Notes

What's Holding Back From The Double Glazed Window Repair Industry?
Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that prevents heat loss in the winter months and helps keep your home cool in the summer. Repairing your double-glazed windows when necessary is a great way to keep them in good working order.

Over time, your double-glazed windows may suffer from issues like condensation and misting. This can cause your double glazed windows to be difficult to open or shut.

Broken Panes

A rogue baseball or a flying pebble from your lawnmowers, or even a storm that is heavy could break the double panes of your windows and expose your home to the elements. While a cracked window can be difficult to fix however, you don't have to have it replaced entirely. The insulated glass that is between two panes of glass is in good condition, so you can repair your double-paned windows yourself.

To begin, you'll need remove the broken glass from the frame. Be careful to prevent glass shards from falling to the floor or falling from the frame. Make sure to wear a pair of gloves to protect your hands and a rag to cover the area around the broken glass to avoid further cuts or breakage. After removing the broken piece take care to clean the entire frame of the window to eliminate any remaining sealant and debris. Sand rough areas of the frame to create a smooth and even surface to install your new window.

After cleaning the frame and dried, you can apply a fresh layer of glazing to the seam in which the broken pane was removed. This is the most effective method to seal and protect your window, and will reduce your energy bills by preventing water and drafts from entering the home. The next step is to choose the right glazing material. There are a variety of options including clear tape which is more durable than regular tape and helps prevent further cracking of your window or glazing film which is similar to clear plastic wrapping. The benefit of this option is that it can be painted to match your frame, and it will keep out rain and snow as well.

Regardless of the material you pick, it is important to press the glazier's points into the seam where the putty meets the frame. These will hold the new glass in place and aid it stick to the frame. Hardware stores sell glazier's ropes, which you can use on the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues and if you encounter this issue, it is best to contact the company that installed the window. There are warranties and guarantees that cover these problems. Condensation or fogging between the windows' panes is a sign that your seals are damaged. Only a professional can fix this issue by replacing the panes.

This procedure is a bit tricky and requires the use of specific tools to remove the old pane and install the new one, but it can be done by a professional who will provide the required equipment. Making use of these tools can be dangerous, so it is always best to leave this kind task to professionals.

Wear safety glasses and gloves if you decide to do it yourself. You could be exposed to flying glass fragments. It is also important to carefully remove all putty and metal glazing points from the grooves in which the new window will be. Wire-brushing the frame, vacuuming or wiping with a damp cloth is recommended. After the frame is dry, you'll need to order another piece of glass that's 1/8" shorter in both directions than your existing window. Make sure the glass fits into the grooves.

You'll need to apply a layer silicone caulk in the grooves of your frames to ensure that your glass is secure in its installation. After the caulk dries it is time to smooth it out and make any needed adjustments. The wood molding can be reinstalled.

If window repair , double-glazed windows can be difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or contract, causing them to slide and become stuck. Try wiping the frames with water and then lubricating them when this happens, but it may be better to consult the company that installed your windows.

Misted

When moisture gets trapped in between the glass panes, it can cause misty double glazing. Double glazing consists of two glass panes that are separated by an insulating space, typically filled with argon gas for improved thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside which allows you to keep the temperature at a comfortable level in your home.

Over time however, this seal will begin to break down and moisture will start to accumulate between the window panes, causing them to turn misty. This occurs because the sun heats the gap between the panes of windows, causing water to vapourize.

This is a natural process however if it occurs between the panes of the window it could be a problem because it will no longer be able to regulate the temperature within the room. Instead the temperature outside the window will affect the temperature indoors. Northfield Glass can help you when your double-glazed windows begin to mist.

We can repair the individual blown sealed unit without needing to replace the entire window and is less disruptive than a total replacement. Our misty glass repair involves removing and cleaning the glass unit, then replacing it with a new one. This creates a watertight seal again.

Some companies in the industry claim to inject chemicals through holes into windows with mist to remove the fog and condensation. We don't recommend using this method. This method is not just ugly, but it could also harm your toughened glass leaving you with a window which doesn't function properly.

It is important to fix the problem as soon as possible, as left untreated, it could cause mould growth that not only damages the window, but can also pose health risks to your family. The condensation in the window could cause other problems in your home like damp or rot. In some cases it might be necessary to replace the entire window.

Blown or Failed

Modern double-glazed windows come with two glass panes with an inert gas or air in between them. This improves their thermal efficiency by keeping heat in and the cold out. Over time, the gas can depressurize and cause a variety of problems.

One of the most common is condensation that forms between the panes. It's not a sign of a window failure however it could be a sign you need to reseal the panes. Condensation could also be an indication of a damaged double glazing, which could require a re-installation.

It is also important to look for draughts coming from your double glazed windows. This could be due to a failed seal, a broken handle, or a broken lock. It is essential to fix the issue as quickly as you can. A draught will cause you to spend more on heating. Check the seals around the window frame by smelling cold air.


Another sign that your window seals have failed is when you begin to notice water beading on the inside of your windows. This is a good indicator that you need to seal your double-glazed windows.

The window frames you have purchased were designed to move slightly and this is essential to keep the glass sheets in their place. In time, this special packaging material can be compressed. This can cause the seal to become broken. This will allow air to circulate between the panes, reducing the efficiency of your window's energy consumption.

Double glazing that has blown a seal is a sign of failure and should be fixed as soon as is possible. A blown seal stops your double glazing from performing its primary purpose which is to keep cold air out and warm air in. A damaged seal could let moisture in your home, which could cause mold and other unpleasant conditions. It is recommended to contact a double glazing repair specialist immediately if you spot a damaged seal in your double-glazed windows, since they could replace the whole unit.

Website: https://www.repairmywindowsanddoors.co.uk/sutton-windowrepair/