Notes

How to preserve pellet mill die and also roller?<br>
The roller and die are the wearing components in a pellet device. To utilize floating fish feed pellet machine as keep them in ideal means can decrease the failing rate, improve the manufacturing, increase the functioning efficiency, save time and also labor. If there is any kind of problem in the roller and die, the creating price and also manufacturing would decline.



Fill up the die with oil mixture

Every single time after using, or when you intend to change the die, keep in mind to feed oil mix (combined sawdust as well as waste oil) to the pellet equipment, eject all the biomass materials as well as fill up the die openings with oil combination.



The biomass materials consists of wetness, which would increase the rust of the die, and cause it harsh inside. small pellet machine filled out the die doles will certainly secure them from rusting or corrosion.



Change the oil mix every half a year

If you have actually leaved the pellet mill die aside for over a half year. You need to change the oil combination in the crave brand-new, or they would set and also block the holes. This will certainly impact the use for next time.



Address the block of the pellet mill die

If the die openings are blocked and also the timber pellets don't come out, we can use oil saturate or cooking to soften the raw products, and make pellets again. If this method does not work, you can make use of drills to squeeze out the raw products out, and also feed oil products and also great sand blend to grind the die.



Location the extra parts in appropriate places

Maintain the pellet mill dies in ventilate as well as completely dry location. If maintained in wet place, they will wear away conveniently. If you don't utilize it for long period of time, you can coat it with a layer of waste oil to avoid rust of wetness airborne. Do not place the pellet mill die where the raw products are saved. The raw products are simple to soak up moistures, which would accelerate the deterioration of the die.



Smooth the die and also chamfer the die orifices

The holes on the pellet mill die are refined by high-speed weapon drill, which has high level of smoothness. Examine if there is any kind of protrudes externally of the die, if so, smooth them with a flint glazing equipment. If the die orifice are sealed or have inversion, you must chamfer the die orifices and also remodel it.



Readjust the clearance in between the roller and also die

In flat die pellet device, the suitable clearance between roller and also die is 0.1-0.3 mm. If the clearance is also tiny, the abrasion between the roller and die will certainly intensify. If the clearance is too huge, the raw products layer will be thick as well as the manufacturing will decline. In ring die pellet machine, the appropriate clearance is 0.1-0.4 mm.



Maintain the pellet mill die as well as roller clean

When the wood pellets have actually worked for 1 month, you need to clean up the roller and also die with diesel or gasoline. Cover richi pellet mill with lube oil and also mount them once again. To make certain constant high manufacturing, we ought to maintain the within the die clean.



If the ash is connected to the roller or the lubricating oil is insufficient, the rollers would certainly turn unsteadily, and also the manufacturing rate will certainly be impacted. Customers ought to examine the working problem of rollers regularly.



Pre-heat the pellet maker

Every single time prior to making timber pellets, feed the oil combination repetitively until the temperature level inside depends on 50 ℃. After that you can feed the biomass materials to make pellets.



In winter season, as the climate is chilly, the die is sickly, we need to preheat the equipment for longer time, so that the pellet machine can work much better, the manufacturing is greater, and also the life span is longer.



Ensures basic materials top quality


Throughout the working of timber pellet device, you need to make sure there is no rocks or irons in the raw materials, in case they cause damage to the die.




The wetness material in the raw products should be 10%-18%. Dry material are difficult to mold, which will certainly heighten the abrasion of the pellet machine. If the raw materials are too wet, the dampness would certainly vaporize and also mix with the wood powders, and obstruct the holes on die.


Website: https://boeboer.com/fish-feed-pellet-extruder/