Notes

Just how to preserve pellet mill die and roller?<br>
The roller as well as die are the using components in a pellet maker. To utilize and maintain them in ideal way can decrease the failure price, enhance the manufacturing, elevate the functioning performance, conserve time and labor. If there is any type of problem in the roller and also die, the forming price as well as production would decrease.



Fill up the die with oil combination

Every single time after using, or when you want to replace the die, remember to feed oil mixture (mixed sawdust as well as waste oil) to the pellet machine, squeeze out all the biomass products and also fill the die holes with oil blend.



The biomass materials has dampness, which would speed up the rust of the die, and also create it harsh inside. The oil combination filled out the die doles will protect them from rusting or corrosion.



Replace the oil mix every half a year

If you have actually leaved the pellet mill die apart for over a half year. You require to change the oil mix in the need new, or they would solidify as well as obstruct the holes. This will affect the usage for following time.



Solve the block of the pellet mill die

If the die openings are obstructed and also the timber pellets don't appear, we can use oil saturate or cooking to soften the raw materials, and also make pellets once again. If this method does not work, you can make use of drills to extrude the raw materials out, as well as feed oil materials as well as fine sand combination to grind the die.



Area the extra parts in ideal areas

Protect the pellet mill dies in ventilate and also completely dry area. If maintained in moist place, they will corrode easily. If you don't utilize it for long period of time, you can coat it with a layer of waste oil to avoid deterioration of dampness airborne. Do not put the pellet mill die where the raw materials are stored. Richi machinery are easy to take in dampness, which would accelerate the corrosion of the die.



Smooth the die as well as chamfer the die orifices

The holes on the pellet mill die are refined by high-speed weapon drill, which has high level of smoothness. Check if there is any kind of bulges externally of the die, if so, smooth them with a flint glazing maker. If the die orifice are sealed or have inversion, you need to chamfer the die orifices as well as refurbish it.




Readjust the clearance in between the roller and die

In level die pellet device, the ideal clearance between roller and also die is 0.1-0.3 mm. If the clearance is as well tiny, the abrasion in between the roller as well as die will certainly heighten. If the clearance is also big, the raw materials layer will be thick and also the production will decline. In ring die pellet maker, the appropriate clearance is 0.1-0.4 mm.



Maintain the pellet mill die and also roller clean


When the wood pellets have worked for thirty days, you need to tidy up the roller and die with diesel or gasoline. Cover them with lubricant oil as well as mount them once more. To ensure constant high production, we must keep the inside of the die clean.



If the ash is affixed to the roller or the lubricating oil wants, the rollers would turn unsteadily, and the production speed will certainly be affected. Users ought to check the working problem of rollers routinely.



Preheat the pellet machine

Whenever before making timber pellets, feed the oil mix consistently up until the temperature level within is up to 50 ℃. After that you can feed the biomass products to make pellets.



In winter months, as the weather is chilly, the die is frail, we ought to preheat the equipment for longer time, to make sure that the pellet machine can work better, the production is greater, and the life span is longer.



Guarantees raw materials high quality

Throughout the working of timber pellet machine, you ought to ensure there is no stones or irons in the raw materials, in case they trigger damage to the die.



The moisture content in the raw materials need to be 10%-18%. hemp pellet machine are hard to mold and mildew, which will increase the abrasion of the pellet machine. If the raw products are as well damp, the dampness would evaporate and also blend with the timber powders, as well as obstruct the holes on die.


Here's my website: https://railtransholding.com/poultry-feed-pellet-making-machine/