Notes

The Most Popular Ghost 2 Immobiliser Reviews That Gurus Use 3 Things
Ghost 2 Immobiliser

Ghost is a wireless security system that guards your car against key cloning and hacking. It connects to the ECU unit through the CAN data network. It is quiet and can't be recognized by thieves.

It is only disarmed by entering a specific button sequence (like PIN codes) that you've programmed using the buttons in your car - such as those on the steering wheel or on the centre console.

Make sure you're protected from theft

With car theft increasing and cars being stolen in seconds It is imperative that every car owner considers the extra security measures available to them. Using an immobiliser is one of the most effective and most established ways of keeping your vehicle safe. Ghost immobilisers are an excellent choice since they are small and concealed within the vehicle's wires. They also do not emit radio frequency signals. They are therefore undetectable and can be fitted without having an impact on the CAN bus system of your vehicle.

Unlike other immobilisers that rely on tags, keypad input or a specific sequence of keys to disable them the ghost immobiliser that is located near me can only be disabled with the exact pin code set up by us at the time of installation. This unique disarm sequence uses the buttons already present in your vehicle such as those on the steering wheel, doors or centre console to stop anyone from starting the engine and driving away your vehicle. This makes it impossible for thieves to duplicate your key or use jamming/spoofing devices which could disable standard immobilisers.

Not only does a ghost immobiliser prevent your car from being driven and parked, it also prevents the car from being taken to make parts. This is a growing problem in the UK due to the growing popularity of these automobiles. It can happen in less than a minute. Ghost immobilisers from TTW are easily programmed to protect your vehicle from these types of attacks.

Installing our Ghost 2 immobiliser will prevent your car from being taken at a garage or service station, or even if it is being driven in the garage by an employee. This is because the Ghost can be set to Service/Valet mode only and allow a specific button sequence to be entered by you, our customers.

Contact us today if you would like to learn more about our Ghost immobilisers, or if you would like a free quote. We will be happy to assist you and provide you with peace of mind that your vehicle is secured at all times.

No Key Fobs or LED Indications to identify its location.

This non-detectable car immobiliser integrates with your cars CAN network to guard your vehicle from the newest type of car crime. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators to function instead it uses buttons in the standard factory controls that are already in your vehicle such as those on the steering wheel, door panels, and the center console. This creates a hidden code that must be entered in order to start your vehicle, which makes it impossible for thieves to locate.

The CAN-BUS device developers have also included extra high-security measures to guard against the device being hacked or by-passed. It also provides CAN-BUS blockage and a physical immobiliser cut meaning that even if your keys were stolen, the burglar cannot drive away with your joy and pride.

Installing the CAN BUS in your vehicle is a simple and quick procedure that takes just 30 minutes. We will have one of our staff in your area to set up an appointment time and location that is convenient for your needs. After your vehicle has been equipped, you will receive an registration number and unique security codes for your phone as well as the app to make it easy to use and ensure you are always in charge of your car's security.

The system is compatible with a wide range of modern vehicles, however should you own a vintage or specialist car, please contact us to confirm compatibility. The supply and installation price of The Ghost Immobiliser is APS449 and your vehicle will be added to the International Security Register if fitted by one of our certified installers. If you have any questions, don't hesitate to contact us with our helpful team. We'd love to hear from you.

Easy to Install and Program.

Modern cars are usually fitted with immobilisers to prevent thieves from hot-wiring or stealing your vehicle. In contrast to physical deterrents like steering wheel locks or wheel clamps, an immobiliser is covertly integrated inside your vehicle, making it nearly impossible to locate and defeat.

The system connects directly to the CAN data network of your vehicle. It stops it from running until you enter the unique code. The device is small and sealed, so it can be placed anywhere inside your vehicle, without the need for additional wiring. It doesn't also emit any radio frequency signals which means it can't be detected by RF scanning or code grabbing devices used by thieves.

Ghost utilizes your vehicle's current buttons on the steering wheel, door panels and centre console to generate a customisable disarm sequence (like the PIN code) that needs to be entered to authorise startup of your car. The pin code sequence is based on 4 to 21 button presses and is easily reprogrammable if required. You can even place your car in Service/Valet mode so that it can be operated but the vehicle will not start and drive. This will keep your car safe when you take it in for servicing or valet parking and ensure that the mechanic isn't able to access your pin code in order to deactivate your system.


If you're away from your vehicle for a long period of time, such as on a vacation or business trip You can use our app to get a temporary pin. You can manually enter your pin when driving the vehicle.

The CAN bus immobiliser can be linked to an electronic remote key fob or tracker (Brand dependent) which will have priority over the ghost system. This is great for extra security in the event that your vehicle gets stolen or you lose your keys.

If you're looking for a method to protect your vehicle from key-cloning and hacking contact us today to see how we can assist. We provide our services across the UK and also in our own installation centre in Derby.

Service/Valet mode

Modern vehicles have sophisticated stop/start eco systems that require right inputs to function properly eg battery voltage as well as engine temperature, external temperatures and what electrical systems are operating. Sometimes, these can cause issues and are often difficult to diagnose if it is Ghost related or not. This is especially the case if your car has recently been serviced or valet-parked. You can utilize the ghost service mode to allow the vehicle to begin and drive temporarily without a pin code. This can be useful for the time that your car is being inspected or at an independent garage.

To enter service mode simply press the service button five times. The indicator signal will flash twice to show that the service mode has been activated. It is possible to exit service mode at anytime by entering a PIN number. When you exit the service mode then the Ghost immobiliser is restored to normal operation.

This is a very discreet system that communicates with the vehicle's ECU using the CAN data circuit, connecting directly to the original vehicle buttons and not using radio frequency signals like other immobilisers. This makes it nearly impossible for any other device to hack or bypass - even jamming devices that spoof codes from an original key fob do not affect this system.

It is a TASSA verified anti-theft system that meets the highest standards of protection. It has the only marking system that connects to the international security registry which is required by insurance companies.

The ghost immobiliser is a compact device that can be easily concealed in the wiring of your vehicle's factory. This makes it nearly impossible for thieves. The sealed unit is so small that it can be mounted in many areas of the car, including under dashboards or on the steering wheels.

The system makes use of the buttons you have in your vehicle (such as the ones on your steering wheel doors, door panels or the central console) to enable you to create an exclusive and customizable disarm sequence up to 20 press long. It must be entered before your vehicle will start. It is able to be entered by anyone who has your pin code - it is safe and secure for you and your family members, colleagues, or friends to use.

Homepage: https://www.thekeylab.co.uk/car-security-ghost-immobiliser/