Notes

/*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/

/dts-v1/;
#include "rk3288-evb.dtsi"
#include "rk3288-linux.dtsi"

/ {
compatible = "rockchip,rk3288-evb-rk808-linux";

backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55
56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103
104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135
136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151
152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167
168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183
184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215
216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 0>;
};

adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
poll-interval = <100>;
keyup-threshold-microvolt = <1800000>;

button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <18000>;
};

button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <300000>;
};

menu {
label = "Menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <640000>;
};

esc {
label = "Esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <1000000>;
};

home {
label = "Home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <1300000>;
};
};

gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;

pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;

button@0 {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "GPIO Key Power";
linux,input-type = <1>;
gpio-key,wakeup = <1>;
debounce-interval = <100>;
};
};

sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk808 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;

/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
};

wireless-bluetooth {
clocks = <&rk808 1>;
clock-names = "ext_clock";
};

/delete-node/ sdmmc-regulator;

vcc18_dvp: vcc18-dvp {
compatible = "regulator-fixed";
regulator-name = "vcc18_dvp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&vcc_io>;
};

vcc_otg_vbus: otg-vbus-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
};

vdd_log: vdd-logic {
compatible = "pwm-regulator";
rockchip,pwm_id = <1>;
rockchip,pwm_voltage = <1100000>;
pwms = <&pwm1 0 25000 1>;
regulator-name = "vcc_log";
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1360000>;
regulator-always-on;
regulator-boot-on;
};

xin32k: xin32k {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "xin32k";
#clock-cells = <0>;
};
};

&cif {
status = "disabled";
port {
/* Parallel bus endpoint */
/* cif_para_in: endpoint {
* remote-endpoint = <&cam_para_out1>;
* bus-width = <8>;
* hsync-active = <1>;
* vsync-active = <0>;
* };
*/

/* MIPI CSI-2 endpoint */
cif_mipi_in: endpoint {
remote-endpoint = <&csi_host_output>;
};
};
};

&cpu0 {
cpu0-supply = <&vdd_cpu>;
};

&csi_host {
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
csi_host_input: endpoint {
remote-endpoint = <&dphy_txrx1_out>;
data-lanes = <1>;
};
};

port@1 {
reg = <1>;
csi_host_output: endpoint {
remote-endpoint = <&cif_mipi_in>;
};
};
};
};

&dfi {
status = "okay";
};

&dmc {
center-supply = <&vdd_log>;
status = "okay";
};

&lvds {
status = "okay";
};

&lvds_panel {
compatible ="simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
enable-delay-ms = <10>;
rockchip,data-mapping = "vesa";
rockchip,output = "lvds";
rockchip,data-width = <24>;
pinctrl-0 = <&lcd_cs>;
power-supply = <&vcc_lcd>;
status = "okay";
bus-format = <0x100e>;

display-timings {
native-mode = <&timing0>;

timing0: timing0 {
clock-frequency = <51200000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <160>;
hsync-len = <4>;
hback-porch = <156>;
vfront-porch = <12>;
vsync-len = <3>;
vback-porch = <20>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
};

&video_phy {
status = "okay";
};

&gpu {
status = "okay";
mali-supply = <&vdd_gpu>;
};

&hdmi {
pinctrl-0 = <&hdmi_ddc>, <&hdmi_cec>;
};

&i2c0 {
clock-frequency = <400000>;

rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";

vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_io>;
vcc12-supply = <&vcc_io>;
vddio-supply = <&vcc_io>;

regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd_arm";
regulator-state-mem {
regulator-off-in-suspend;
};
};

vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
regulator-ramp-delay = <6000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};

vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};

vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};

vcc_tp: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
regulator-state-mem {
regulator-off-in-suspend;
};
};

vcca_codec: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
regulator-state-mem {
regulator-off-in-suspend;
};
};

vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};

vcc_wl: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
};

vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};

vdd10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
regulator-state-mem {
regulator-off-in-suspend;
};
};

vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};

vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
regulator-state-mem {
regulator-off-in-suspend;
};
};

vcc_sd: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
};
};

vcc_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_lcd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};

CW2015@62 {
compatible = "cw201x";
reg = <0x62>;
bat_low_gpio = <&gpio0 7 GPIO_ACTIVE_LOW>;
dc_det_gpio = <&gpio0 8 GPIO_ACTIVE_LOW>;
chg_ok_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44 0x46 0x49 0x48 0x32
0x24 0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D 0x52 0x52
0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
is_dc_charge = <1>;
is_usb_charge = <0>;
monitor_sec = <5>;
virtual_power = <0>;
divider_res1 = <200>;
divider_res2 = <200>;
};
};

