Notes

10 Unquestionable Reasons People Hate Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism broken? Perhaps the window or door handles aren't able to connect properly or are difficult to use.

It is essential that your double-glazed doors work smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock for a reasonable price.

Snapped Key

It can be frustrating when a key gets stuck into the lock. It's also potentially a security risk, as the door might not lock and make you vulnerable to intruders. There are a few easy fixes you can try to fix the problem and make your door work again.

Be sure to remain calm. If you get scared and start poking around wildly, you might just end up pushing the damaged piece of the key even further into the lock, making the situation much worse.


Then spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be hindering the flow. If you happen to have a little bit of the key hanging out and you want to remove it, use a paperclip or some other thin metal object to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that could serve as hook extractors and jigsaw blades are also suitable for this purpose. If you don't have any of them available, you can use needle-nose pliers to bend and create hooks. Additionally, you can use a pair tweezers to grab and pull out the last piece of broken keys.

If you're unable to pull the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and works by freezing any moisture present in the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them easier to operate. Book a double glazing repair via our website, or give us a call to discuss your requirements.

Broken Cylinder

A broken cylinder can be a serious security risk. It's a good thing that it's a simple repair for an expert locksmith to complete. To fix the cylinder, locksmiths must tap it. They can do this with an hammer or another tool, but the most efficient method is to employ a long match or a piece of wire. Then, position the end of the match or wire near the keyway. After this, the locksmith can strike the lock and break it open. This is superior to using a hammer, which can harm the lock.

The most frequent cause of cylinder head cracks is overheating. This can occur when the cylinder block and cylinder head are made from different metals, including cast iron and aluminium. When the different metals are heated and cool at different rates, it could cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion is another possible reason for fractures in cylinders. If the head and block of a cylinder are not maintained properly they may corrosion or rust and cause them to expand more than expected. This can cause cracks in the future.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, this could be due to a number of things. This problem can be caused by a malfunctioning locking mechanism or misalignment, or a worn-out handle.

Fortunately it's a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith will usually be able solve the issue within an hour of arriving at your property. Depending on your needs they will be able to replace the locking mechanism, replace the window handles, or change the gearboxes. A professional locksmith can always advise you on the most cost-effective solution for your home. double glazing repairs near me may recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra layer of protection from burglars. It's a small price to enjoy the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They are equipped with complex mechanisms that wear out over time. It isn't easy to determine the reason behind the broken window handle lock and then fix it properly.

Repairing your damaged handle, whether it's the internal locking mechanism or latch, will improve the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could harm the door's frame as well as lock, so it's worth taking some time to do it right.

With the window in the open position, loosen the screw that holds the handle by using the screwdriver. The screw should be on the inside of the back plate, which is usually covered by an aesthetically pleasing cover for the screw reasons. You should not be able to replace any internal parts of the handle such as the plates and levers on either side. Keep them in the same order so that it is simpler to replace them in the event of a need.

Next, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is loose, remove the handle and take out the broken spindle. Replace this with a new one, making sure that it's the same size as the previous one (you can typically find these on the internet or at hardware stores) and then securely screw it in place. Be careful not to tighten too much as this could damage the handle or the window frame.

Check that the new handle is fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able to open your window again.

While you're working on the handle, don't forget to check your uPVC windows are closing properly. If they aren't closing correctly, you could encounter draughts or damp in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on the frames of your windows to ensure they close properly.

Broken Spindle

It is often the case that the spindle in the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the frame of the window. The handle is connected to a centre rod that is then activated by a series of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open when the handle is turned it is possible that the spindle is broken This can be a frustrating problem.

Luckily, there are steps that can be taken to rectify this issue. A professional locksmith can quickly and effectively address this problem. They will be able to disassemble the window handle by using a tool that can remove the wheel portion of the mechanism, where the spindle goes. This can be done without damage to the handle or window frame.

Once the wheel has been removed, the technician will inspect the spindle and determine what has caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition, as in addition to any specific areas of wear or damage. This process is usually carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle, this will remove any debris or dirt that could be hindering its normal operation. The spindle could be replaced or repaired. If it is being replaced the technician could use an identical dowel size to the original and drill mating holes into both parts of the spindle. This will ensure that the new spindle has a precise fit with the handle.

If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centers sell generic replacements, but if the style of your window is unusual then you will need to contact a wood worker or cabinet maker who can replicate the exact model for you. Once the spindle has been installed, it is connected to the handle. Line up the screw holes on the handle to the screws already in the frame. Once double glazing repairs is firmly installed, you are now ready to operate your uPVC window.

Here's my website: https://www.metooo.io/u/65e4539b177b1830a252a74b