Notes

15 Best Duplicate Motorcycle Keys Bloggers You Must Follow
How to Get a New Motorcycle Key

It can be extremely frustrating and scary to lose a key to your motorcycle. If it's your only ride that you have, it could result in you being without transportation for several weeks.

Fortunately, you can find a new key to your motorcycle by using the ignition code for the cylinder. But, you will have to take the cylinder to a locksmith first.

Lost Key

You're not able to ride a motorcycle without a key, and it's no fun to lose it. It can be especially frustrating for riders who are trying to travel quickly and must start their bike.

Use a key ring that is secure to keep your keys safe. It will not break or break. If you're planning to travel long distances, ensure to carry a carabiner something similar so you can hook them on your pants belt loops at all times.

If you're struggling to locate your keys, look for them between the cushions of your sofa at home or in the bottom of your laundry basket. If you're at work or at work, search your desk or locker.

When you locate your key, take it down and take a clear image of the code on your phone so you can provide it to your local locksmith. The locksmith will need this code to request a new key for your bike.

The majority of manufacturers will provide you with a key code when you purchase your bike. This code is either stamped on the key or attached to an iron tab. It should be a four-digit code and will help you locate the ignition cylinder which is the silver shaft that runs between your speedometer and the tachometer.

In addition, many bikes are equipped with transponders that are electronically programmed to the ignition system. This means that even cutting a duplicate of your key will not make your bike start.

Many of these motorcycles will require new transponder to be reprogrammed. This can be expensive and time-consuming. This problem is avoided by having an extra.

Another alternative is to take the fob to a dealer and have it programmed by you. This is faster and less expensive than replacing an old metal key, however it's still a costly adventure.

You can have your vehicle's keyless ignition programmed by the dealer using your VIN number. This will not only save you the hassle of having a replacement key made but also reduce the cost of insurance since you won't have to pay for towing fees.

Broken Key

You'll need your motorcycle's key replaced as quickly as is possible after it is lost. The fastest method to obtain the new key is by calling a locksmith. A locksmith will be able to remove the damaged key, take the code from the ignition of your motorcycle and replace it with the new one.

Broken keys can be extremely annoying, but don't worry. Locksmiths can swiftly and cost-effectively fix the issue, and you'll be back on the road no matter how long it takes.

First, you need to examine the lock and determine whether it can be opened. Many pin tumbler locks have a plug that must be turned to the key pull position before it can be opened. It is crucial to place the plug correctly , otherwise the key will become stuck and it will be difficult to get it out.

There are a variety of ways to remove the key of a locked lock if it's stuck. Some of these methods work best using lubricant. Other methods will require pliers or other devices that have more gripping power.

To begin, you can employ a paperclip in order to gently extract the key. This works best with smaller paper clips since they provide more gripping power on the key. To grip the key from the bottom, you can make use of a tampon as well as similar objects.

Another option is to use an incredibly small screw to twist the key into the broken section. This will force the key's broken section to the outside, allowing you to push it outward.

To remove the damaged part of the key from the lock, make use of small saws or jigsaws. This is what I do every time.

Fast Keys Locksmith is the best locksmith for replacing your motorcycle keys. We are experts in mobile key replacement and repair for motorcycles. Within 30 minutes of receiving your call we'll be at your location.

Ignition Cylinder Code

Check your motorcycle's key to see if there are any indications of blockages. This could include dirt and corrosion that block the keyway. If you observe any obvious problems, a locksmith might be able help resolve the issue.

The most common reason why the key for a motorcycle won't fit into the ignition is because the cylinder keyway needs lubrication. Locksmiths recommend graphite or silicon powder for lubrication in the keyway to help your key slide into your ignition. They warn against WD40 or oil-based lubrication, though, because they attract dirt and grime, which could further block the keyway.

motorcycle key programmer that a motorcycle key isn't fitting into the ignition is that it's damaged or worn out. This could occur over time, and especially when you use your bike often.

It's a good idea for you to hire a professional make a new key when this occurs. Locksmiths are often equipped and know-how to create a new key from an ignition cylinder.


One way to be sure that a locksmith is competent in making a new key for your motorcycle is by making contact with them prior to the time and describing the issue. You'll be required to bring the whole ignition cylinder with you. It is best to call ahead and ask whether they're competent to disassemble it and create your keys from it.

Certain locksmiths can do this, but some may not. To find the best locksmith, you'll have to conduct some research.

It's important that you know that this isn't the best option if you don't have the time to wait for a replacement key from your dealer. It's also more expensive than some other options.

If the key to your motorcycle's cylinder isn't working, try checking it by using a flashlight and looking for obvious obstructions. You'll need to look for dirt, corrosion, and any metal shavings or debris.

Many old motorcycles do not have keys. You can share the code with locksmiths in order to get a new key. The cylinder code is typically comprised of a three or four-digit code printed on the ignition switch or attached to the metal tab on the key.

Unrecognizable code

A key code is typically included with new motorcycles. This key code is usually found on an aluminum tab that is that is attached to the keychain. This is a great place to record the key code in case you lose the key and can be used by locksmiths to create an entirely new key.

Some bikes, such as Harley-Davidsons, use onboard diagnostics to communicate with their owners when they experience issues. The codes that are displayed on the dash indicate what fault code has to be fixed. They are also useful for identifying the source of the problem that needs to be resolved using a diagnostic tool.

Some motorcycles don't have these codes. This is due to the fact that they were manufactured in the absence of a bike with a key code or the code was printed on the lock and has been corroded over time.

This isn't an issue but it can be a hassle. This can be prevented by keeping your keys in a safe area and teaching others not to take them.

The other option is to get a locksmith to cut you new keys. A look-up table is available at your local locksmith to help you locate the key code and the cylinder codes for your motorcycle. This is the fastest and most cost-effective method to replace your key.

To do this, disconnect your ignition cylinder , then bring it to the locksmith. They will be able to see where the cuts and files need to be made to create an appropriate key for your motorcycle.

You can also identify the code on the cylinder by removing your ignition key out of the cylinder, then loosening it a little. The code is usually three to four digits long and can be read by all bikes. However, you might require turning the cylinder or loosen it to detect it.

If you have any questions or require a locksmith for other repairs, please contact us. We offer a variety of services including lock and key services at reasonable prices.

Here's my website: https://www.thekeylab.co.uk/motorcycle-bike-keys/