Notes

What's Holding Back What's Holding Back The Window Handle Repair Industry?
Window Handle Repair

The handles of the window could be broken or loose that makes the window open to burglars. It's usually not difficult to repair.

Take off the plastic caps at the top and the bottom of the handle. This is an easy task that shouldn't take longer than five minutes with a screwdriver.

Loose Screws

Over time, a window handle may become loose from wear and tear or use. If it feels wobbly or you notice that it is difficult to open it or close it, it could be that the screws are loose and need a bit of tightening. This is a simple fix that can be completed in just a few minutes using the help of a screwdriver.

First, remove any plastic caps that cover the screws on the top and the bottom of your handle. These can be removed with a fingernail or a screwdriver with a flat head. Once the caps have been removed then tighten the screw on top until it is secured. Don't over tighten the screw since it could cause damage to the head. Then, tighten the top screw in the same manner. After both screws have been tightened, the handle should be sturdier and be able to open with less difficulty.

If your window handle feels extremely loose or the lock paddle isn't able to be inserted, then it's time to get an upgrade to the crank mechanism. Mail order is available from many hardware replacement experts. It's cheaper than replacing the entire handle. You can also tighten the crank by opening the window and then adjusting the crank arm until it is aligned with the notch on the guide track. After firmly pushing in the handle, take off any trim mounting screw and lift the casement off the window jamb. ( repairing double glazed windows ) You'll need to replace any bent or rusted trim screws. Compare the new one with the old one to ensure they match and then install it in the manner shown in Photo 5.

Filling screw holes that are not completely filled with wood before tightening them may be necessary. Choose a filler that is slightly larger than the screw hole to ensure it will bite into the surrounding wood when you twist it into the right direction.

Broken Spindle

The spindle of your window handle may wear out after a certain amount of time. This could cause the handle to malfunction or stop opening properly. Fortunately, replacing the spindle is an easy and easy fix that can be done by anyone with some basic tools. It is also important to examine the alignment of the handle to ensure that it is securely held in its place.

After cleaning it is a good idea also to apply a silicone-based oil to the handle and spindle. This will enable it to move more easily, clearing any debris or dirt that could be hindering the work.


A common issue that is common to uPVC windows is the failure of the locking mechanism. This occurs when the handle doesn't push the spindle across the wedge block in a proper manner. This can be a significant problem as it could prevent your window from closing or opening. It is necessary to replace the lock or handle.

It is essential to measure the spindle length before buying a replacement. This will allow you to find the perfect replacement handle that is compatible with the old one. The measurements on the bottom of the handle however, if they are not there you can always call us and we'll quickly identify the model over the phone to ensure that you are buying the right one for your windows.

You can also buy a complete set of replacement handles and spindles to save some time and money. These are usually cheaper and can be installed in a shorter amount of time.

It may be time to speak with an expert If your uPVC tilt-and-turn windows are closed even after you've tried all these solutions. A trained uPVC expert can inspect the handle for any issues and provide you with estimates for repair.

Our range of replacement uPVC handles includes espag, inline, key locking, cranked, and cockspur styles. We stock a variety of uPVC handles and aluminum handles in a variety of finishes. We can even purchase specific designs for you if we do not have them in stock.

Broken Handle

If the uPVC window handle does not open at all, this could be due to a damaged handle. This is usually because the handle is broken internally, preventing it from grasping the spindle. It is unable to operate the window. This problem is common with uPVC handles. It is easily fixed by removing the handle and replacing it.

This usually requires the use of a screwdriver as well as some elbow grease but is possible to do it at home, without professional help. To remove the handle, use a screwdriver to lift the plastic cap. This will reveal the top and bottom screws on the base of the handle. Utilizing the screwdriver tighten the top screw until it is secured. Don't over tighten the screw as this may harm the handle or the frame of the glass.

You can replace the second screw after you have ensured that the handle is securely attached to the base. Tighten it until it is secure. Replace the caps on both screws, and your aluminium handle should now function exactly as it was intended to.

Another reason why the uPVC window handle isn't open is because of a worn-out gear in the cranking mechanism. The handle may turn, but not move the window made of uPVC. This can be frustrating and dangerous to your safety. In this instance it is recommended to replace the mechanism for operating.

This process is fairly easy and should take only two minutes. If you're not comfortable with this process or want to employ experts, the staff at Bridgewater Glass are happy to help. We have years of experience with repair and replacement, and we can make sure that your windows are safe and working exactly as they should. Contact us today to discuss our services and find out more about how we can assist you.

Broken Base

The window handle could become loose as time passes. Occasionally, it can cause the window to sag or open when it is it is opened. If this happens, it is usually because one of the screws isn't tightening the mechanism to the frame. This is an easy fix, just loosen the screw with the help of a screwdriver, and then tighten it. Close the window, and then move the handle into place.

Sometimes, a handle can break completely off the base section. This is a possibility when using tilt-and-turn or standard handles. It is extremely uncommon and is usually only seen in areas that are heavily used. This is a straightforward fix that can be accomplished by replacing the old device.

Another common problem is the stripping of the handle teeth. This is a common problem in older windows with the crank handle. The teeth, which are generally made of cast iron, can be stripped away due to excessive use or age. This is a simple fix and can be done with a small vise grip or a pair of pliers.

If your handle splits off from the base and you need to remove the crank mechanism to get access and replace the handle. It's a bit difficult for a novice DIYer to do, but it is possible.

Remove the screw that secures the crank operator to your window frame. Then, you can open the window until the crank arm guide bushing is aligned with the track's notch. Then, using a pair of pliers, push the window and slide the guide bushing off the crank arm.

After you have removed the old handle and inspecting the crank stud to see whether the teeth are worn. Next, inspect the handle for signs that it's worn. Family Handyman advises that if the splines are worn out, you should replace the window crank handle.

To attach the new window crank handle, re-attach the trim cover to the frame and reattach any rusted screws. Install the base plate by securing the remaining screws. Make sure that the holes for the mounting screws match the mounting holes of the new handle. Be sure to not over tighten the screw because this could cause the swivel and nylon roller to detach from the track.

Read More: https://www.repairmywindowsanddoors.co.uk/