Notes

How to maintain pellet mill die and roller
Just how to keep pellet mill die and also roller?
The roller and die are the using parts in a pellet device. To use as well as keep them in best means can lower the failing rate, enhance the production, increase the working efficiency, conserve time and also labor. If there is any kind of issue in the roller and also die, the creating price and also production would certainly decline.


Fill horse feed pellet machine with oil blend
Every single time after using, or when you intend to change the die, remember to feed oil combination (combined sawdust and waste oil) to the pellet machine, eject all the biomass products and also fill up the die holes with oil combination.

The biomass products includes wetness, which would certainly speed up the corrosion of the die, as well as create it harsh inside. The oil mixture filled out the die doles will secure them from rusting or rust.

Change the oil mix every half a year
If you have actually leaved the pellet mill die aside for over a fifty percent year. You need to change the oil blend in the die for brand-new, or they would set and block the holes. This will influence the use for following time.

Fix the block of the pellet mill die
If the die openings are blocked and the timber pellets do not come out, we can use oil soak or preparing to soften the raw products, and also make pellets once again. If this method does not work, you can utilize drills to extrude the raw products out, and also feed oil products and fine sand blend to grind the die.


Place the extra parts in right places
Maintain the pellet mill dies in ventilate and completely dry location. If protected in damp area, they will corrode easily. If you don't utilize it for very long time, you can layer it with a layer of waste oil to avoid rust of wetness in the air. Do not put the pellet mill die where the raw materials are kept. The raw products are very easy to absorb dampness, which would certainly speed up the rust of the die.

Smooth the die and also chamfer the die orifices
The holes on the pellet mill die are refined by high-speed weapon drill, which has high level of smoothness. Inspect if there is any protrudes on the surface of the die, if so, smooth them with a flint glazing equipment. If the die orifice are secured or have inversion, you need to chamfer the die orifices and refurbish it.

Readjust the clearance in between the roller and die
In flat die pellet equipment, the appropriate clearance between roller and also die is 0.1-0.3 mm. If the clearance is as well tiny, the abrasion in between the roller and also die will certainly increase. If the clearance is too big, the raw materials layer will be thick as well as the manufacturing will certainly decline. In ring die pellet device, the suitable clearance is 0.1-0.4 mm.

Keep the pellet mill die as well as roller tidy
When the timber pellets have benefited one month, you require to tidy up the roller as well as die with diesel or fuel. Cover them with lubricating substance oil and also install them once more. To guarantee stable high production, we need to maintain the within the die tidy.

If hay pelletizer is attached to the roller or the lubricating oil wants, the rollers would certainly turn unsteadily, as well as the manufacturing speed will be influenced. Users need to inspect the working condition of rollers routinely.

Pre-heat the pellet maker
Every single time prior to making wood pellets, feed the oil mixture repetitively up until the temperature level within is up to 50 ℃. Then you can feed the biomass materials to make pellets.

In winter months, as the weather is chilly, the die is sickly, we should preheat the machine for longer time, to ensure that the pellet equipment can function better, the production is higher, and the life span is longer.

Makes sure basic materials high quality
Throughout the working of timber pellet equipment, you need to make certain there is no rocks or irons in the raw products, in case they create damage to the die.

The wetness content in the raw materials must be 10%-18%. Dry material are tough to mold, which will certainly heighten the abrasion of the pellet equipment. If the raw materials are as well moist, the wetness would vaporize as well as blend with the timber powders, and also obstruct the holes on die.


Here's my website: https://losaricoffeeplantation.com/wood-pellet-mill-for-sale/