Notes

Just how to keep pellet mill die as well as roller?<br>
The roller and also die are the wearing components in a pellet maker. To make use of and also preserve them in appropriate method can lower the failing price, improve the production, elevate the functioning performance, save time as well as labor. If there is any kind of trouble in the roller and die, the creating rate and production would decline.



Fill up the die with oil mixture

Each time after using, or when you intend to change the die, remember to feed oil mixture (blended sawdust and waste oil) to the pellet device, eject all the biomass products and fill up the die openings with oil combination.



The biomass materials consists of moisture, which would certainly speed up the deterioration of the die, as well as cause it harsh inside. The oil blend filled out the die doles will secure them from rusting or rust.



Change the oil mixture every half a year

If you have actually leaved the pellet mill die apart for over a fifty percent year. You need to change the oil blend in the need brand-new, or they would solidify and block the holes. This will certainly impact the use for following time.



Address the block of the pellet mill die

If the die openings are blocked and also the timber pellets don't come out, we can make use of oil soak or preparing to soften the raw products, as well as make pellets once again. If this approach doesn't function, you can make use of drills to squeeze out the raw materials out, and also feed oil materials as well as fine sand mixture to grind the die.



Place the spare parts in appropriate places

Protect the pellet mill dies in ventilate as well as completely dry area. If protected in moist place, they will rust conveniently. If you don't use it for long time, you can layer it with a layer of waste oil to prevent rust of moisture in the air. Don't put the pellet mill die where the raw products are kept. The raw materials are simple to absorb wetness, which would certainly speed up the rust of the die.



Smooth the die as well as chamfer the die orifices

The holes on the pellet mill die are processed by high-speed weapon drill, which has high smoothness. Inspect if there is any type of bulges externally of the die, if so, smooth them with a flint glazing equipment. If the die orifice are secured or have inversion, you ought to chamfer the die orifices and also restore it.



Readjust the clearance in between the roller and die

In level die pellet device, the appropriate clearance between roller and die is 0.1-0.3 mm. If kl230 animal feed pellet machine is too tiny, the abrasion between the roller and also die will certainly magnify. If the clearance is too huge, the raw materials layer will be thick and the manufacturing will certainly decline. In ring die pellet machine, the ideal clearance is 0.1-0.4 mm.




Maintain the pellet mill die and also roller tidy


When the timber pellets have benefited thirty days, you require to clean up the roller and die with diesel or gasoline. Cover them with lubricant oil and install them once again. To make certain constant high production, we must keep the inside of the die clean.



If the ash is connected to the roller or the lubricating oil wants, the rollers would certainly revolve unsteadily, and the manufacturing rate will certainly be affected. Users must examine the working condition of rollers consistently.



Preheat the pellet maker

Every single time prior to making wood pellets, feed the oil mixture repetitively till the temperature within is up to 50 ℃. Then diy wood pellet maker can feed the biomass materials to make pellets.



In wintertime, as the weather condition is cold, the die is sickly, we should pre-heat the maker for longer time, to make sure that the pellet device can function better, the manufacturing is higher, as well as the service life is much longer.



Ensures resources top quality

Throughout the working of timber pellet device, you need to make certain there is no rocks or irons in the raw products, in case they trigger damages to the die.



The moisture content in the raw products need to be 10%-18%. Dry material are hard to mold, which will heighten the abrasion of the pellet machine. If the raw products are also wet, the dampness would certainly evaporate as well as combine with the timber powders, as well as obstruct the holes on die.


Website: https://railtransholding.com/fertilizer-pellet-mill/