Notes

10 Motorbike Key Replacement Meetups You Should Attend
What to Do When You Lose a Motorbike Key

If you lose a motorcycle key, it could be an incredibly frustrating situation. It can be incredibly frustrating to lose your key for your motorbike and then be without a vehicle for a few weeks.

There are a variety of ways to obtain a new key for your motorcycle. Many of them are relatively affordable and quick, but some of them require a trip to the dealership.

1. Unhook the Ignition Cylinder

The ignition cylinder plays a vital component of the engine. Motorbikes can be troubled to start if the cylinder is damaged. The cylinder contains many wires and key elements that help the ignition work. You will need to replace the cylinder if it's not working properly.

First, unhook the ignition key cylinder from your motorcycle. This is a simple job that can be performed by anyone with the right tools and experience.

To unhook your ignition cylinder, you'll need to remove the upper triple clamp. This is an easy process that involves removing both the handlebar halves and the upper triple clamp from each of the fork tubes.

After you have removed the handlebar halves, you can make use of a 22mm socket for loosening the pivot bolt. This bolt is a large one that holds the upper triple clamp to the bike. To remove the bullet connector from your top triple clamp you'll need to remove it.

To avoid any damage, you will need to work in a clean and safe area. It is best to lay an unclean towel or sheet on the floor to protect your body and help you see what you are doing.

It is a good idea after removing the upper triple-clamp to measure the positions of the bars and the fork tube in the triple clamp. This will allow you to return them in the same manner once the new triple clamp has been installed. This can make it easier to place the bars and fork tubes back in their proper positions even if you didn't take the proper steps when you first installed the upper triple clamp.

Next, you need to disconnect the ignition switch from the wiring harness. You will need to unplug the bullet connector and then disconnect the plug that is large.

If you decide to take this step, make sure to remove the fairing cap from your motorcycle and ensure it is off before you begin. This gives you more room to work in.

2. Take the Key Code to a Locksmith

A key code is a string of numbers and letters that define the features of locks. Locksmiths use key codes for making new keys as well as to fix or replace locks.

They are usually composed of a mix of digits and numbers, however, they may also include letters. These numbers are needed to ensure that the locksmith creates locks that work for you.

In the majority of instances locksmiths have access a wide variety of key codes that can be used to make new keys. Some locksmiths use computers to convert the codes into new keys. Some locksmiths prefer large reference books to determine which code they must use to cut new keys.

There are two kinds of key codes that locksmiths use to create new keys. The first is a blind code which describes the specifications of the lock using a combination of digits and numbers. The second type is direct digit codes which contains numbers that directly show the measurements of the lock as well as the cutting patterns.

Locksmiths can either scan the code with small cameras or other tools to see the cuts or use a code cutter. This allows locksmiths to cut a new key from the code. Both methods of conversion of a key code result in an entirely new key that works inside your lock.

Before they can begin a cutting process for a code, locksmiths might need to make impressions of the lock or detach it. This can be time consuming and requires some skill, but it can be accomplished with practice.


Prior to arriving at the location the most skilled locksmiths will be able to evaluate the needs of the customer. They will then determine the method that will be most effective for them.

If the customer is having a difficult understanding the code of their lock the locksmith can use impressioning to determine the location of the pins inside the lock cylinder. They then mark a blank key with these locations, which could take between 10 and 15 minutes once they've learned the method.

3. Bring the Key to a dealer

The loss of a motorbike key can be an expensive hassle. You might have to pay for a flatbed or an Uber, or buy an additional key from the dealer. But losing a key does not need to mean the end of your bike's life, and there are ways to protect yourself and your vehicle if it occurs.

Keep one in a secure compartment on your bike or hand it to a family member in the event that you lose the original. This will enable you to have a spare in the event of a breakdown or theft.

A Bluetooth key finder is also available. It will alert you when your keys are close by, so you don't have to worry about it if it gets lost or stolen. This can help you avoid losing your keys in the first place, so make sure you invest in one of these devices if you're someone who loses things frequently.

Another option is to contact your bike manufacturer and request a copy its key code. This is often written on the key or on a metal tab that is attached to the key. new motorcycle keys is the fastest way to get a replacement key made and delivered to your home.

It's an excellent idea to have your VIN (vehicle identification number) written down to take it with you when calling the dealer. To cut keys for you, some dealers will require this information. They may also ask for proof of ownership.

The right key can also save you money in the long run since it can cut down the cost of getting your bike repaired or fixed. Many manufacturers provide keyless systems that are more convenient for those who do not have traditional locks on their bikes.

If you're someone who can't remember where you put your keys, think about placing them in a waterproof container or inside your coat or jacket pocket. This will help you locate your keys and will keep your bike safe while you wait to get an replacement.

4. Lock the door

There are a number of simple ways to get the key to your motorbike. These methods aren't guaranteed but they can save you time and money by allowing you continue to use your bike in the event that you need to hire locksmith.

First, look over the lock to ensure it's not broken or jammed. To clean any dirt or debris, spray the lock with WD-40. After the WD-40 has dried you can try putting your key back into the lock to test if it works.

Another possibility is that the discs in the lock are not aligned properly. This could cause the key to not to rotate completely. To open the nuts, gently turn them with the screwdriver.

The next step is to unlock the lock by using a tool called lock picking. This is a common method to unlock expensive locks. However, it can also be used to unlock cheaper locks. This method is most effective when you know the lock well and are careful when picking it.

A Bic pen is an excellent option for this. It can be used with U locks and even to unhook the tubular lock's cylinder.

Another option is to create the shim from an empty coke can. This will let you take off the bar end joint wedge bolt. This is particularly useful for locks that are located in the lower part of the handlebars. This allows you to remove the handles with ease.

If the shim technique doesn't work, you can try cutting the lock open using the blade. This old-fashioned and destructive method can sometimes work however it can cause damage to your bike.

Protective gear is necessary to avoid this. When working with sharp metals like a shimor a shim, safety glasses and gloves are crucial.

If none of these techniques have worked, it's time to call a professional. A good locksmith will be able to help you get your bike back into good working order by assisting you to unlock the lock without damaging it.

Read More: https://www.thekeylab.co.uk/motorcycle-bike-keys/