&i2c1 {
status = "okay";
clock-frequency = <400000>;

mpu6050@68 {
compatible = "invensense,mpu6050";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mpu6050_irq_gpio>;
reg = <0x68>;
irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
mpu-int_config = <0x10>;
mpu-level_shifter = <0>;
mpu-orientation = <0 1 0 1 0 0 0 0 1>;
orientation-x= <0>;
orientation-y= <1>;
orientation-z= <0>;
support-hw-poweroff = <1>;
mpu-debug = <1>;
};

ak8963:compass@0d{
compatible = "mpu_ak8963";
reg = <0x0d>;
compass-bus = <0>;
compass-adapt_num = <0>;
compass-orientation = <1 0 0 0 1 0 0 0 1>;
orientation-x= <0>;
orientation-y= <0>;
orientation-z= <1>;
compass-debug = <1>;
status = "okay";
};
};

&io_domains {
status = "okay";
audio-supply = <&vcc_io>;
bb-supply = <&vcc_io>;
dvp-supply = <&vcc18_dvp>;
flash0-supply = <&vcc_18>;
flash1-supply = <&vcc_io>;
gpio30-supply = <&vcc_io>;
gpio1830 = <&vcc_io>;
lcdc-supply = <&vcc_lcd>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_wl>;
};

&i2c3 {
status = "okay";

vm149c: vm149c@0c {
compatible = "silicon touch,vm149c";
status = "okay";
reg = <0x0c>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
};

gc2145: gc2145@3c {
status = "disabled";
compatible = "galaxycore,gc2145";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&cif_dvp_d2d9>;

/* reset-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; */

/* pwdn gpio:
* for cam_para_out1: <&gpio2 14 GPIO_ACTIVE_HIGHT>
* for cam_mipi_out1(txrx1): <&gpio7 4 GPIO_ACTIVE_HIGH>
*/
pwdn-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
rockchip,camera-module-index = <1>;
rockchip,camera-module-facing = "back";
rockchip,camera-module-name = "CMK-OT1055-FG1";
rockchip,camera-module-lens-name = "NC";

clocks = <&cru SCLK_VIP_OUT>;
clock-names = "xvclk";

port {
/* Parallel bus endpoint */
/* cam_para_out1: endpoint {
* remote-endpoint = <&cif_para_in>;
* bus-width = <8>;
* hsync-active = <1>;
* vsync-active = <0>;
* };
*/

/* MIPI CSI-2 endpoint */
cam_mipi_out1: endpoint {
remote-endpoint = <&mipi_sensor_input>;
data-lanes = <1>;
clock-lanes = <0>;
clock-noncontinuous;
};
};
};

ov13850: ov13850@10 {
compatible = "ovti,ov13850";
status = "okay";
reg = <0x10>;
clocks = <&cru SCLK_VIP_OUT>;
clock-names = "xvclk";

pinctrl-names = "default";
pinctrl-0 = <&isp_mipi>;

reset-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
pwdn-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
rockchip,camera-module-name = "CMK-CT0116";
rockchip,camera-module-lens-name = "Largan-50013A1";
lens-focus = <&vm149c>;

port {
cam_out: endpoint {
remote-endpoint = <&mipi_in_cam>;
data-lanes = <1 2>;
};
};
};
};

&isp_mmu {
status = "okay";
};

&mipi_phy_rx0 {
status = "okay";

ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;

mipi_in_cam: endpoint {
remote-endpoint = <&cam_out>;
data-lanes = <1 2>;
};
};

port@1 {
reg = <1>;

dphy_rx0_out: endpoint {
remote-endpoint = <&isp_mipi_in>;
};
};
};
};

&mipi_phy_tx1rx1 {
status = "disabled";

ports {
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
mipi_sensor_input: endpoint {
remote-endpoint = <&cam_mipi_out1>;
data-lanes = <1>;
};
};

port@1 {
reg = <1>;
dphy_txrx1_out: endpoint {
remote-endpoint = <&csi_host_input>;
};
};
};
};

&rga {
status = "okay";
};

&rkisp1 {
status = "okay";

port {
isp_mipi_in: endpoint {
remote-endpoint = <&dphy_rx0_out>;
};
};
};

&rockchip_suspend {
rockchip,pwm-regulator-config = <
(0
| PWM1_REGULATOR_EN
)
>;
};

&route_lvds {
status = "okay";
};

&route_hdmi {
status = "okay";
};

&sound {
status = "okay";
};

&pwm1 {
status = "okay";
};

&pinctrl {
backlight {
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

buttons {
pwrbtn: pwrbtn {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};

mpu6050 {
mpu6050_irq_gpio: mpu6050-irq-gpio {
rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

usb {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};

&usb_otg {
vbus-supply = <&vcc_otg_vbus>;
};