Notes

Exactly how to keep pellet mill die and roller?<br>
ecostan pellet machine as well as die are the putting on components in a pellet device. To use as well as keep them in appropriate means can reduce the failing price, boost the manufacturing, elevate the functioning performance, conserve time and also labor. If there is any kind of trouble in the roller and die, the forming rate as well as manufacturing would decrease.



Load the die with oil mix

Each time after making use of, or when you want to replace the die, remember to feed oil mixture (blended sawdust as well as waste oil) to the pellet maker, squeeze out all the biomass products and fill the die holes with oil blend.



The biomass products has moisture, which would speed up the deterioration of the die, as well as trigger it harsh inside. The oil blend filled out the die doles will secure them from rusting or corrosion.




Change the oil blend every half a year

If you have leaved the pellet mill die aside for over a fifty percent year. You require to replace the oil mixture in the die for new, or they would harden and also block the holes. This will certainly affect the use for following time.



Address the block of the pellet mill die

If the die openings are blocked as well as the timber pellets don't appear, we can use oil saturate or cooking to soften the raw materials, and make pellets once more. If this method does not function, you can make use of drills to squeeze out the raw products out, as well as feed oil materials and great sand mix to grind the die.



Area the spare components in best locations


Protect the pellet mill dies in ventilate and dry location. If protected in moist area, they will certainly rust quickly. If you do not utilize it for long time, you can layer it with a layer of waste oil to prevent rust of dampness airborne. Don't place the pellet mill die where the raw materials are saved. livestock feed pellet machine are simple to soak up dampness, which would certainly accelerate the corrosion of the die.



Smooth the die and chamfer the die orifices

The holes on the pellet mill die are refined by high-speed weapon drill, which has high smoothness. Check if there is any kind of protrudes externally of the die, if so, smooth them with a flint glazing machine. If the die orifice are secured or have inversion, you need to chamfer the die orifices as well as renovate it.



Adjust the clearance in between the roller and also die

In flat die pellet machine, the appropriate clearance between roller and also die is 0.1-0.3 mm. If the clearance is as well little, the abrasion in between the roller and also die will certainly heighten. If the clearance is as well big, the raw products layer will certainly be thick as well as the manufacturing will decrease. In ring die pellet device, the appropriate clearance is 0.1-0.4 mm.



Keep the pellet mill die and roller tidy

When the timber pellets have worked for 30 days, you need to clean up the roller as well as die with diesel or gas. Coat them with lubricating substance oil as well as install them again. To make certain consistent high manufacturing, we should keep the inside of the die clean.



If the ash is affixed to the roller or the lubricating oil is insufficient, the rollers would certainly turn unsteadily, and the production speed will be impacted. Users should examine the functioning condition of rollers regularly.



Pre-heat the pellet equipment

Every single time before making timber pellets, feed the oil blend continuously up until the temperature within is up to 50 ℃. Then you can feed the biomass materials to make pellets.



In wintertime, as the weather condition is cold, the die is sickly, we must pre-heat the equipment for longer time, to ensure that the pellet maker can function much better, the manufacturing is higher, and also the service life is longer.



Guarantees raw materials top quality

During the working of wood pellet device, you need to ensure there is no stones or irons in the raw materials, in case they trigger damage to the die.



The wetness material in the raw materials ought to be 10%-18%. Dry product are tough to mold, which will increase the abrasion of the pellet maker. If the raw materials are too moist, the dampness would certainly vaporize and combine with the wood powders, and block the holes on die.


Website: https://railtransholding.com/biomass-pellet-mill-for-sale/