Notes

How to prolong the working life of a pellet machine
How to prolong the working life of a pellet equipment?
Every equipment has a particular functioning life. It depends on the using parts. In terms of pellet equipments, the using parts consists of roller, die (ring die or flat die), bearing, and also transmission, etc the working life of a ring die is 800-1200 hours, a level die is 600-800 hours, and a roller is around 1000 hrs. The working life is established by the item quality, but additionally influenced by your utilizing habits. Proper usage as well as regular upkeep can prolong the functioning life of a pellet machine.

Feed the pellet machine with oil combination
Every single time when you complete pellet manufacturing, feed oil mixtures (combined sawdust as well as used oil) to the pellet equipment and also allow it operate for 1-2 mins, after that you can shut down the machine. After this procedure, the die openings are filled with oil mixture as well as won't obtain blocked by the resources With this step, you can begin making pellets straight the next time. It can not only save your time but also prolong the functioning life of the pellet equipment.

But if you don't utilize the pellet equipment for over 1 month, you would certainly much better get the oil combination in the die, or they would certainly get set and also not easy to clear. This is bad for later usage.

Control the pureness of resources.
Before beginning the machine, ensure there is no foreign matters in the feed hopper. Yet do not place wood pellet mill near me into the receptacle when the pellet machine is running. If there is uncommon sound in the feed receptacle, you need to shut down the machine and get rid of the contaminants, as well as begin it once again.


Make sure there is no stones, metals, big wood obstructs in the raw products. Condition allowing, install a Tublar Magnet or a RCYB on the feed receptacle to avoid metals entering into the pellet equipment. Besides, you can make use of an automatic feeder to achieve consistent feeding, so that the pellet manufacturing is much more smooth.

Control the moisture material
Generally, the moisture web content of resources must be 10% -18%. If the wetness material is as well reduced, the raw materials will certainly be too hard. chicken feed machine price will certainly boost the power usage and the abrasion of the pellet equipment. On the other hand, resources with high wetness material are tough to grate, which will certainly enhance the abrasion of the hammer mill. Besides, Journalism and also rubbing in the pellet mill will heat up the raw products and also create the moisture to evaporate. The vaporized wetness will certainly mix with the wood powders and also obstruct the holes on the die, hence lowering the pellet production.

Clean the elements routinely
The pelletizing process will certainly generate a great deal wood dust, however the pellet equipment are typically not geared up with dirt defense gadget. This requires us to clean the roller, die, major shaft as well as bearing routinely. Clear up the sawdust in slots, spaces as well as screw holes, or they might cause crack of the parts.


If you do not make use of the pellet equipment for long period of time, I suggest you to dispatch the elements and also clear up the pellets inside the die and the sawdust affixed to the mold and mildew surface, incase they become stiff as well as hard to remove. At the same time, the sawdust will absorb water and increase the corrosion of the elements.

Oil the roller, shafts and gearbox
Before the first time use, add lubricate oil to the transmission, shafts and bearings. In day-to-day usage, you should lubricate the roller and main shaft every day, and also lubricate the transmission every a half year. If the roller is short of oil, it will certainly trigger damages to the bearing and also roller shaft, even break down the pellet equipment.

Choose suitable size of die
The hole dimension of the die is from 2.5-10mm, and the 4mm, 6mm as well as 8mm is one of the most popular. The dimension of die is determined by the resources. If the holes are undersized, the pellet return will certainly be low as well as also no pellets appearing. Meanwhile, they will increase the stress in between the roller and die and shorten the functioning life of the pellet machine. So you need to seek advice from the sales to choose a suitable die

Change the clearance between the roller as well as die.
The roller as well as die (flat die or ring die) is the core part of the pellet machine. Their clearance influence the pelletizing result as well as the working life. The suitable clearance is in between 0.1 mm as well as 0.3 mm. If the clearance is larger than 0.3 mm, the raw product layer will be also thick and decrease the pellet return. If the clearance is less than 0.1 mm, the abrasion of the roller and die will enhance, as well as affect the functioning life.

In flat die pellet machine, there are changing nuts on the 2 sides of the equipment body. Tighten them up as well as screw back for 15 ° -30 °. Maintain both screws in balanced placements. After that, you can fasten the lock screws. In ring die pellet equipment, ensure the clearance in between each side of the roller and also the ring die is the same. Simply put, the roller and also ring die must in the exact same axis, in case the eccentric roller cause abrasion to the ring die.

Place the pellet equipment in completely dry locations
To secure the pellet equipment from damp, we need to place the pellet equipment in a clean, completely dry as well as ventilated setting. The metal parts are easy to obtain rust under wet condition, as well as the electric motor will certainly have shortcut or electric leak. These will certainly reduce the working life of the pellet machine.


Here's my website: https://www.blablaface.net/fertilizer-manufacturing-machine/