Notes

A Brief History Of Duplicate Motorcycle Keys History Of Duplicate Motorcycle Keys
How to Get a New Motorcycle Key

The loss of a motorcycle's key could be a terrifying and frightening scenario. If it's your only ride, it can make you without transportation for a few weeks.

You can usually obtain an entirely new motorcycle key using the ignition code. But, you'll need your cylinder to be taken to locksmith.

Lost Key

You can't ride a motorcycle without your key, and it's no fun to lose it. It can be a real hassle for those who are trying to get their bike to a location quickly and are required to start their bike.

To ensure your keys are safe, use a secure key ring that won't fall apart or break. Also, if traveling motorcycle key repair , be sure you carry a carabiner, or similar item to attach them to your belt loops on your pants at all times.

If you're struggling to locate your keys, look for them in places like between the sofa cushions at home or at the bottom of your laundry basket. Look at your locker or desk when you're working.

When you find your key, take it down and take a clear image of the code on your phone so you can give it to your local locksmith. The locksmith will need this code to order an additional key for your bike.

Many manufacturers will give you an access code for your key when you purchase your bike. The code is either on the key itself or on a tab made of metal that is attached to the key. It should be a four-digit code and will help you locate the ignition cylinder which is the silver shaft between your speedometer and the tachometer.

A large majority of bikes come with an electronic transponder that is programmed to the ignition system. This means that even a duplicate key might not get your bike started.

Many of these motorcycles require a new transponder keys to be reset. This can be expensive and time-consuming. This issue can be avoided by having an extra.

Another option is to take your fob to an expert dealer and have it programmed for you. This is quicker and cheaper than replacing a conventional metal key, however it's expensive.

You can get your motorcycle's keyless ignition programmed by the dealer using your VIN number. This will save you time and reduce your insurance cost. You won't pay any towing fees.

Broken Key

If you have lost your motorcycle key You want it replaced as fast as possible. Locksmiths are the most efficient method to obtain a replacement key. A locksmith can remove the damaged keys, and extract the code from the ignition of your motorcycle, and then replace it with a brand new one.


Broken keys can be very difficult, but don't get too worried. A locksmith can provide an affordable, quick solution to your issue, and you'll be back on the road in the shortest amount of time.

The first step is to inspect the lock and determine if it's able to be removed. Most pin tumbler locks have the plug which must be turned to the key pull position before it can be opened. If the plug is not in this position, it could trap the key, making it harder to get rid of it.

If the key is stuck inside the lock, you can try a variety of methods to free it. Some of these methods work better using lubricant. Other methods will require pliers or a device with more griping power.

To begin you can use a paper clip to gently extract the key. This works best with smaller paper clips, as they will give you more gripping power on the key. To grip the key from the bottom, you can make use of a tampon or similar objects.

Another option is to locate the screw that is small and twist it into the broken part of the key. This will force the broken section of the key to the outside, allowing you to push it outward.

You can even make use of a small jig saw to cut the broken portion of the key out of the lock. This is what I do every time.

Fast Keys Locksmith is the most reliable locksmith for replacing your motorcycle keys . We are experts in mobile key repair and replacement for motorcycles. Within 30 minutes of your call we'll be at your place.

Ignition Cylinder Code

If your key for your motorcycle does not fit into the ignition cylinder to start your bike, examine it carefully for signs of blockages. This could be due corrosion or dirt blocking the keyway. If you observe any obvious problems an expert locksmith may be able help resolve the problem.

The keyway of the cylinder must be lubricated to prevent keys from sticking in the ignition. To allow your key to slide into your ignition, locksmiths suggest graphite or silicon powder lubrication. They advise against WD40 or oil-based lubrication however, since they attract dirt and grime, which can further clog up the keyway.

A broken or worn-out key for your motorcycle could cause it to not fit into the ignition. This occurs over time, and is more common when you are using your motorcycle often.

In the event of this happening it's best to get a brand new key made by an expert. Locksmiths have the tools and expertise to make a new key from an ignition cylinder.

One way to be sure that a locksmith is capable of creating a brand new key for your motorcycle is by calling them in advance and describing the situation. You will require the entire ignition cylinder along with you. It is best to call ahead and ask them if they're able to take it apart and create keys from it.

Certain locksmiths are able to do this, but some may not. You'll have to do some research before you choose the best locksmith for you.

This option is not ideal for those who don't have the patience or time to wait for an answer from your dealer. It's also more expensive than other alternatives.

Check the key cylinder of your motorcycle with flashlight to determine the possibility of it not turning on. You will need to check for corrosion, dirt, and any metal shavings or other debris.

A lot of old motorcycles don't come with keys, so you need to share the key cylinder code with a locksmith to create an entirely new one. The cylinder code is usually an a 3-digit or 4-digit code that is printed on the cylinder for the ignition switch or attached to the tabs of the key made of metal.

Unrecognizable code

If you own a brand new motorbike, the maker typically ships it with an identification code for the key that is attached to a small metal tab attached to the key chain. This is a great spot to keep the key number handy in the event that you lose it. It is also used by locksmiths to make a new key.

Certain bikes, like Harley-Davidson's utilize onboard diagnostics to communicate with the owner when they experience a fault. The codes displayed on the dash will indicate which fault code is required to be fixed. They can also help in identifying a trouble code that can be cleared using an instrument to diagnose the problem.

Some motorcycles aren't equipped with these codes. This is due to the fact that they were manufactured in the absence of a bike with a key code, or because the code was printed on the lock and has rusted with time.

Although this is not an issue but it can be quite frustrating. It can be avoided by keeping your keys in a secure place and training others not to take them.

The second option is to ask an locksmith to cut you new keys. The locksmith you choose is likely to have a look up table that they could use to look up the key code and the cylinder number for your motorcycle. This is the simplest and cheapest way to obtain a replacement key.

To do this, unhook the cylinder of your ignition and bring it to the locksmith. The locksmith will then be able discern the areas where cuts and files need to be made in order to create an appropriate key for your bike.

You can also try to find the cylinder code yourself by taking your key out of the ignition barrel and loosening it a little. Most bikes have a three - or four digit code on the side of the cylinder. It is visible, however, you may have to twist or loosen the cylinder to read it.

We are available to help you with any questions or repairs. We provide a wide range of services including lock and key services at reasonable prices.

Website: https://ctxt.io/2/AACQQpW9Eg