Notes

4 Safety Tips For Doing Your Own Engine Oil Change
Before you do an engine oil change on your vehicle, there are a few steps that need to be taken. Not only will you need to know how to change the oil, but you also need to have a jack stand for safety and make sure that the car is parked under a level surface to avoid damage to the engine. The following steps will help you to change your own oil and to perform the necessary checks before beginning the job.
Before starting your engine oil change it is important to remove all of the accessories from the car including the battery, all of the wires and plug wires and make sure that there is no damage to any of these items. Once the accessories have been removed, the oil filter can be removed from the engine. You should remove the oil filter from the engine as soon as you can hear noise or if you feel water dripping when you turn the key in the ignition. You may also smell oil filtering chemicals if this is the case.
After removing the motor oil and filter, you should then drain the car of all the remaining fluid possible. If you are performing your engine oil change on a conventional engine, you should place a bucket underneath the engine and use a level to ensure that the level is at the "piping point". You should then remove the air filter from your car and place it inside the bucket. You will need to remove the synthetic oil from its location and place it in the new synthetic oil bucket.
When doing your engine oil change on a diesel engine, you will need to open up the diesel engine and consult the owner's manual to determine what type of intake manifold you have. In most cases, the intake manifold is simply attached to the muffler and is located near the firewall. Next you should remove the catalytic converter and fuel filter. Synthetic oil will be slotted into the engine and the conventional oil will slide right over the top of the synthetic oil. This will need to be done one time for each oil change.
For conventional engine oil changes you should inspect your vehicle for signs of damage before starting the process. If your engine is not running correctly or if you feel any kind of fluid leakage, you should pull off the fuel and start your engine. Synthetic oils require you to do the oil changes at recommended intervals which are based on the manufacturer's recommended range. If you perform your oil changes at less than the recommended intervals your vehicle can suffer from possible engine damage and/or damage to the battery.
Finally, if you are performing your own oil changes you should wear appropriate personal safety gear. You should always wear a seat belt and make sure that you always use the correct fuel when driving. If you are performing your own oil changes, you should always remember to put the vehicle in park before attempting to drain the oil in order to prevent overheating. By following these tips and by using the right type of fuel, you can protect your vehicle's engine and its engine oil.

Here's my website: https://www.valvoline.com/