Notes

Exactly how to keep pellet mill die as well as roller?<br>
The roller as well as die are the wearing parts in a pellet maker. To utilize and also preserve them in best means can minimize the failure price, improve the manufacturing, increase the working efficiency, conserve time and also labor. If there is any kind of issue in the roller as well as die, the creating price and manufacturing would decrease.



Fill up the die with oil mixture

Every single time after making use of, or when you wish to change the die, keep in mind to feed oil blend (blended sawdust as well as waste oil) to the pellet equipment, eject all the biomass materials and load the die openings with oil blend.



The biomass materials includes dampness, which would certainly speed up the rust of the die, and cause it harsh inside. The oil mixture filled in the die doles will certainly secure them from rusting or rust.



Replace the oil mix every half a year

If you have leaved the pellet mill die apart for over a half year. You need to change the oil blend in the need new, or they would certainly set and obstruct the holes. This will affect the usage for next time.



Solve the block of the pellet mill die

If the die openings are obstructed as well as the wood pellets do not appear, we can use oil saturate or cooking to soften the raw materials, as well as make pellets again. If this method doesn't function, you can make use of drills to squeeze out the raw products out, and feed oil products and fine sand blend to grind the die.



Area the spare components in ideal areas

Protect the pellet mill dies in ventilate and also completely dry area. If maintained in damp place, they will certainly rust conveniently. If richi pellet don't use it for long time, you can layer it with a layer of waste oil to stop deterioration of dampness in the air. Do not put the pellet mill die where the raw materials are saved. The raw products are simple to take in wetness, which would certainly speed up the rust of the die.



Smooth the die as well as chamfer the die orifices

The holes on the pellet mill die are refined by high-speed gun drill, which has high smoothness. Check if there is richi pellet mill of bulges externally of the die, if so, smooth them with a flint glazing equipment. If the die orifice are sealed or have inversion, you must chamfer the die orifices and renovate it.



Readjust the clearance between the roller as well as die

In level die pellet machine, the appropriate clearance between roller and die is 0.1-0.3 mm. If the clearance is too little, the abrasion in between the roller as well as die will certainly magnify. If the clearance is too big, the raw materials layer will be thick as well as the manufacturing will decrease. In ring die pellet device, the suitable clearance is 0.1-0.4 mm.



Keep the pellet mill die and also roller clean

When the wood pellets have actually benefited 1 month, you require to clean up the roller and die with diesel or fuel. Coat them with lubricant oil and also install them again. To make sure stable high production, we should keep the within the die tidy.




If the ash is attached to the roller or the lubricating oil wants, the rollers would certainly turn unsteadily, and the production speed will certainly be affected. Users need to examine the working condition of rollers consistently.



Pre-heat the pellet device

Every time prior to making wood pellets, feed the oil mixture repeatedly until the temperature level within is up to 50 ℃. After that you can feed the biomass materials to make pellets.



In wintertime, as the weather condition is cool, the die is sickly, we ought to pre-heat the device for longer time, to make sure that the pellet equipment can work much better, the manufacturing is greater, and the life span is longer.



Makes certain resources top quality


During the working of timber pellet machine, you must make certain there is no stones or irons in the raw materials, in case they trigger damages to the die.



The moisture content in the raw materials must be 10%-18%. Dry product are tough to mold, which will escalate the abrasion of the pellet device. If the raw products are too wet, the wetness would certainly evaporate and also mix with the wood powders, as well as block the holes on die.


Website: https://berlinhappens.com/poultry-feed-processing-machine/