Notes

The way to Replace Your GE Oven`s Temperature control system for More Even Cooking
Without an operating thermostat, your oven won`t be able to warm evenly. Depending about the damage, the particular appliance`s fan might not change on or away from. If you want to affect the part yourself, order a replacement part #WBK20K10004 for GE model ovens and stick to this procedure:

Unplug the oven.
Each appliance repair should start with you unplugging the appliance. Because this repair involves directly manipulating electrical components, you need to be able to make sure the power is totally disconnected before having started.

Remove the temperature setting knob and the rear upper access screen.
Locate repair oven thermostat for the front access panel. Move the knob covering up free from the shaft. Then take the oven away from wall. Unscrew the main rear access panel and set it aside.

Uninstall the thermostat assembly.
Identify the boxy exterior in the thermostat set up. It usually provides an X form on the backside. Next, uninstall typically the mounting screws for the front access -panel that were hidden under the thermostat control. Then remove the particular wires attached to typically the part. Because there are various wire connections, take an image of the orientations before you remove any kind of. This can give a person an easy guideline when you install the modern part.
The particular thermostat includes a temperature sensing light that runs straight down the back of the dryer and into the oven alone. Release it coming from the retaining videos at the rear of the stove interior and bond it up in order to the back from the appliance. Set the complete thermostat aside.

Install the new element.
Unlike most installation procedures, don` t reassemble the range in backward buy. First, secure the particular box in the temperature setting assembly directly to the backside associated with the oven by simply tightening the front-facing screws under the knob. Once the particular part is tightly in place, connect the wires. Use your picture as a facts ensure everything will be connected correctly.

Up coming, thread the realizing bulb down by means of the back side of the oven and directly into the interior. Clip it to the particular rear wall beneath the element.

Reassemble the oven.
Go the rear panel into position and ensure the bottom clips will be in place. In that case affect the screws along the panel` s edge. Proceed to the front of the appliance and drive the knob back into position.

Website: https://park-slope-oven-repair.com