Notes

Create a Disappearing Waterfall
If you are thinking about creating a Disappearing Waterfall (sometimes called a Pondless Waterfall) you need to set-up a step by step plan; having a plan in place will help you to track your progress and build each stage of your waterfall in the correct order. Without a plan you might "get the cart before the horse" and have to take apart a portion of your waterfall to complete a step that should have already been finished.

Constructing a Disappearing Waterfall can be an easy project for the do-it-yourselfer, also it can be completed in a weekend. With careful planning and a satisfying weekend of work is likely to yard, you might have a lovely water garden. It will be the focal point of your yard, and a gathering place for relatives and buddies.

What you would need: A Disappearing Waterfall kit, shovel, river rock 2-3 inches in diameter, decorative rock � -1 � inches in diameter, landscaping stone, foliage and plants.

A Disappearing Waterfall kit is an excellent way to get started. These kits contain almost everything you will need, like a pump, tubing, basin, colorful spillway, glue and other products for construction. Naturally the rocks, stones and plants choices are left your decision; that way you can use your imagination and make your Disappearing Waterfall unique.

Step 1 1: Dig a hole approximately the size of your basin. There should be a 4" space between your basin and sides of the hole and the most notable of the basin should be at ground level. Temporarily place the basin in to the hole: check to make sure the basin is level with the ground and has the required 4" clearance on the sides. Remove the basin. (Utilize the excavated soil to partially build your waterfall mound.)

Step 2 2: Cover underneath and sides of the hole having an EPMD pond liner and protective pad; be careful not to puncture your EPMD pond liner. (Place the protective pad close to the dirt and lay the EPMD pond liner next to the protective pad.) How big is the pond liner and the protective pad depends on the size of the hole.

Step 3 3: Fill the hole about half full of water to keep the pond liner set up.

Step 4 4: Place the basin into the hole; take care not to damage the pond liner.

Step 5: Place your submersible pump into the basin. Connect the tubing and electrical source to the pump.

Step 6: Fill the space between your pond liner and basin with river rock that is 2-3 inches in diameter. Fill to within 2 � inches of the very best of the hole. Fill the hole with water.

Step 7: Build your waterfall to the height and width you desire.

Step 8: Install the waterfall weir.

Step 9: Run the tubing from the basin to the most notable of the waterfall and connect it to the waterfall weir.

Step 10: Establish the road that you want your waterfall to follow and cover the road having an EPMD pond liner and protective pad (underlayment). Place the pond liner and protective pad exactly as you did in step 2 2. Run the pond liner and pad all the way from beneath the waterfall weir down to and overlap the basin by about 5 inches.

Step 11: It is time to decorate your waterfall with rocks and plants. Choose rocks which are common to your area and utilize the rocks to direct and control the flow of the water. (Flat rocks work especially well to slow the flow of the water and create the sound of running water.) Select hardy plants that are native to your neighborhood and fitted to a waterfall. Make your waterfall look as natural as you possibly can.
Website: