Notes

Install Vinyl Fencing Tips From The Best In The Business
How to Install a Vinyl Fence

A fence made of vinyl is a beautiful low-maintenance method to draw lines between your property and keep pets and children securely confined. But installing it yourself requires careful planning and attention to detail.

The first step is to stake out your intended fence line and estimate how many posts you'll need. In general fence posts should be placed 6 to 8 feet apart.

Dig Postholes

Make postholes in your fence line using a power auger or digger (check for local codes). The holes should be around 10 inches in diameter . They should also be deep enough to hold about one-third of the length of the pole plus 6 inches of gravel backfill. Gate posts and main supports should generally be six inches deeper than other posts, to boost the strength of the post.

After digging the posts, pour around six inches of gravel into the holes, and then fill them with quick-setting concrete, following the mixing and setting instructions on the bag of concrete. Tap the hollow post into the concrete and make sure that each post is level and level before moving onto the next.

If your fence is positioned over a water source Consider a drainage plan to prevent the water from getting into the post holes. It is also possible to add the gravel layer between the fence and the ground to help to prevent erosion of the soil.

Contact your local utility diggers hotline before you begin digging. They will mark underground lines. This helps you avoid any surprises, such as leaky sewer or water line, while installing your fence.

After marking the holes, dig each one to a depth of 2.5 3' to 2.5'. The bottom of the hole should be larger than the top of the post, in order that it will be able to fit into the rails of the post when you put them in.

Cut Posts to Length

It is essential to ensure that the posts are the same length if you want to install vinyl fencing. This is crucial because it allows the fence to bend without breaking. This helps ensure that the fence can stand up to minor impacts and high winds.

You can make sure you have the exact length of posts by using a level to measure them, and then marking them on strings. You can mark the strings on the ends of the posts or use them to align the postholes.

Once you have the posts marked and drilled, you can dig holes to the correct depth for the fence. They should be deep enough to hold 3 feet of post , plus 6 inches of gravel, which provides a base for the post and will help drain water away from it.

Then, insert the bottom rail into each post and secure it with self-drilling screws. This will stop the top rail from slipping off the post and allows for in-and out movement.

After the bottom rail has been installed, slide your pickets along the u-channel until completed the entire section. After that, you can slide in your top and middle rails.

When installing vinyl privacy fences make sure you install the u channel before you attach the top rail to the post. This will prevent your fence from sliding off in the wind and also help to keep out insects and other debris.

Install Posts

It is essential to follow the manufacturer's guidelines when installing a vinyl fence. This includes digging holes that are sufficient in depth to hold at least 1/3 of the post's length, and six inches more if you're using a gravel base.

If you're installing a vinyl fence on a slope, it's especially critical to make sure the posts are level. A post that is elevated can cause the entire fence to lean and make it difficult to secure the fence panels.

To ensure that your posts are set straight using a string, tie it to each corner or the end of each post before you dig the hole for it. This will help you determine exactly where your posts are.

To provide vinyl fence install with more strength and stability, the posts should be at least a third larger than their length. Digging them with a post-hole digger is a fast and easy method of doing this, however, you can dig them manually.

Once you have the posts in place then fill them up with concrete. The cement should be around 1 foot deep, and evenly spread. This will make the posts more sturdy and allow them to withstand strong winds.

Once the posts are in place After that, you can attach the rails. The rails snap into slots on the top and bottom of the posts. Once they're secure you can slide the vinyl fence panels onto the posts.

Attach Posts to Rails

Vinyl fences are constructed on posts and should be strong enough to support the weight of the fence. If the ground is shifting and the posts are unable to hold, they could shift or tipping, which could cause damage to your fence. The best method to ensure the stability of your posts is to install concrete in the base.

Connecting a post to rail can be a challenge, but it is not impossible. To keep the post straight and level, you can use a "post brace". These are usually made from 2-foot-by-four-foot boards that attach to the post with nails or using a claw hammer.

Once the post is secured, place the rails on the top. If you are installing split rails then slide the rail on the bottom down until it clears one of the posts that are adjacent. Continue adding rails until all posts have been put in place and the fence is completed.

For pickets that have spaced spaces, check with your local code enforcement for specific spacing. If your fence is situated in a sloped area it is possible to cut the pickets in an angle pattern. Although it's not essential, it can hide the boards the uneven ends.

It is important to choose the right fencing style for your property and landscaping. The fence should fit with the overall design of your property and offer privacy, security, and curb appeal. The appropriate style can help reduce the cost of maintenance and replacement of your fence.

Attach rails to posts

Vinyl fences are easy to set up and are available in a variety of styles. They include privacy fences as a well as split rail fences and picket fences. They are an increasingly popular alternative to wooden fences due to their strength and low maintenance.

To ensure that your vinyl fence is set in a straight line and in an even line, measure the distance between each post before you begin digging holes for the posts. Then use a string to mark and place the posts.

When the posts are ready to be drill, leave 5 to 6 inches above ground level for each hole. You can also put concrete on the post's base when you have a sloped lot.

Once the posts have been installed, you can add fence rails to the posts. The vinyl fence rails come in 16-foot and 8-foot lengths and you can pick the most appropriate size for your home.


If the fence has corners you'll need to cut the rails to fit around the corner. To slide the rail through the corner posts, you can utilize one end of the rail and the opposite end to slide it through another post.

After attaching the rails, put the fence pickets on the rails. This will give your fence a professional appearance. It will also give you a chance to visually grade your fence so that it appears consistent from an extended distance.

Attach posts to other posts

Vinyl fences are an excellent option for homeowners looking to enhance their property's appearance, privacy, and also protect their yard from weather-related damage. They are sturdy and require very little maintenance.

There are a myriad of styles of vinyl fences that include solid privacy, picket and more. You can choose from a range of colors and sizes of fences, some even have a lifetime guarantee.

Consider the manufacturing process of the vinyl fence manufacturer when selecting a fence for your home. There are two main methods of making vinyl fencing: monoextrusion and co-extrusion.

The first method injects polyvinyl chloride (PVC) with UV inhibitors to prevent fading and chalking. To create a capstock as well as a substrate the second method employs a double layer of PVC.

Vinyl fences are also infused with stabilizers, impact modifiers and other substances that make them tough and flexible. They are impervious to decay and rot and some fences have the promise of a lifetime.

If you're uncertain about the type of fence you want to purchase, ask your local dealer for suggestions. They will be able to guide you in the right direction and suggest the most appropriate product for your requirements.

Once you have chosen a fence made of vinyl that will fit your home, it's time to get started with the installation. This portion of the job can be a bit challenging and therefore it's important to follow the steps carefully.

Homepage: https://provinylfencing.com/vinyl-fence-installation-services/