Notes

The 10 Scariest Things About Saab Key Fob Programming
Saab 93 Key Fob Replacement

Saab key fobs 93 can be costly to replace. The process is straightforward.

You'll need a flathead phillips screwdriver and some patience. Simply place the screwdriver in the middle of the case and slowly open to open it.

It is recommended to keep spare fobs and keys. You can avoid being stranded and paying towing fees.

How to replace a battery

All car key fobs that lock and unlock the vehicle remotely are equipped with batteries inside which will eventually die. When this occurs owners can replace the battery in the key fob themselves with a few simple steps. The key fob is equipped with two plastic flaps on one side that you have to open to remove the battery and replace it with an alternative one. The CR1632 standard battery is used to replace. It is easy to install.

Once the emergency code is removed from the remote, you can then make use of a small flathead screwdriver to split the case of the remote fob. Don't force the case too much as the electronics are fragile and could be damaged by excessive pressure.

Saab created some fantastic cars. Many of them are still in circulation today. One of the biggest issues with these cars is the ignition keys. They're not the most robust, and they can become sticky or lose their grip as time passes. If the Saab owner loses their one working key, it can be quite costly to buy an additional key at the dealer, because they'll need to replace the entire computer module and then program it with the new key to convince the vehicle that you're not trying to steal it. You can save a lot by replacing the case.

How to Remove the Manual Key

Key fobs that are used to can lock and unlock a car contain batteries and those batteries have a life span. If you're like the majority you'll lose yours at some time. It's not difficult to replace manual key fob batteries. The only difficult part is removing the old one from the case, but that's nothing a little patience and some good work with a flathead screwdriver cannot assist you with.

Once you have the new battery installed It's time to put it back together. To accomplish this, you'll have to open up the replacement key fob case. This is done by inserting a flathead screwdriver into the slot located in the middle of the case. Be gentle with the case until you're able to take it off.

You may need to re-program the new key fob in case your previous key fob failed to establish its connection to the car's security system. You can do this by following the manual process to add a new fob for your Saab 9-5 2010. This method DOES NOT invalidate previously learned keys which means you can use your existing FOBs if they need to be re-programmed. To begin this process the FOB to be programmed must have the mechanical key cut matching that of the vehicle.

How to Resolve the Case

Whether you're replacing the battery or manual key, it's a good idea to replace the case too. The cases are susceptible to wearing out, especially after a long period of use. The process of changing the case on your SAAB 9-3 can be relatively easy, and you don't even need any special tools to accomplish it.

To replace the case, it is necessary to first remove the manual key from the key fob. You can do this by pressing the blue SAAB logo on the fob and then pulling the manual key out. It could be necessary to apply a little force in order to remove the manual key from the fob.

Once you've removed that manual key, you can begin working on removing the electronics from the case. To do this, you'll require a small screwdriver with a flat head. You'll want to be careful not to harm the electronics inside, so be gentle when using your screwdriver. Once you've removed the electronics, you can start working on the removal of the battery. After you've replaced your battery, you can then put everything back together in an entirely new case. You can buy replacement cases online for very little.

How to program the new key?

All key fobs, that permit you to lock or unlock your vehicle remotely, have batteries. However, they have a limited lifespan. It is essential to remember this and replace the battery in your key fob at least every three to four years. Fortunately, how to program saab 9-3 key fob is an easy procedure that can be completed at home. All you need is patience and an incredibly small screwdriver for phillips screwdrivers.

The first step is to remove the manual key. Press the blue SAAB logo and pull the emergency key from the key fob. The key will easily pop out using some force. Once you have the key fob open you can take out the battery that was in it by gently pushing the screwdriver into the slot located in the middle of the case. This will split the case making it easier for you to access the electronic components.

It is now time to program the key. You can do this by following the steps in this video posted by YouTube user Cyclone Cyd. This video channel provides great instructions on how to perform simple maintenance and repairs on vehicles.


A key fob can be an excellent way to keep an extra car key in the event you break or lose the original. You can purchase a new keyfob online or from an authorized locksmith in your area like United Locksmith. The cost is significantly less than purchasing the key from a dealer. They will charge you for the key, and then program it into your car.

Homepage: https://www.autokeys-r-us.co.uk/2981-2/