Notes

Water in the Engine? Check the Yamaha Thermostat First
If you are confronted with water in an engine, the starting point to look prior to taking apart the engine and also looking for a porous block, cracked head, eroded exhaust-water flow, icy oil cooler, or other labor-intensive concerns, is the Yamaha thermostat. Keep in mind that some engines have two thermostats, like Yamaha's V-engines.

To find Upgrade Aluminum Outboard Propeller 13 tooth (s), make sure to refer to the solution manual as the area differs by engine. 10.25 x16-G that you should put the thermostat in a pot of hot water and also check if it opens and shuts at the right temperature level. If you do not have access to this approach, after that an infrared temperature weapon can be utilized at the thermostat housing to get an indication of engine temperature level. Once again, describe the service guidebook for the right temperature operating range.


If you have actually identified that the engine is running cool, it's a great indicator that the thermostat is stuck open. Remove the thermostat real estate as well as inspect it. If it is stuck open, replace the thermostat with a new one and be sure to do several oil and filter adjustments to make sure water is eliminated from the engine's oil.

You could be asking yourself just how water gets involved in the oil because of a thermostat being stuck open. If the engine is running cool, the warm oil meeting a chilly engine can generate condensation. The condensation eventually condenses into water as well as falls into the oil. With an engine running cold, water isn't the only contaminant getting involved in the oil. The piston rings (running cold) won't completely increase to extensively seal versus the cylinder wall surface, and also might allow a tiny portion of raw gas to constantly seep previous them as well as accumulate in the sump. Long term keeping up this condition can cause the oil to establish a milklike residue. Debris can likewise obtain embeded thermostats and also prevent them from withdrawing back to the shut placement.

If you think water in the engine oil, there are a number of quick means to examine. One way is to remove and also consider the bottom of the oil cap to see if there's wetness in it. 10 1/4x16 is to pull out the dipstick to look for dampness in the oil. Either technique is effective. Yamaha thermostat problems can be prevented by purging the engine on a regular basis per the owner's guidebook.

Here's my website: https://vifprop.com/products/10-3-8-x-13-13-spline-tooth-48-73136a45-48-73136a40-oem-upgrade-aluminum-outboard-propeller-fit-mercury-engines-30-70hp-25hp-bigfoot4-stroke-rh