Notes

Are You Confident About Motorcycle Key Fobs? Answer This Question
Motorcycle Key Repair

A motorcycle is an excellent way for you to experience the open road and all the thrilling adventures it offers. It can be stressful when you lose your keys or get stuck in the ignition.

There are numerous ways to get your bike back on the road with no compromise to the freedom it enjoys. This article will look at frequent issues that could affect your bike and how you can address them.

Damaged Ignition Cylinder

If you are trying to turn on the ignition of your motorcycle but you are unable to do so, it could be a sign that the cylinder for ignition has been damaged. Although this is not always the case, it is best to have it checked.

A damaged ignition cylinder may cause numerous problems that affect the ability to start your vehicle. This problem is usually easily fixed.

1. The Key won't turn - This is one of the most frequent signs that your cylinder is damaged or worn out. This is usually caused by the pins of the tumblers becoming worn down over time.

Try jiggling the key to different positions or applying lubrication to test if this will help you turn it. If the issue persists, it's likely that the ignition cylinder is severely damaged.

2. The Ignition Switch is stuck - This happens when the key presses the ignition button in a way that causes it to become jammed or to become stuck. To allow the switch to move freely you can make use of silicone-based or graphite-based grease to lubricate it.

3. The car won't start - This is another indication of an ignition cylinder that is beginning to break down. If your vehicle is equipped with transponder keys, it will need to be programmed to allow the start of the engine.

4. Broken Ignition Housing Gears - This is not common, however, it could happen to certain models. The ignition will then begin to turn off and on loudly.

5. A Worn Key If you own worn keys, they could damage the "wafer" tumblers or pins in the lock cylinder. This could stop the key from turning correctly and prevent it from unlocking your vehicle.

It is recommended for a professional to replace the cylinder for you, as this process may be too difficult for many people to do on their own. If the cylinder has been damaged for a time, it will need to be replaced with a new one.

Lost Key

It can be a bit of a hassle to need to replace the motorcycle's key. However, there are different ways to have a new key made without wasting a lot of time or money.

One of the easiest ways to get a brand new key made is to visit an locksmith. They'll have the tools needed to cut a new key , and program it to work with your motorcycle. They will also be able to access all the blank keys for current and classic motorcycles.

Another alternative is to bring your key to an authorized dealer and have it cut for you. It may be more expensive than having the key cut at locksmiths but it will save you lots of money in the end.

A locksmith may have to take a photograph of the lock in the cylinder for the ignition key. This will allow them to identify what cuts and fills are required to make a key that fits your bicycle.

If you own transponder keys it could be somewhat more difficult to work with. The chip of the key must be connected to your motorcycle's computer. Some models have built-in immobilizers that block a key from working until the code is compatible.

Even if your bike doesn't come with immobilizers, it may be a problem if have lost the transponder key. If the chip is not in the correct position or is missing, some older models will not start.

It is possible to get your transponder key duplicated by the dealership or at a hardware store. However, this is not always the case. The cost for this service will be based on the model and the make of your motorcycle, however, it is recommended to have this done at least once, so that you can be prepared for the future.

Key fobs are a frequent type of key replacement for bikes, and it can be a very frustrating experience in the event that you lose one. It is important to keep an extra key at all times , because if you lose one, the motorcycle thinks that you are trying to take it and will not let you start the engine.

Ignition Cylinder Code

It can be a hassle to have your motorcycle key not fit in the ignition. However, it is usually caused by an issue with the key or ignition. If you're not sure what to do to fix it, you can have a locksmith take a look at it and determine what needs be fixed.

First, find the cylinder code of your motorcycle. This code is typically three to four numbers long and can be located somewhere on the silver shaft of your ignition cylinder. If you're unable find it, refer to your owner's manual, or ask a friend to help.

Another alternative is to take your motorcycle key to a local locksmith shop and get it duplicated. It's a simple, affordable way to get the new key. Bring your old key to the locksmith. They'll utilize a software program or lookup table to determine the cylinder code for your motorcycle.

The locksmith will then be able cut a duplicate version of your key based on the cylinder code that you've located. It may not be as excellent as the original, however, it's likely to work when you're looking to purchase an inexpensive key.

Once you have a second copy, you are able to then start your motorcycle. Your motorcycle's wheels remain locked until you unlock it using the ignition key.

Before purchasing a replacement ignition cylinder, be sure you read the manufacturer's description of it to make sure that it works with your motorcycle. You'll want to purchase one that is specific to your motorcycle and compatible with the rest of the components it has.

It is also important to look at the pricing to ensure that it's within your budget and won't end up being too costly. This is especially important in the event that your budget is tight or you're looking to replace the item as quickly as possible.

The final option is to replace entire ignition cylinder. This is a little longer-lasting, but it's usually is less expensive than trying to locate your cylinder's coding or locksmiths who can copy your motorcycle's key from the ignition cylinder. This method has one disadvantage that you'll have to wait for your key to arrive.

Padlock Key

Padlocks are detachable locks used in a variety of ways to guard against unauthorised use, theft, vandalism or damage. They comprise three components that include a shackle and body, as well as an locking mechanism.

The most common padlock part is the shackle. It is made from an aluminum loop that can be opened when locked. It could be square or round and could include a chain attached to it. The body is a solid piece metal that houses the lock's internals and holds the shackle.

motorcycle key programmer of modern keyed padlocks feature discs, tumblers, or cams that hold the shackle when you turn the key. A padlock from the past was activated with a screw which released a spring. This allowed the release of the shackle.

Depending on the style certain padlocks have a combination wheel to unlock them. These wheels can become blocked with debris and cause the padlock to become stuck. This can be solved by spraying the key with powdered graphite and placing the key in and out several times. This will cover the insides of the lock and make the key slide more easily.

Another issue that can prevent the padlock from working is corrosion. It occurs when iron bonds with oxygen and water to create flake of rust. This type of build-up is a concern when the padlock will be exposed to water, like in a garden where there is a sprinkler system or in sheds and garages where the doors are open frequently.


Cold weather can also cause padlocks to freeze which leads to the formation of ice within the housing that can impede the operation. It is possible to melt the ice by placing the lock in warm water. However, be sure that the lock is dry prior to heating it.

A damaged key is the most frequent reason why a padlock won’t open. It is likely that you won't be in a position to pull the key out of the lock without assistance from a professional. If you have a spare key you can either try to straighten it , or purchase a new one from locksmith.

Homepage: https://www.thekeylab.co.uk/motorcycle-bike-keys/