Notes

Just how to preserve pellet mill die as well as roller?<br>
The roller and also die are the wearing components in a pellet equipment. To make use of and maintain them in right means can reduce the failure rate, enhance the production, elevate the working efficiency, conserve time and labor. If there is any type of issue in the roller and also die, the creating price and also manufacturing would decrease.



Load the die with oil blend

Every time after using, or when you intend to replace the die, bear in mind to feed oil blend (blended sawdust and also waste oil) to the pellet machine, eject all the biomass products as well as fill the die openings with oil blend.



The biomass materials includes wetness, which would increase the deterioration of the die, and trigger it harsh inside. wood pellet machine filled in the die doles will certainly safeguard them from rusting or rust.



Change the oil mix every half a year

If you have actually leaved the pellet mill die aside for over a half year. You require to change the oil blend in the crave new, or they would solidify as well as obstruct the holes. This will certainly affect the use for following time.




Fix the block of the pellet mill die

If the die openings are obstructed and the wood pellets do not appear, we can use oil saturate or preparing to soften the raw products, as well as make pellets once again. If this technique doesn't work, you can utilize drills to squeeze out the raw materials out, as well as feed oil products and fine sand combination to grind the die.



Area the spare parts in ideal locations

Maintain the pellet mill dies in ventilate and also dry location. If preserved in wet place, they will corrode conveniently. If you don't use it for long period of time, you can layer it with a layer of waste oil to prevent rust of wetness airborne. Don't place the pellet mill die where the raw materials are saved. The raw materials are easy to soak up dampness, which would accelerate the corrosion of the die.



Smooth the die and also chamfer the die orifices

The holes on the pellet mill die are processed by high-speed weapon drill, which has high level of smoothness. Check if there is any type of bulges externally of the die, if so, smooth them with a flint glazing maker. If the die orifice are secured or have inversion, you ought to chamfer the die orifices and also restore it.



Change the clearance between the roller and die

In flat die pellet maker, the appropriate clearance in between roller as well as die is 0.1-0.3 mm. If the clearance is also small, the abrasion between the roller and die will escalate. If the clearance is also huge, the raw materials layer will certainly be thick as well as the manufacturing will certainly decline. In ring die pellet machine, the suitable clearance is 0.1-0.4 mm.



Maintain the pellet mill die and also roller tidy

When the timber pellets have worked for thirty day, you require to clean up the roller as well as die with diesel or gas. Coat them with lube oil as well as mount them once again. To ensure steady high manufacturing, we must keep the inside of the die tidy.



If the ash is attached to the roller or the lubricating oil wants, the rollers would certainly turn unsteadily, and the production rate will certainly be impacted. Richi machine must inspect the working problem of rollers frequently.



Preheat the pellet equipment

Every time before making timber pellets, feed the oil combination consistently up until the temperature inside is up to 50 ℃. Then you can feed the biomass products to make pellets.



In winter months, as the weather condition is cold, the die is frail, we need to preheat the equipment for longer time, so that the pellet equipment can function much better, the production is greater, and also the service life is longer.




Guarantees resources top quality

During the working of wood pellet device, you need to ensure there is no stones or irons in the raw materials, in case they trigger damages to the die.



The moisture material in the raw products need to be 10%-18%. Dry product are difficult to mold and mildew, which will certainly increase the abrasion of the pellet machine. If the raw materials are too moist, the dampness would certainly vaporize as well as mix with the wood powders, and block the holes on die.


Website: https://corridadascores.com/