Notes

How to Change A Dead Motion Sensor Light Switch
What is a Motion Sensor Switch? While motion sensors have been around for a while however, they have not yet become a standard part of the home system. This seems to be a mistake in some ways. In other words the switches are an excellent idea and will do a lot of good in a variety of applications. However, in other situations they're not recommended for the reasons listed below.
What to do if do not intend to use motion sensor switches: In general, you must install the switch as it is. This will eliminate any issues with installation. There are times when a technician can make an error and not be able to install the switch correctly. In these situations you'll have to learn how to install it. It's possible to make a mistake and forget to cover the reset switch. If you don't have a plate with the ground and power leads, then the wires that connect to the wall might be damaged and you'll have replace the wiring. Do not do it - put the wires back in place and install your motion sensor switch installed as you normally would.
How To Do It If You Have An Old Switch And You Like It Still: A way of doing this that avoids any mounting challenges is to purchase an older motion sensor switch, take off the cover plate and then stick it to the wall. This is a good option for switches that are made of steel or brass (or any other material that is less susceptible to corrosion). It won't work if your switch is made of aluminum. You can remove the cover plate if your switch is constructed of wood or plastic (or any other material that is less likely to corrode). Stick it to the wall.

Screws are also possible in the absence of a cover plate. If pir motion sensors 're not sure how to accomplish the task safely, you could use some metal screws to secure the sensor switch. To ensure that the screw doesn't escape, you might have to use electrical tape. If you aren't sure about how to use screws you can use electrical tape to cover the screws' heads. head.
How to make your Motion Sensor Light Switch Automatically Turns On And Off: After you've put in your new sensor switch, it will simply be a matter of making sure it is in the correct mode. Your lights can tell when something is present by using two different modes. The first is triggered by movement, while the second is triggered is caused by something that is in the vicinity. Your motion sensor light switch will typically detect movement and turn on the light.
Connect your sensors and wires with your new switch. Check it to make sure that it functions as expected. Then, you can disconnect your old switch and connect the new one. Or, connect the wires to the old switch and then put the motion sensor switch back in the correct position. Follow the same steps to set up your new switch, just like the old one.

Read More: https://rayzeek.bandcamp.com/album/motion-sensor