Notes

5 Clarifications On Door Locks Aylesbury
Types of Door Locks for Patio Doors in Aylesbury

Sliding patio doors in aylesbury are a great way to increase the amount of light entering your home. They are also simple to maintain and are very secure from burglars.

A customer contacted us to discuss the possibility of installing a new lock on their front door. After a discussion of a variety of options, the customer chose to have a Yale Night latch fitted along with a brand new set of keys.

Sash Locks

Sash locks, one of the most popular types of mortice locks, work using a combination latches as well as deadbolts. These locks are installed within the door's material and operate with keys to unlock or lock them. They are perfect for both front and back doors because they are extremely secure. Sash locks come in a variety of sizes that can be adapted to all door thicknesses. They can also be installed on UPVC and hardwood doors.

There are many different types of sash locks however the most well-known are the five lever sash lock and the three lever sash lock. The five-lever mortice lock is one of most secure options and is compliant with British Standards. It also features face plates and a striker that can be found in a variety of finishes that match the door knobs or handles. The three-lever lock is not as secure, but it still provides enough security for domestic use. It is also simple to modify, since it features fewer levers and can be used on all internal doors.

The rim profile sashlock is a different type of sashlock. They are similar to sash lock, however they differ in that they do not fit into the door. They are secured to the surface and can be locked from both sides. They are ideal for interior doors that require privacy, like bedrooms and bathrooms.

A sash lock is a fantastic option to keep your home safe from burglars, and keep your children safe. These locks prevent the sash opening too much and will ensure that your children do not fall out of the windows. They are available in a range of sizes, ranging from 3 inches to 5 inches and are a great addition to any window restoration project.

Sash window locks are simple to install, and can be done at home by any D.I.Y enthusiast. To begin, you'll require a ruler and pencil to mark the center location where you would like to place the lock. Once you've marked your central point, you'll need to remove the screws that held the sash. After removing the screws you must wash off any paint or debris that might have remained. After that, you can install the new fastener.

Mortice Locks

A mortise lock is a relatively large mechanism that fits into the door's interior. They're commonly seen in older buildings as well as contemporary residential construction. In door repair aylesbury can still buy mortise locks from hardware stores today. It's a strong and secure choice. It is ideal for the security of high traffic areas like schools or hospitals.

You cannot utilize a mortise locking system with a standard knob or handle as the bolt will only retract when a key is inserted. It is also crucial to select handles and knobs that fit perfectly into the lock case. The bolt will not be able move unless you turn the knobs. If you're not sure, check the diagram of your lock for more information.

Mortice locks are generally made of heavy materials that are able to withstand a lot of wear and tear. Their size and weight make them very difficult to break into, even when subjected to extreme pressure. They are a great option for areas with high traffic such as hospitals and schools, where they will be subjected to a lot abuse.


Mortise deadlocks are available in various styles and security levels, just like rim locks. For example there are three lever mortice sashlocks that are often employed in doors for internal use like bedrooms and porches. However, they're not considered to be as secure as a five-lever mortice lock because they have less levers, which means they present a greater risk for key duplication.

If you're thinking of fitting mortice locks to an exterior door, you need to check that the one you purchase is British Standard approved. This will ensure your door is safe and stop intruders entering your home or taking valuables.

A mortise locks works by locking in a pocket that is cut into the frame of the door. This pocket is known as a mortise, and the lock is held by a "lock case" that is attached to the door frame with nails or screws. A hard collar is usually placed on the outside of the lock to prevent it from being removed with a pipe-wrench.

Cylinder locks

Cylinder locks can be used on uPVC wood, composite or timber doors. They are comprised of two components that are the lock that is activated by the latch or deadbolt and the cylinder that manages it. This design allows for both of these parts to be replaced separately should they be required. This is useful in the event that a component doesn't perform as expected or you wish to upgrade to a safer cylinder.

The lock cylinder is equipped with series of pins in it. It is the part of the lock that receives keys. When a valid key is placed in the lock and the notches on the key push the pins up to different levels so they can rotate and open the door. If you insert an incorrect key, the notches won't align and most of the pins will remain at their normal position.

There are a myriad of cylinder locks, from basic pin tumblers to high-security variants that are resistant to a variety of lock picking methods. The more pins in a locking cylinder, the more difficult it will be to pick them. A normal cylinder lock will typically have six pins, whereas higher security models could contain as many as 13 pins. These pins can be described as "security pins". Security pins come in many varieties, such as spools with narrow waists that are machined which looks like the cotton spool. They may also be serrated pins that have one or more narrow grooves.

A cylinder lock is much easier to install than a mortise lock because it doesn't require the door frame to be drilled. However, it is still recommended to get your door frame measured and fitted to ensure that the lock is correctly positioned. If your door isn't square, you'll have to choose an offset cylinder.

Cylinder locks are cheaper than smart locks and offer a good level of security. They are an excellent option for homes with less protection or for those who want to lock their house quickly. They are especially efficient if the door has a a pre-drilled hole for the lock.

Mullion Locks

A mullion is a central section that divides the double doorway, making it possible for one side of the doorway to be used as a single door. It can be fixed or removed. Mullions are made of wood, plastic or metal and are often used in conjunction together with mortise locks and rim exit devices. They enhance the security of double doors and offer more space for exits than rods that are vertical. They are also great for high use, hurricane and fire-rated doors.

In a typical installation, the mullion is attached to the frame head and secured to the floor during construction. Certain mullions are removable. This makes them an ideal choice for commercial applications in which doors' locations may change frequently. For example when a business owner plans to install an employee entrance in the back of their building, they could simply remove the mullion to allow deliveries and larger furniture to pass through the door.

The removal of screws and bolts is required for conventional mullions. These fittings are inserted into the floor or the top of the door's frame. This is a lengthy and time-consuming process that often requires two people. Over time, repeated removals could cause the fittings and mullions loosen. When the mullions are not installed, large machinery carts, gurneys and carts are unable to easily move through the opening.

A keyed door mullion that can be removed has been developed to solve this issue. It permits the removal of a mullion easily and quickly from the top bracket by using the rim the cylinder. This is useful when a large, unobstructed opening in the door is required. The PDQ 9300 series removable mullions were designed to be used with the Rim Exit Devices 6300/6400 series of doors that are in pairs. They also enable the top bracket of the mullion to be lifted away from the upwardly extending protrusions 42 and 43 on a bottom fitting 20 that is permanently attached to the floor 14. The latch then releases and the mullion may be temporarily removed. The mullion will be automatically engaged the latch when it's returned.

Read More: https://www.repairmywindowsanddoors.co.uk/aylesbury-windowrepair/