeeze out all the biomass products and also fill the die openings with oil mixture.



The biomass products contains moisture, which would increase the rust of the die, as well as trigger it rough inside. The oil mixture filled out the die doles will safeguard them from rusting or deterioration.



Replace the oil mix every half a year

If you have actually leaved the pellet mill die aside for over a half year. You need to change the oil combination in the need brand-new, or they would set and also obstruct the holes. This will influence the use for following time.



Address the block of the pellet mill die

If the die holes are blocked and also the wood pellets don't appear, we can make use of oil saturate or cooking to soften the raw materials, and also make pellets once again. If this approach doesn't function, you can utilize drills to squeeze out the raw materials out, and also feed oil materials and great sand combination to grind the die.



Place the spare components in appropriate locations

Protect the pellet mill dies in ventilate and dry place. If preserved in pellet press machine , they will wear away quickly. If you don't use it for very long time, you can layer it with a layer of waste oil to prevent deterioration of moisture airborne. Do not put the pellet mill die where the raw products are saved. The raw products are easy to absorb wetness, which would speed up the corrosion of the die.




Smooth the die and chamfer the die orifices


The holes on the pellet mill die are refined by high-speed gun drill, which has high level of smoothness. dry ice pellet maker for sale if there is any type of protrudes externally of the die, if so, smooth them with a flint glazing device. If the die orifice are secured or have inversion, you need to chamfer the die orifices as well as refurbish it.



Change the clearance between the roller and also die

In level die pellet machine, the ideal clearance between roller and also die is 0.1-0.3 mm. If the clearance is as well small, the abrasion between the roller as well as die will certainly heighten. If the clearance is too big, the raw materials layer will certainly be thick as well as the manufacturing will decline. In ring die pellet device, the appropriate clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller clean

When the wood pellets have helped 30 days, you need to clean up the roller as well as die with diesel or gasoline. Coat them with lubricant oil and mount them once more. To ensure constant high production, we ought to maintain the inside of the die tidy.



If the ash is affixed to the roller or the lubricating oil is insufficient, the rollers would revolve unsteadily, and the manufacturing rate will be impacted. Individuals need to inspect the working condition of rollers frequently.



Pre-heat the pellet maker

Every time prior to making wood pellets, feed the oil mixture consistently up until the temperature level within depends on 50 ℃. Then you can feed the biomass products to make pellets.



In winter months, as the weather is chilly, the die is sickly, we need to preheat the maker for longer time, to ensure that the pellet equipment can function better, the production is greater, and the service life is much longer.



Makes certain resources top quality

Throughout the working of timber pellet device, you should ensure there is no rocks or irons in the raw products, in case they trigger damage to the die.



The wetness material in the raw materials must be 10%-18%. Dry material are tough to mold and mildew, which will escalate the abrasion of the pellet machine. If the raw materials are also wet, the dampness would vaporize and also combine with the wood powders, and block the holes on die.


Read More: https://sites.google.com/view/richimachine/faq-from-consumers-that-get-timber-pelletizer-maker