Notes

How to keep pellet mill die and also roller?<br>
The roller and also die are the using components in a pellet maker. To use and keep them in right means can lower the failing price, improve the manufacturing, elevate the working effectiveness, save time and also labor. If there is any kind of problem in the roller as well as die, the creating rate as well as manufacturing would decrease.



Fill up the die with oil combination

Whenever after utilizing, or when you want to change the die, bear in mind to feed oil combination (mixed sawdust as well as waste oil) to the pellet maker, eject all the biomass products as well as fill the die openings with oil mix.



The biomass materials contains wetness, which would certainly increase the deterioration of the die, as well as create it rough inside. small pellet making machine completed the die doles will secure them from rusting or rust.



Replace the oil mixture every half a year

If you have actually leaved the pellet mill die apart for over a fifty percent year. You require to replace the oil mix in the crave brand-new, or they would certainly harden as well as obstruct the holes. This will affect the use for next time.



Resolve the block of the pellet mill die

If the die holes are obstructed and also the wood pellets do not appear, we can utilize oil saturate or preparing to soften the raw products, and also make pellets once again. If this method doesn't work, you can utilize drills to extrude the raw products out, as well as feed oil materials and also great sand mixture to grind the die.



Area the extra components in right locations

Preserve the pellet mill dies in ventilate and also dry place. If maintained in wet place, they will rust easily. If you do not utilize it for long period of time, you can coat it with a layer of waste oil to stop rust of dampness in the air. Don't put the pellet mill die where the raw products are kept. The raw products are simple to soak up wetness, which would speed up the corrosion of the die.




Smooth the die and also chamfer the die orifices

The holes on the pellet mill die are refined by high-speed gun drill, which has high level of smoothness. Check if there is any type of protrudes on the surface of the die, if so, smooth them with a flint glazing device. If the die orifice are sealed or have inversion, you ought to chamfer the die orifices and restore it.



Readjust the clearance in between the roller and die

In level die pellet device, the appropriate clearance between roller as well as die is 0.1-0.3 mm. If the clearance is too small, the abrasion in between the roller as well as die will magnify. If the clearance is too big, the raw products layer will certainly be thick and the production will decline. In ring die pellet maker, the suitable clearance is 0.1-0.4 mm.



Maintain the pellet mill die and also roller clean

When the wood pellets have benefited thirty day, you need to tidy up the roller and also die with diesel or gas. Coat them with lubricating substance oil and install them once more. To make sure steady high manufacturing, we must keep the inside of the die tidy.



If the ash is connected to the roller or the lubricating oil is insufficient, the rollers would certainly rotate unsteadily, as well as the manufacturing speed will certainly be influenced. Individuals must examine the functioning problem of rollers frequently.



Pre-heat the pellet device

Each time before making wood pellets, feed the oil mixture consistently till the temperature level within is up to 50 ℃. Then wood pellet manufacturing machine can feed the biomass materials to make pellets.



In wintertime, as the weather condition is cool, the die is frail, we should pre-heat the machine for longer time, to ensure that the pellet device can function much better, the manufacturing is greater, and the life span is longer.



Ensures raw materials high quality

During the working of timber pellet machine, you should make certain there is no rocks or irons in the raw materials, in case they cause damage to the die.



The wetness content in the raw materials should be 10%-18%. Dry product are difficult to mold and mildew, which will certainly heighten the abrasion of the pellet device. If the raw materials are as well damp, the wetness would evaporate as well as mix with the wood powders, as well as obstruct the holes on die.



Homepage: https://boeboer.com/organic-fertilizer-pellet-mill/