Notes

How to preserve pellet mill die and roller?<br>
The roller and die are the putting on parts in a pellet machine. To utilize and also preserve them in ideal means can reduce the failing rate, enhance the manufacturing, elevate the functioning performance, conserve time and also labor. If there is any trouble in the roller as well as die, the developing rate and also manufacturing would certainly decrease.



Fill the die with oil mixture


Whenever after utilizing, or when you intend to change the die, keep in mind to feed oil mix (blended sawdust and also waste oil) to the pellet machine, squeeze out all the biomass materials and load the die holes with oil mix.



The biomass products has wetness, which would increase the corrosion of the die, and also trigger it harsh inside. The oil mixture filled out the die doles will certainly secure them from rusting or deterioration.



Change the oil mix every half a year

If you have leaved the pellet mill die apart for over a half year. You need to change the oil blend in the need new, or they would certainly solidify as well as obstruct the holes. diy pellet maker will certainly impact the use for following time.




Address the block of the pellet mill die

If the die holes are blocked and also the timber pellets don't appear, we can make use of oil saturate or cooking to soften the raw materials, as well as make pellets again. If this technique does not work, you can make use of drills to extrude the raw products out, and also feed oil materials as well as great sand mixture to grind the die.



Location the extra parts in right places

Preserve the pellet mill dies in ventilate and also dry area. If preserved in moist location, they will certainly rust quickly. If you don't use it for long period of time, you can coat it with a layer of waste oil to avoid corrosion of wetness airborne. small wood pellet mill for sale put the pellet mill die where the raw materials are kept. The raw materials are simple to absorb dampness, which would certainly increase the deterioration of the die.



Smooth the die and also chamfer the die orifices

The holes on the pellet mill die are refined by high-speed weapon drill, which has high smoothness. Check if there is any type of protrudes on the surface of the die, if so, smooth them with a flint glazing maker. If the die orifice are sealed or have inversion, you ought to chamfer the die orifices and also remodel it.



Readjust the clearance between the roller as well as die

In level die pellet maker, the appropriate clearance in between roller as well as die is 0.1-0.3 mm. If the clearance is as well small, the abrasion in between the roller as well as die will certainly intensify. If the clearance is too large, the raw products layer will be thick and the manufacturing will decrease. In ring die pellet equipment, the ideal clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller tidy

When the timber pellets have actually benefited 30 days, you require to tidy up the roller and die with diesel or fuel. Coat them with lubricant oil and install them again. To guarantee stable high manufacturing, we should maintain the within the die clean.



If the ash is affixed to the roller or the lubricating oil wants, the rollers would rotate unsteadily, as well as the manufacturing rate will certainly be affected. Individuals must examine the functioning problem of rollers frequently.



Pre-heat the pellet equipment

Every single time prior to making timber pellets, feed the oil mixture consistently till the temperature inside is up to 50 ℃. Then rabbit feed pellet making machine can feed the biomass materials to make pellets.



In wintertime, as the climate is cold, the die is frail, we must pre-heat the machine for longer time, so that the pellet machine can work better, the manufacturing is greater, and also the life span is longer.



Makes sure resources top quality

Throughout the working of wood pellet equipment, you need to ensure there is no rocks or irons in the raw products, in case they cause damages to the die.



The wetness material in the raw materials ought to be 10%-18%. Dry material are difficult to mold and mildew, which will heighten the abrasion of the pellet machine. If the raw products are too damp, the moisture would certainly vaporize and combine with the wood powders, as well as obstruct the holes on die.


My Website: https://boeboer.com/fish-feed-pellet-extruder/