Notes

Just how to keep pellet mill die as well as roller?<br>
The roller and also die are the putting on parts in a pellet device. To make use of as well as maintain them in appropriate means can minimize the failure price, enhance the production, raise the functioning efficiency, save time as well as labor. If there is any problem in the roller and die, the creating price and also manufacturing would decline.



Fill the die with oil mixture

Every time after using, or when you wish to replace the die, bear in mind to feed oil mix (mixed sawdust and waste oil) to the pellet maker, squeeze out all the biomass materials and also fill the die holes with oil mix.



The biomass materials consists of moisture, which would accelerate the deterioration of the die, and cause it rough inside. The oil combination completed the die doles will protect them from rusting or deterioration.



Replace the oil combination every half a year

If you have leaved the pellet mill die apart for over a half year. You need to change the oil blend in the crave brand-new, or they would certainly harden and block the holes. floating feed machine for next time.



Resolve the block of the pellet mill die

If the die openings are obstructed and the timber pellets do not come out, we can utilize oil saturate or preparing to soften the raw materials, and also make pellets once more. If this approach does not function, you can use drills to squeeze out the raw materials out, and also feed oil products and fine sand mixture to grind the die.



Location the extra components in appropriate areas

Protect the pellet mill dies in ventilate and dry area. If maintained in wet area, they will wear away quickly. If you do not utilize it for long period of time, you can layer it with a layer of waste oil to stop corrosion of dampness airborne. Do not put the pellet mill die where the raw materials are kept. The raw materials are very easy to take in dampness, which would certainly accelerate the deterioration of the die.



Smooth the die and chamfer the die orifices

The holes on the pellet mill die are processed by high-speed gun drill, which has high level of smoothness. Check if there is any kind of bulges on the surface of the die, if so, smooth them with a flint glazing maker. If the die orifice are sealed or have inversion, you ought to chamfer the die orifices and also renovate it.



Change the clearance in between the roller as well as die

In flat die pellet maker, the suitable clearance in between roller and also die is 0.1-0.3 mm. If the clearance is too small, the abrasion between the roller and also die will certainly magnify. If the clearance is too huge, the raw products layer will be thick and also the production will decline. In ring die pellet equipment, the ideal clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller tidy

When the wood pellets have actually benefited thirty days, you require to tidy up the roller as well as die with diesel or gas. Coat them with lubricating substance oil as well as mount them once again. To guarantee stable high production, we must keep the within the die tidy.



If the ash is attached to the roller or the lubricating oil is insufficient, the rollers would certainly revolve unsteadily, and also the manufacturing speed will certainly be affected. Users should inspect the functioning problem of rollers regularly.



Preheat the pellet equipment

Every single time before making wood pellets, feed the oil combination consistently up until the temperature within is up to 50 ℃. After that you can feed the biomass products to make pellets.



In winter months, as the climate is chilly, the die is sickly, we should preheat the machine for longer time, to make sure that the pellet machine can work much better, the production is higher, as well as the service life is longer.



Makes sure resources quality

During the working of wood pellet machine, you need to make sure there is no stones or irons in the raw materials, in case they create damages to the die.




The wetness content in the raw products should be 10%-18%. richi pellet mill are tough to mold and mildew, which will increase the abrasion of the pellet maker. If the raw materials are also damp, the moisture would certainly evaporate and also mix with the wood powders, and also obstruct the holes on die.



Read More: https://www.blablaface.net/