Notes

The No. One Question That Everyone Working In Saab Key Fob Programming Must Know How To Answer
Saab 93 Key Fob Replacement

Saab key fobs with 93 keys could be costly to replace. However, the process is very easy.

All you require is a flathead screwdriver, and some patience. Simply place the screwdriver in the middle of the case and slowly pull to open it.

It is recommended to keep spare keys and fobs. You will avoid being stuck and paying towing fees.

How to Replace the Battery

Key fobs for cars that allow you to lock and unlock your car remotely have a battery inside that will eventually fail. When this occurs, owners can replace the key fob battery themselves in just a few steps. To remove the old battery from the key fob and replace it with a brand new one, you have to open two flaps of plastic that are located on one side. The CR1632 battery that is standard in size can be used as a replacement. It is simple to install.

Once the emergency key is removed from the remote, you can then make use of a small flathead screwdriver to break the case of the remote fob. Do not force the case too hard because the electronics are fragile and may be damaged by too much pressure.

Saab produced some incredible cars. Many of them are still in circulation today. The ignition keys are one of the most problematic aspects of these automobiles. They're not the most robust, and the buttons could become sticky or lose their grip as time passes. If an Saab owner loses their sole functioning key, it could be costly to purchase a second one at the dealership, since they must replace the entire computer module, and then program it with the new key to convince the vehicle that you're not trying to steal it. You can save money by replacing the case.

How to Remove the Manual Key

Key fobs that allow you to lock and unlock your car are powered by batteries, and those batteries do have a time-limit. If you're like most people you'll lose yours at some point. Fortunately, replacing the battery for your manual key fob is easy. The only difficult part of the procedure is taking out the old battery from the case. But with patience and a flathead screwdriver you can accomplish it.

After you've put in the new battery, it's now time to reassemble the entire thing. You'll need a flathead to open the new case on the key fob. Insert the screwdriver into the middle slot. Gently work the case until it splits and you can remove it from the key fob.

You may have to re-program the new key fob if your previous key fob failed to establish its connection to the car's security system. You can do this by using the manual learning method to add a new FOB for your Saab 9-5 2010. This method does not erase previously learned keys which means you can use the existing FOBs in case they need to be re-programmed. To initiate this procedure the FOB that will be programmed must contain the mechanical key cut in line with the model of the vehicle.

How to Resolve saab key

If you're replacing the battery or manual key it's a good idea replace the case as well. The cases can wear out quickly, especially when they are used for a long time. The process of changing the case on your SAAB 9-3 can be a relatively simple process and you don't need any special tools to perform the task.

To swap the case, you'll need to first remove the manual key from the key fob. This can be accomplished by pressing the SAAB logo and then pulling out the manual key. The fob for the key may be sticky sometimes, so it may take a little amount of force to pull the key out.

After you've removed your manual key, you can start working on removing the electronics from the case. You'll require a flathead screwdriver for this. Be gentle with your screwdriver so as not to damage any electronics. Once you've removed all electronics, you'll be able to begin taking off the battery. After you've replaced the battery you can put everything back in a brand new case. You can purchase cases to replace the original ones at a reasonable price.

How to program the new key?

Key fobs that allow you to lock and unlock your car remotely are equipped with batteries, however they have a limited lifespan. It is crucial to keep in mind this and replace the battery on your key fob every 3-4 years. This is a simple process which you can perform at home. All you require is patience and a small flathead phillips screwdriver.

The first step is to unplug the manual key. You can do this by pressing the blue SAAB logo on the fob of the key and pulling the emergency key out. The key should pop out with some force. After you've opened your key fob, you are able to remove the battery by gently pressing the screwdriver in the slot in the middle. This will split the case and make it easier to get at the electronic components.

It is now time to program the key. You can do this by following the steps laid out in this video by YouTube user Cyclone Cyd. This is a great video channel that offers instructions on how to perform simple maintenance and repair jobs on vehicles.


The key fob is an excellent method of keeping an extra key in your vehicle in the event that you lose one or break it. You can purchase a new keyfob on the internet or from local locksmiths like United Locksmith. The cost is lower than purchasing the key from a dealership. They would charge for the key and then program it into your car.

Homepage: https://www.thekeylab.co.uk/saab-car-keys/