Notes

20 Myths About Duplicate Motorcycle Keys: Dispelled
How to Get a New Motorcycle Key

Losing your motorcycle's key is a terribly frustrating and terrifying situation. It can also leave you stranded and without transportation for weeks if this is your only ride.

You can usually obtain a new motorcycle key using the ignition code. However, you'll have to take your cylinder to be brought to locksmith.

Lost Key

The key you carry is vital when riding a motorcycle. It can be extremely frustrating to lose it. Riders who have to speedily start their bikes could find it frustrating.

Use a secure key ring to keep your keys safe. It will not break or fall apart. Also, if you're traveling long distances, ensure to carry a carabiner or similar item to attach them to the belt loops of your pants at all times.

If you have difficulty finding your keys, look for them under your cushions on your sofa at home, or under your laundry basket. If you're at work, look in your locker or desk.

When you locate your key, note it down and take a clear image of the code on your smartphone so that you can share it with your local locksmith. The locksmith will need the code to purchase an extra key for your bike.

Many manufacturers will provide you with a key code when you purchase a bike. The number is either engraved on the key or attached to an iron tab. motorbike key replacement is a four-digit number and will assist you in locating the ignition cylinder which is the silver shaft between your speedometer and the tachometer.

The majority of bikes come with an electronic transponder that is programmed to the ignition system. This means that even a duplicate key might not cause your bike to start.

A lot of these bikes require a new transponder keys to be reprogrammed. This can be very expensive and time-consuming. The best method to avoid this issue is to carry an extra.

Another alternative is to take the fob to an authorized dealer and have it programmed by you. While this is faster and more affordable than replacing a conventional key, it could be expensive.

It is possible to have your motorcycle's keyless ignition programmed by the dealer using your VIN. This will help you save time and reduce your insurance cost. There will be no towing costs.

Broken Key

You'll need your motorcycle's key replaced as quickly as is possible when it's lost. Locksmiths are the most efficient method to obtain a replacement key. A locksmith will be able to remove the damaged key, take the code from the ignition of your motorcycle and replace it with the new one.

A broken key can be a very difficult circumstance, but you shouldn't get stressed. A locksmith can quickly and easily solve your issue and you will be back on the road in no time, regardless of how long it takes.

The first thing you must take is to examine the lock to see whether it is able to be removed. Pin tumbler locks often contain a plug that has to be rotated to the key pull position in order to open. If the plug isn't in this position, it will trap the key, making it more difficult to remove it.

If the key is stuck in the lock, you can explore a variety of ways to extract it. Some of these methods require lubricant while others require pliers or something else that has more gripping power.

To begin, employ a paperclip in order to gently remove the key. You can also use smaller paper clips to get more grip on the key. You can also employ a tampon, or a similar object that you can put into the lock to secure the key from the bottom.

Another option is to locate the screw that is small and twist it into the broken section of the key. This will force the damaged section of the key to the outside and let you push it outward.

You can even make use of a small saw to cut the damaged section of the key out of the lock. This works for me every time.

Fast Keys Locksmith is the best locksmith for replacing your motorcycle keys. We are experts in mobile key replacement and repair for motorcycles. We'll be at your place within 30 minutes from the time you call us.

Ignition Cylinder Code

If the key for your motorcycle doesn't fit in the ignition cylinder to start your bike, check it carefully for indications of obstructions. This could be due dirt or corrosion blocking the keyway. A locksmith might be able to assist you in the event that you discover any obvious issues.

A common reason that keys from motorcycles won't fit into the ignition is because the keyway on the cylinder needs to be lubricated. To help your key slide into your ignition, locksmiths suggest silicon or graphite powder lubrication. However, they warn against using WD40 or oil-based lubricants for the key path as they attract dirt and grime which could further block your keyway.

Another reason why a motorbike key isn't fitting into the ignition is because it's worn or damaged. This can happen over time, especially when you are on your motorcycle frequently.


When this occurs it's best to get a brand new key made by an experienced locksmith. Locksmiths have the skills and knowledge to make a new key from an ignition cylinder.

One method to make sure locksmiths are capable of creating a brand new key for your motorcycle is contacting them ahead of time and describing the situation. You'll be required to bring the whole ignition cylinder to them. It is best to call ahead to ask them if they're capable of dismantling the cylinder and make you keys from it.

Some locksmiths are capable of doing this, while others may not be competent to do so. To locate the best locksmith, you will need to do some research.

This option isn't ideal if you don’t have the patience or time to wait for an answer from your dealer. It's also more expensive than some other alternatives.

Try checking the key cylinder of your motorcycle with an LED to see whether it's not turning on. You'll want to look for corrosion and dirt, and also metal shavings or other debris that could be in the keyway.

A lot of old motorbikes do not come with keys, so you can share the cylinder code with a locksmith in order to create the new one. The cylinder code is usually a three or four-digit code that's printed on the cylinder of the ignition switch or affixed to the metal tab of the key.

Unrecognizable Code

A key code is typically included with new motorcycles. The key code is usually found on a small metal tab attached to the chain. This is a great place to record the key code in case you lose the key and can be utilized by a locksmith to create an original key.

Certain bikes, such as Harley-Davidsons, have onboard diagnostics installed to notify their owners when they experience problems. The codes on the dash will indicate the fault code that needs to be addressed. They can also be used to identify a trouble code that can easily be cleared with the aid of a diagnostic tool.

Certain motorcycles don't have these codes. The codes are usually absent because the motorcycle was not sold with a key code, or because the code was printed on a lock that has become rusty over time.

This isn't a major issue however it can cause frustration. A good way to prevent this from happening is to place your keys in a safe spot and train others not to take them when they're not in a safe place.

You can also request an locksmith to create an entirely new key. A look-up table is available at the local locksmith shop to assist you in finding the key code and the cylinder codes of your motorcycle. This is the quickest and most cost-effective way to replace your key.

To accomplish this, you will need to unhook your ignition cylinder and brought to the locksmith. They will then be able to determine where the cuts and files have to be made in order to make a new key that fits your motorcycle.

You can also figure out the code for the cylinder yourself by taking your key from the ignition barrel and loosening it a little. The code is typically three to four digits long and is able to be read by most motorcycles. However, you might require turning the cylinder or loosen it to be able to read it.

If you have any concerns or are in need of a locksmith for other repairs we can help you. Contact us. We offer a full range of services including lock and key services at reasonable prices.

Website: https://www.thekeylab.co.uk/motorcycle-bike-keys/