Notes

How to keep pellet mill die and roller?<br>
The roller and die are the wearing parts in a pellet machine. To make use of and keep them in appropriate way can reduce the failing price, enhance the manufacturing, raise the working effectiveness, save time as well as labor. If there is any type of problem in the roller and also die, the developing rate as well as production would decline.



Fill up the die with oil combination

Every single time after using, or when you wish to replace the die, bear in mind to feed oil combination (blended sawdust and also waste oil) to the pellet equipment, squeeze out all the biomass products and fill up the die openings with oil combination.



The biomass products consists of moisture, which would speed up the rust of the die, and create it harsh inside. The oil mix filled out the die doles will certainly secure them from rusting or deterioration.



Replace the oil combination every half a year

If you have actually leaved the pellet mill die aside for over a fifty percent year. You need to change the oil blend in the crave brand-new, or they would certainly solidify and also obstruct the holes. This will certainly impact the use for following time.



Solve the block of the pellet mill die


If the die holes are blocked and the timber pellets do not come out, we can make use of oil soak or preparing to soften the raw products, and also make pellets once more. If this approach doesn't work, you can utilize drills to extrude the raw materials out, and also feed oil products and also great sand blend to grind the die.



Place the spare parts in right locations

Protect the pellet mill dies in ventilate as well as dry place. If maintained in damp place, they will certainly rust conveniently. If you do not use it for long time, you can coat it with a layer of waste oil to prevent corrosion of dampness in the air. Do not place the pellet mill die where the raw materials are stored. chicken feed making machine price are very easy to soak up dampness, which would certainly increase the corrosion of the die.



Smooth the die as well as chamfer the die orifices

The holes on the pellet mill die are refined by high-speed gun drill, which has high smoothness. Examine if there is any kind of protrudes on the surface of the die, if so, smooth them with a flint glazing maker. If the die orifice are secured or have inversion, you should chamfer the die orifices and remodel it.



Readjust the clearance in between the roller as well as die

In flat die pellet device, the ideal clearance between roller and die is 0.1-0.3 mm. If the clearance is also little, the abrasion in between the roller as well as die will certainly increase. If the clearance is also big, the raw materials layer will be thick and the production will certainly decrease. In ring die pellet equipment, the appropriate clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller tidy

When the timber pellets have benefited one month, you require to tidy up the roller and die with diesel or gas. Coat them with lube oil as well as install them again. To make sure steady high manufacturing, we must keep the inside of the die tidy.



If the ash is connected to the roller or the lubricating oil is insufficient, the rollers would rotate unsteadily, as well as the manufacturing rate will be affected. Customers must check the functioning problem of rollers regularly.




Preheat the pellet maker

Every time prior to making wood pellets, feed the oil mixture consistently until the temperature inside is up to 50 ℃. Then you can feed the biomass products to make pellets.



In winter season, as the climate is chilly, the die is frail, we should pre-heat the device for longer time, to ensure that the pellet machine can function better, the production is greater, as well as the life span is much longer.



Guarantees basic materials high quality

During the working of wood pellet machine, you must make sure there is no stones or irons in the raw products, in case they create damage to the die.



The dampness web content in the raw products need to be 10%-18%. Dry material are difficult to mold, which will escalate the abrasion of the pellet equipment. If the raw products are as well moist, the moisture would vaporize as well as blend with the wood powders, and also obstruct the holes on die.


Website: https://linpvr.org/