Notes

5 Types Steel Rod Cutting Machines, At Least One You Haven't Seen
5 Types Steel Rod Cutting Machines: At Least One You Haven't Seen
Steel pole cutting is a very crucial action at a construction site. Steel poles, when made, are long in length and require reducing. These steel rods can be of any type of kind like iron rods, pipes, or carbide poles.
For this function, different sorts of steel pole cutting machines are used. Choosing the ideal equipment for this step is more vital than the real process.
This is since time, expense, performance, size, mobility, and also power are all various factors on which this decision is based upon. When buying a cutting device, one must constantly keep these elements in mind
Choosing the best rod cutting maker will certainly make your work at the building site very easy. It will certainly offer more advantages to you in the future than disadvantages. An ideal steel reducing equipment will certainly cut your poles faster, much easier, in mass, and also cut numerous sorts of metals.
You might have come across the usual kinds of cutting makers made use of at building and construction sites. For instance, miter saw, hydraulic cutting equipment, angle grinder, circular saw, as well as torch.
But in addition to these typical devices, there are some makers which are less recognized however verify to be very helpful.
We will mention the less-known equipments as well as discuss their advantages and disadvantages in our short article.
Guidebook Rod Cutter
Our listing starts with one of the most basic of the devices. It is a little and also well dimensioned device.
The device exerts pressure directly on the rod to generate shear as well as damage it. The moving component holding the blade is accurately assisted in between the plate of the body.
This concept maintains the frictional losses to a minimum. It enhances its efficiency so max output can be achieved from the operator's initiatives.
The hand-levers on all models, in the preliminary setting, are safely held by a maintaining spring. This is done to stop accidental dropping.
A few of its cons and also pros are:
ProsCons
Small in dimension and well dimensionedRequires manual work
Low-cost Can reduce 1 steel rod at once
Easy to useTime-consuming
Very crude

Slice Saw
A chop saw is a very vital tool when going over steel rod cutting.
It resembles a miter saw yet varies in its blade. The size of its blade is 14". It makes use of a sort of big carbide blade.
You have to change the speed of the tool to your desired setup as well as cut through the steel pole.
It is a single investment of concerning $50-$ 200, however this is among the most optimal options for reducing steel poles in a huge quantity.
The resulting cuts developed by the slice saw are smooth and extremely tidy. Shuanglong Machine is more accurate than the angled mill and the round saw.
The most typically marketed slice saws are from a renowned brand called Bosch Tools.
To summarize it all:
ProsCons
Uses a sharp blade for effective cuttingLarge blades could create drastic crashes
Adjustable speedUsed just for non-ferrous blades
Creates smooth and clean cutsMakes extremely loud noises
Can cut a number of sticks at onceVery hefty to relocate about

Portable Rod Cutter
One of the most recent innovations in the market is using the Portable rod cutter. It is a handheld portable gadget.
It is a small maker with a weight ranging from 22 kg to 32 kg. Its lengthiest dimension is 20 inches in length. This means even a solitary worker can deliver the device from one edge of the website to the various other.
It varies and also is an affordable machine from about $200 to $900.
It can deal with various source of power like electrical power, battery, or hydraulic power.
It can reduce up to # 8 steel rod Grade-60 in 5 seconds. The portable rod cutter can cut a solitary piece of rod in 5 seconds. The optimum number of poles it can hold is 2 rods of 16 mm.
It additionally has a lock trigger button for security. It is also wireless which can conserve a lot of tripping accidents at the website.
The very best component regarding this machine is that it does not create any kind of triggers or flame.
ProsCons
CordlessRequires technical skills to run
PortableElectricity kind calls for a resource of power
CheapCannot cut poles of more than 32mm dia
Different types can run on 3 different power sourceThe little size makes it easy to be taken
Does not create trigger or fire


