Notes

Where Do You Think Duplicate Motorcycle Keys Be One Year From Today?
How to Get a New Motorcycle Key

The loss of a motorcycle's key can be an incredibly frustrating and frightening situation. It can also leave you stranded and without transportation for weeks if it's your only ride.

You can usually get a new motorcycle key using the ignition code. But, you will need to take your key to a locksmith before you can get it.

Lost Key

You can't ride a motorcycle without your key, and it's certainly not fun to lose it. Riders who have to speedily start their bikes could find it frustrating.

To ensure your keys are secure, you should use a key ring that doesn't break or fall apart. If you're planning to travel long distances, be sure to have a carabiner, or something similar in order to fix them to your pants belt loops.

If you have difficulty finding your keys, try searching for them between your couch cushions at home, or under your laundry basket. If you're at work, check your locker or desk.

If you locate your key, note it down and take a clear picture of the code on your smartphone so that you can provide it to your local locksmith. The locksmith will require this code to order a new key for your bike.

Many manufacturers will give you an identification code when you purchase a bike. This code is stamped on the key or on a metal tab attached to the key. It must be a four-digit code that will allow you to locate the ignition cylinder, which is the silver shaft that runs between your speedometer and the tachometer.

A large majority of bikes come with an electronic transponder that is programmed to the ignition system. This means that even cutting an exact duplicate of your key will not make your bike start.

A lot of these bikes require a new transponder to be reprogrammed. This can be very expensive and time-consuming. The best method to avoid this hassle is to have an extra.

Another option is to go to an auto dealer and let them program a new fob for you. motorcycle keys will be quicker and less expensive than replacing an old metal key, however it can still be a costly adventure.

If your motorcycle has an ignition with a keyless lock it is possible to have the dealer create a replacement key using your VIN number. This will speed up the process and reduce your insurance costs. You won't pay any towing costs.

Broken Key

If you've lost your motorcycle key You want it replaced as fast as you can. The fastest method to obtain a new key is by calling an locksmith. A locksmith who is certified has the tools to get rid of the broken key, locate the code from your car's ignition and replace it with a brand new key.


A broken key can be a very painful circumstance, but you shouldn't get stressed. Locksmiths will quickly and inexpensively solve the issue, and you'll be back on the road no time, regardless of how long it takes.

The first thing you must do is look over the lock to determine if it can be removed. Pin tumbler locks often contain a plug that has to be rotated to the key pull position to open. If the plug isn't in this position, it could trap the key and make it more difficult to remove it.

If the key is stuck in the lock, you can test a variety of strategies to extract it. Some of these methods work best using lubricant. Other methods will require pliers or other devices that have more griping power.

To start with you can try using a paper clip to gently extract the key. This works best with smaller paper clips, as they provide an even better grip on the key. motorcycle key repair could also make use of a tampon or similar objects that you could insert into the lock to hold the key from the bottom.

Another alternative is to make use of an incredibly small screw to twist the key into the broken section. This should force the broken section of the key to the outside and let you push it outward.

You can even use a small jigsaw to cut the damaged section of the key out of the lock. This works for me every time.

Fast Keys Locksmith is the most reliable locksmith for the replacement of your motorcycle key. We are experts in mobile key repair and replacement for motorcycles. Within 30 minutes of your phone call, we can be at you location.

Ignition Cylinder Code

Check your motorcycle's key for any signs of blockages. This could include dirt and corrosion that obstructs the keyway. A locksmith might be able assist when you notice any obvious issues.

The cylinder's keyway must be lubricated to keep the motorcycle key from squeezing in the ignition. To make your key slide into your ignition, locksmiths recommend graphite or silicon powder lubrication. They warn against WD40 or oil-based lubrication, though, because they attract dirt and grime that could further block the keyway.

A worn-out or damaged key for your motorcycle could cause it to not fit into the ignition. motorcycle keys can be the case over time, especially if you ride your motorcycle a lot.

When this occurs, it's a good idea to get a new lock made by an experienced locksmith. Many locksmiths have the tools and expertise to make a key from an existing ignition cylinder.

It is recommended to call an locksmith ahead of time and discuss the situation. You'll require the entire ignition cylinder to them. It is best to call ahead and inquire whether they're competent to disassemble it and make you keys from it.

Certain locksmiths are capable doing this, whereas others might not be able to. You'll need to conduct some research to find the best locksmith.

This option isn't ideal for those who don't have the time or patience to wait for an answer from your dealer. It's also more expensive than other options.

Try checking the key cylinder on your motorcycle with a flashlight to see whether it's not turning on. You'll need to look for dirt, corrosion, and any metal shavings or other debris.

A lot of old motorcycles don't have keys, so you need to share the cylinder code with a locksmith in order to create a new one. The cylinder code is typically an eight-digit or three-digit code printed on the ignition switch or attached to the metal tab on the key.

Unrecognizable code

If you have a new motorbike, the manufacturer usually ships it with a key code that is on a little metal tab that is attached to the key chain. It is a convenient place to record the key code prior to when you lose the key . It can be used by locksmiths to make an original key.

Certain motorcycles, like Harley-Davidsons, use onboard diagnostics to notify their owners when they encounter issues. The codes displayed on the dash show which fault code must be fixed. They are also useful for identifying a trouble code that can be cleared by the aid of a diagnostic tool.

Some motorcycles don't have these codes. These codes are typically absent because the motorcycle was not sold with a key code or because the code was printed on a lock that has become rusty over time.

It's not a huge problem, but it can still cause frustration. It can be avoided by keeping your keys in a secure place and instructing others not to take them.

The other option is to get locksmiths to cut you an additional key. Your local locksmith should have a look up table they can use to look up the key code and cylinder code for your motorcycle. This is the quickest and most cost-effective method to replace your key.

To do this, remove your ignition cylinder and take it to the locksmith. The locksmith will then be able see the areas where cuts and files need to be made in order to make a new key that fits your bike.

You can also identify the code on the cylinder by removing your ignition key out of the cylinder and loosening it a little. Most bikes have a three - or four digit code on the side of the cylinder that is readable, but you may need to turn or loosen the cylinder in order to read it.

We are here to assist you with any questions or repairs. We offer a full range of services, including lock and key services, at competitive rates.

Website: https://ctxt.io/2/AACQ3CyDFA