Notes

DTG Printing for Branding

An enjoyable task you can tackle with your DTG is to brand your very own line of tee shirts. Eliminating the existing label and also printing your own custom logo design or your consumer's logo design in its place can provide tee shirts that special touch.

Initially, you will certainly need to develop a "riser" platen to print inside the shirt (Number 1). A simple 2.25- to 2.5-inch square of thick cardboard or plastic will suffice. We made use of a 3/16-inch thick piece of plastic for our riser and taped it to the top of our platen in the center from side-to-side. This made lining up the art work a lot easier.

Figure 1

We developed our tag and positioned it in the print software in the same position on the platen as the riser (Figure 2). Because Houston embroidery service placed the riser at the top edge of the platen, we placed the artwork within that same square area. To make it much easier, make the art work smaller than the riser. This will certainly enable room for mistake in positioning of the t-shirt and artwork.

Figure 2

You can easily check the positioning of your riser and also art work by putting a paper onto the riser and running a test print. If your photo prints off of the riser, readjust appropriately. You do not want your tag accidentally printing onto the collar of your shirt.

Next, we removed the tag and also heat pushed the tee shirt flat (Figure 3). After that we loaded the t-shirt by laying it on top of the platen as well as in position on top of our "riser." We saw to it that any other tags and the collar were below the top of the t-shirt remaining on the riser. It is necessary to remove any kind of opportunity of a tag or bump in the fabric to come right into contact with the print head throughout printing.

<img width="434" src="https://images.app.goo.gl/KQnpYzdNWmzAEu3V8" />

<iframe src="https://youtu.be/jU6r_R6tty0" width="560" height="315" frameborder="0" allowfullscreen=""></iframe>

Number 3

Once the print was done, we eliminated the tee shirt as well as heat healed the inks, ensuring to not use excessive pressure which the t-shirt was still flat. Warmth pushing creases into the textile will certainly lead to unpleasant folds and also make it more difficult if you need to do any added printing.

Making use of risers also can make it a lot easier to do other types of prints. As an example, you can place your riser on the left side of the platen at regarding pocket height. You can then load a pocket shirt to ensure that the pocket exists simply below the riser. utilizing the top of the pocket sitting just off and listed below the riser. This will certainly permit you to easily print just over the pocket on a shirt, with perfect placement each time.



Here's my website: https://houstonembroideryservice.com/