Steel Rod Cutting Machine
The cutting maker is a large-sized device made use of by expert firms.
It evaluates 450-600 kgs however likewise has wheels to make it movable.
Its plus size makes it easier to cut rods with big diameters and also of more amount.
The expense of the machine varies from $500 to $1000.
The steel rod cutting maker utilizes a motor with a rate of 1450 RPM. It can puncture multiple steel rods like butter.
Each variation of the maker has a different limitation to the number as well as dimension of poles it can cut. The maker can hold steel poles up to 50mm and also even more. Its reducing frequency is 32 times per minute.
You can cut several poles using this device. The equipment is composed of a reducing clutch that enables the individual to manage the process.
Assistance braces are provided in the device to support the cutting procedure safely.
The device has a lifting ring that allows you to lug it anywhere you such as. The largest size of round rods any kind of device can reduce has to do with 50mm and also for TMT rods, it is 40mm.

ProsCons
Can cut all kinds of poles like round, angle, TMT and square rods.Higher rate, but an one-time cost
Hefty capacity motorHard to walk around
Gives the best and also cleanest cuts
Requires minimal effort
Excellent cutting ability

Pole Cutting Bandsaw
A steel rod cutting bandsaw is a maker with a double-column framework. It is readily available in both semi-automatic and also automated type.
It is a hefty equipment with a weight of even more than 1800 kg. It can reduce round rods, square poles, TMT rods, level poles, pipelines, as well as channel poles. It is additionally used for cutting different steel poles like iron, steel, aluminum, and bearing steel.
It deals with both electrical power as well as hydraulic principles.
The sawing equipment utilizes roller bearings as well as carbide blocks to assist the blades. This is done to extend the blade life. Its blade can be rotated as well as used for reducing both flat as well as up and down.
Its reducing capacity is can go greater than 500 mm. While the blade cutting can rise to 70m per minuter.
The machine possesses a 4 KW electric motor for the blade, a 0.75 KW motor for the hydraulic pump, and a 0.06 KW coolant pump. The major component of the rod cutting bandsaw is its gearbox. The entire functioning life of the maker relies on the gearbox.
Its rate ranges from $4000-$ 10000.
The major parts of the bandsaw are its workbench, the control board, the electric motor, as well as the operating lever.
It operates in the following fashion. All the support rods are linked together and laid on a long table. The factor at which the cut is to be made is put under the carbide blade. The rods are all at once swamped with water while cutting.
Reducing all the poles simultaneously saves a lot of time at the building and construction site.
ProsCons
Hydraulic control of work surface feedingVery heavy
Can reduce up to 500mm diaNeeds upkeep
Offers the very best as well as cleanest cutsExpensive
Can cut a whole lot of rods at onceRequires a big functioning room
The majority of time conserving


Final thought:
We discussed the advantages and disadvantages of all the above devices. It is crucial to understand that better pros than cons do not mean that the equipment is perfect. The pros and disadvantages of the equipment vary from consumer to consumer.
Some may not find the rate a problem. While some may find more lengthy devices the most significant trouble. Likewise, some may not appreciate the functions as well as security functions of a device.
This suggests that every client assigns a specific weightage to every variable. He makes his decision based upon these computations.
A customer whose only and leading concern is to promptly complete the procedure will not respect the price. A client whose just and top concern is to get the bare minimum will certainly choose the cheapest option.
Below is a fast purchasers overview or factors to take into consideration while acquiring a steel pole cutting equipment:
• Less time consuming
• Price.
• Cutting capability.
• Size.
• Quality of results.
• Safety Features.


These metal rods can be of any type of kind like iron rods, pipelines, or carbide poles.
An ideal steel cutting equipment will cut your rods faster, much easier, in mass, and reduced numerous types of steels.
The portable rod cutter can cut a single item of pole in 5 seconds. The maximum number of rods it can hold is 2 rods of 16 mm.
It can cut round rods, square rods, TMT poles, level rods, pipelines, and also network poles.
Homepage: https://www.machinesl.com/rebar-cutters/