Notes

Ten Startups That Will Revolutionize The Repairs To Upvc Windows Industry For The Better
Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the distance between the window and the door is significant, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To do repair my windows and doors , you'll need to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash need to align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if awake each day to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.


Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is essentially a simple process but it can be easier to do with someone else to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular manner or because of poor installation at the factory. Sending us photos via our website will often solve the issue. We are always happy to give suggestions.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, causing an opening between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, can also become misaligned, again it's possible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.

Homepage: https://www.repairmywindowsanddoors.co.uk/bigginhill-windowrepair/