Notes

biomass pellet making machine
Unstable current of the biomass pellet making device


The ring die and journalism roller of the biomass pellet making machine rotate at a constant rate, as well as the working state of each immediate is basically the exact same. If the quantity of feed product is unchanged, the power usage need to additionally be relatively stable, and the current will certainly be reflected on the electric motor. Also relatively secure.

When the biomass pellet making machine equipment is working, we adjust the feeding amount as long as the material thickness in the feeding area is less than the optimum beginning factor of the pressing area, it will straight impact the length of the reliable working area of journalism area as well as the pressing location, and cause the existing to stream.

The change as well as the adjustment of the hourly outcome of the biomass pellet making equipment, and if the density of the material layer in the feeding area is greater than the maximum beginning factor of journalism area, along with boosting the density of the material layer in the feeding area, it will not affect the hourly output and energy intake per unit time.

If there is any kind of impact, it will no longer create adjustments in current as well as biomass pellet making machine outcome. Because the density of the material layer in the feeding zone exceeds the optimum starting point of the pressing area, the period in between journalism area as well as the pressing zone is constant with no modification. In the interval where the multi-feed material lies, the clamping angle is higher than the crucial rubbing angle, and the product will certainly not be pressed into journalism location.

In this way, with the boost of the feeding quantity of the biomass pellet making maker, the balance of in and out is broken, and also the in is higher than the out, and also the product layer in the feeding area is It will gather thicker and also thicker till all the voids are filled and blocked to the feed port, so that the biomass pellet equipment can not function normally. Currently, the current will boost.

In the actual job of the biomass pellet making machine, with the modification of the feeding quantity, the instant result and also the current of the major electric motor will certainly alter as necessary. And also when the feeding density does not go beyond the maximum starting factor of journalism area, it will not cause a growing number of worldly layers in the feeding location due to the increase in the amount of powder we feed.

As has actually been claimed prior to, the location that can trigger instant result and power usage modifications need to be both areas of work and material layers - the compression area and also the biomass pellet maker extrusion location, so we think that the 3rd area stated over- - The practical presence of the feeding location has certain problems.

That is to say, the fed material layer is distributed in the compaction location, the extrusion location and also the feeding location whose complete thickness does not surpass the optimum entry factor of the compaction location.

The biomass pellet making equipment will certainly function normally under the allowed power. If the amount is also large and goes beyond the density of the maximum beginning point of the compaction area, the material layer will certainly gather and slowly rise, and also the biomass pellet making maker will not function normally. my latest blog post is changing.

Through the above analysis, let's review some phenomena exhibited by the biomass pellet making equipment under two feasible working problems:

( 1 )When the power of the main electric motor is not large sufficient compared to the matching biomass pellet making maker granulation parameters, the thickness of our feed is at the end of the extrusion zone and the optimum access point of the compression area (this will certainly differ with the raw materials, compression ratio, effective length-diameter proportion, humidity, pressure rollers as well as various other variable factors to change appropriately), typically will not surpass the optimum beginning factor, with the boost of the feeding amount, the compression location will transform as necessary.


The length of the period will certainly be shortened, and the interval size of the capture area will slowly boost as necessary, and also the current of the primary motor will also progressively enhance till it gets to the maximum allowed use. If the existing gets to the security worth we set, and the thickness of the feeding product has actually not surpassed the density of the maximum starting point of the biomass pellet equipment pressing location, if the feeding quantity is enhanced, the safety system will certainly act, and also the excess powder will be discharged. In order to ensure the normal function of biomass pellets.

( 2 ) Intend the power of the main electric motor is huge or the electric motor falls short to overload after the thickness of the feeding material surpasses the density of the maximum beginning factor of journalism location as a result of the comprehensive changes of many variables. At this time, the powder fed to the people can not enhance the time outcome, nor will it trigger the boost of the primary electric motor existing, however can just continue to enhance the powder pile accumulated in the machine up until the internal cavity of the biomass pellet press equipment is obstructed.

Cause the biomass pellet making device to not work appropriately. Obviously, this unique phenomenon seldom takes place in real production (if the raw product moisture is as well huge, the efficient element proportion is also little, the pressure roller is drastically put on as well as the void is not readjusted appropriately, the raw product is replaced, and so on, this sensation might happen), this is our undesirable problems.

Comprehensive evaluation of the initial generally made use of functioning state, it is easy to know that on the property that the appropriate problems are unchanged, with the adjustment of the feeding quantity, the interval size of the compression area as well as the extrusion area is within a specific variety Matching changes are additionally made (the feed circulation price is lowered, the size of the extrusion area is reduced, and also the length of the compression area is lengthened; otherwise, the extrusion area is expanded and the compression zone is reduced), as well as the feeding amount does not go beyond the stress. When the poultry pellet making machine of the maximum starting factor of the limited area is concerned, the lengths of the above two intervals are not a constant value when this article is written. The larger the extrusion zone length value, the higher the biomass pellet maker production efficiency and the longer the pellet length per extrusion per roller.


Therefore, it is concluded that the factors of current instability under the condition of controlling the feeding amount need to be investigated from the moisture content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, and the raw materials are replaced.

RICHI MACHINERY has been established for more than 25 years, specializing in biomass pellet making machine for sale, the development and production of single/complete pellet production lines such as animal feed, biomass fuel, wood waste, grass, straw, organic fertilizer, etc, and provide design and services for EPC/Turnkey projects!


My Website: https://www.easyfie.com/read-blog/2409354_animal-feed-pellet-plant-design-functionality-technology-and-also-uses